Home Styles 88 5530 181 User manual

Hardware List
M.
Keyboard Rail
1 pc.
N.
Keyboard Rail
1 pc.
O.
Keyboard Support
1 pc.
P.
Keyboard Support
1 pc.
Q.
Keyboard Support
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
88 5530 181
Pedestal Desk
Naples
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5530 182
Part List
Cam Lock
48 pcs.(+6 extra)
Cam Lock Screw
48 pcs.(+2 extra)
Pull Handle
7 pcs.
Machine Screw
7 pcs.
Head Cap Bolt
8 pcs. (+1 extra)
Hex Wrench
1 pc.
Wood Screw (short)
for drawer base
16 pcs.(+1 extra)
Wood Screw (long)
for side drawer
36 pcs. (+1 extra)
Wood Screw (long)
8 pcs. (+1 extra)
Wood Screw (short)
6 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Adjustable Pin
4 pcs.(+1 extra)
K.
Keyboard
1 pc.
L.
Keyboard
1 pc.
Wood Screw
for Magnet
2 pcs.(+1 extra)
Magnet
1 pc.

Part List
B.
Side Panel
.1 pc D.
Side Panel
.1 pc
E.
Side Panel
.1 pc
S.
Door
1 pc.
C.
Side Panel
1 pc.
H.
Base
2 pcs.
I.
Back Panel
2 pcs.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Tools required for assembly : Phillips screwdriver
Also need the following from carton 88 5530 181 :
Hardware List in carton 88 5530 181
Small Hex Wrench
Hex Wrench
Cam Lock Screw
Cam Lock
Head Cap Bolt
Wood Screw (short)
Wood Screw for hinge (short)
Wood Screw for Plinth (long)
Wood Screw for Magnet
Magnet
Wood Screw (long)
Adjustable Pin
Pull Handle
Machine Screw for Pull Handle
Part List in carton 88 5530 181
Top (A)
Keyboard (K)
Keyboard (L)
Keyboard Rail (M)
Keyboard Rail (N)
Keyboard Support (O)
Keyboard Support (P)
Keyboard Support (Q)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
50 pcs.
54 pcs.
9 pcs.
17 pcs.
37 pcs.
7 pcs.
9 pcs.
3 pcs.
1 pc.
7 pcs.
7 pcs.
5 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
T.
Drawer
2 pcs.
(Knock-Down Construction, please refer to the last page of these instructions for drawer assembly steps)
F.
Front Rail
2 pcs.
G.
Front Rail
1 pc.
J.
Plinth
2 pcs.
R.
Shelf
1 pc.
U.
Drawer
1 pcs.
V.
Drawer
1 pc.
W.
Metal Strip
2 pcs.
88 5530 182
Pedestal Desk
Naples

Assembly Instructions 2/8
IMPORTANT
You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Insert Cam Lock Screws into
the pre-drilled holes of Top (A),
Side
(See figure 1)
Panels (B) and (C), (D) and (E),
Keyboard Box (O), Back Panels (I) and Plinths (J).
A
Cam Lock Screw
Wood Screw
for Magnet
Magnet
B
C
D
E
Attach Magnet to Side Panel (C) by using
Wood Screws (short) in the pre-drilled holes.
Figure 1
O
I
J

Assembly Instructions 3/8
Cam Lock Screw
Cam Lock
Cam Lock Screw
Cam Lock
Wood Screw
(long)
Wood Screw
(long)
B
C
J
I
I
H
H
F
F
STEP 2
STEP 3
Attach Front Rails (F), Base (H), Back Panel (I)
and Plinth (J) to Side Panel (B) with Cam Locks. (See figure 2)
Attach Side Panel (C) to unit with Cam Locks.
Insert 4X Wood Screw (long) into the pre-drilled holed of unit and tighten.
Attach Front Rails (F),(G) Base (H),
Back Panel (I) and Plinth (J) to Side Panel (D) with Cam Locks. (See figure 2)
Attach Side Panel (E) to unit with Cam Locks.
Insert 4X Wood Screw (long) into the pre-drilled holed of unit and tighten.
Figure 2
G
D
E
J

