Home Styles 88 5662 89 User manual

Part List
B.
Seat
1 Pc.
C.
Leg
1 Pc. E.
Stretcher
1 Pc.
F.
Stretcher
2 Pcs.
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Tools required for assembly : Phillips screwdriver
M8x32
Wood Screw
6 Pcs. (+1 extra)
M4
1 Pc.
M6x95
4 Pcs. (+1 extra)
Flat Washer
10 Pcs. (+1 extra)
A.
Back Rest
1 Pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5662 89
Bar Stool
M6x45
Head Cap Bolt (short)
2 Pcs. (+1 extra)
D.
Leg
1 Pc.
M6x55
Head Cap Bolt (middle)
4 Pcs. (+1 extra)
Head Cap Bolt (long)
Hex Wrench
M4
Small Hex Wrench
1 Pc
Spring Washer
10 Pcs. (+1 extra)

Assembly Instructions 2/3
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled
* You should keep Wrench in a safe place as you may need top tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
STEP 2
Attach Stretcher (E) to legs
(C) and (D) with Wood Screws.
STEP 1
Attach Seat (B) to Back Rest (A) with Head Cap Bolts (long), Head Cap Bolts (short), Spring Washers
and Flat Washers. The Head Cap Bolts must be completely tightened using the Hex Wrench.
Insert Wood Screw into the pre-drilled hole of Back Rest (A).
C
D
E
A
BHead Cap Bolt (short)
Spring Washer
Flat Washer
Head Cap Bolt (long)
Spring Washer
Flat Washer
Wood Screw
Wood Screw

STEP 3
Attach Stretchers (F) and unit from Step 2 to unit from Step 1 with Wood Screws,
Head Cap Bolts (middle), Spring washers and Flat Washers.
Assembly Instructions 3/3
A
F
F
Figure 2
Figure 1
B
Head Cap Bolt (middle)
Spring Washer
Flat Washer