Assembly Instructions 4/8
I
Head Cap Bolt
M
O
P
N
STEP 4
Assemble Keyboard Rails (M) and (N),
Keyboard box (P) and (Q) with Head Cap Bolts. (See figure 3)
Attach Keyboard Support (O) to unit with Cam Locks.
Attach keyboard Support in between both units from Steps 2 and 3 with Head Cap Bolts.
Figure 3
A
K
J
STEP 5
Attach Keyboard (K) to
Keyboard (L) with
Wood Screws (short).
(See figure 4)
Slide keyboard into position.
Place Top (A) onto unit
with Cam Locks.
Figure 4
Q

Assembly Instructions 5/8
STEP 6
STEP 7
Place Metal Strips (W) into position.
You can adjust the Metal Strip for
letter size or legal size files as shown.
Legal Size
Letter Size
Figure 6
Figure 7
Figure 5
S
T
T
U
Insert Adjustable Pins into side panels at the
desired level. (See figure 5)
Place Shelf (R) into position.
Attach Door (S) by sliding the door lift hinges into the
side panels lift hinges. (See figure 6)
Assemble Pull Handle to Door with Machine Screw.
(See figure 7)
Slide Drawers (T), (U), and (V) into position.
V
W
W
R

T5.
Base Part
2 pcs.
T2.
Back Part
2 pcs.
T3.
Side Part
2 pcs.
T4.
Side Part
2 pcs.
Assembly Instructions 6/8
Figure 1
Figure 2
MAKE SURE ROLLER
IS ON THE BACK
T2
T2
T2
T3
T3
T3
T4
T4
T4
T5
T5
T1
T1
T1
Drawer (T)
Part List
Figure 3 Figure 4
Attach T1 to T3 and T4,
using a
and wood screws ,
tighten halfway.
Attach T2 to T3 and T4 using
wood screws ,
tighten halfway. (see Figure 1)
Phillips screwdriver
(4X)
(4X)
long
long
Insert wood screws (4X)
into the pre-drilled holes in T5,
tighten screws. (see Figure 3)
short
Slide T5 into the grooves in T3
and T4. Be sure to push T5 all
the way forward so it meets T1.
(see Figure 2)
STEP 1
STEP 2
STEP 3 STEP 4
Tighten all screws used in drawer assembly.
Assemble Pull Handle with
machine screws. (see Figure 3)
T1.
Front Part
2 pcs.

U5.
Base Part
1 pc.
U2.
Back Part
1 pc.
U3.
Side Part
1 pc.
U4.
Side Part
1 pc.
Assembly Instructions 7/8
Figure 1
Figure 2
MAKE SURE ROLLER
IS ON THE BACK
U2
U2
U2
U3
U3
U3
U4
U4
U4
U5
U5
U1
U1
U1
Drawer (U)
Part List
Figure 3 Figure 4
Attach U1 to U3 and U4,
using a
and wood screws ,
tighten halfway.
Attach U2 to U3 and U4 using
wood screws ,
tighten halfway. (see Figure 1)
Phillips screwdriver
(4X)
(4X)
long
long
Insert wood screws (4X)
into the pre-drilled holes in U5,
tighten screws. (see Figure 3)
short
Slide U5 into the grooves in U3
and U4. Be sure to push T5 all
the way forward so it meets U1.
(see Figure 2)
STEP 1
STEP 2
STEP 3 STEP 4
Tighten all screws used in drawer assembly.
Assemble Pull Handle with
machine screws. (see Figure 3)
U1.
Front Part
1 pc.

Assembly Instructions 8/8
Part List
V1.
Front Part
1 pc.
V5.
Base Part
1 pc.
V2.
Back Part
1 pc.
V3.
Side Part
1 pc.
V4.
Side Part
1 pc.
Figure 1
Figure 2
V2
V3
V2
P2
V3 P3
V4
V4
V5
V5
V1
V1
Drawer (V)
Figure 3
Figure 4
Attach V1 to V3 and V4
using a
and wood screws ,
tighten halfway.
Attach V2 to V3 and V4 using
wood screws ,
tighten halfway. (see Figure 1)
Phillips screwdriver
(6X)
(6X)
long
long
Insert wood screws (4X)
into the pre-drilled holes in V5,
tighten screws. (see Figure 3)
short
Slide V5 into the grooves in V3
and V4. Be sure to push V5 all
the way forward so it meets V1.
(see Figure 2)
STEP 1
STEP 2
STEP 3
STEP 4
Tighten all screws used in drawer assembly.
Assemble Pull Handle
with machine screw.
(see Figure 4)