Home Styles 20 05214 0095 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
20 05214 0095
Kitchen Cart
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Small Hex Wrench
1 pc.
Hex Wrench
1 pc.
M6x30
Head Cap Bolt
8 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
8 pcs. (+1 extra)
Adjustable Pin
4 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
6 pcs. (+1 extra)
Handle
1 pc.
M4x25
Machine Screw
2 pcs.
C.
Side Frame
1 pc.
A.
Top
1 pc.
B.
Side Frame
1 pc.
G.
Shelf
1 pc.
D.
Back Panel
1 pc.
I.
Drawer
1 pc.
Cam Lock Screw
12 pcs. (+1 extra)
Cam Lock
12 pcs.(+2 extra)
E.
Front Rail
2 pcs.
Caster
2 Locking
2 Non-Locking
4 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
H.
Towel Bar
2 pcs.
F.
Base
1 pc.

Assembly Instructions 2/4
STEP 1
Insert Cam Lock Screws
into pre-drilled holes of Top (A)
and Side Panels (B), (C),
then tighten.
(See Figure 1)
Figure 1
Cam Lock Screw
Cam Lock
B
C
IMPORTANT
·Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.·
Do not tighten all the bolts until each part is properly assembled.·
Keep Hex Wrench as the bolts may need to be tightened in the future.·
A
E
E
C
B
D
F
Head Cap Bolt
STEP 2
Attach Front Rails (E) and Back Panel (D)
to Side Frame (B) with Cam Locks. (See Figure 2)
Attach Base (F) to unit with Head Cap Bolts. (See Figure 3)
Attach Side Frame (C) to unit with Cam Locks and Head Cap Bolts.
Figure 2
Figure 3

Part ListPart List
Assembly Instructions 3/4
Drawer (I)
I2.
Drawer Back
1 pc.
I5.
Drawer Bottom
1 pc.
I3.
Drawer Side
1 pc.
I4.
Drawer Side
1 pc.
STEP 5
Attach Handle with Machine Screws.
I1
I3
I4
I5
STEP 4
Slide Drawer Bottom (I5) into the grooves
of Drawer Sides (I3) and (I4) until it meets
Drawer Front (I1).
Attach Drawer Bottom (I5) to unit with
Wood Screws (short).
STEP 3
Attach Drawer Front (I1) and Drawer
Back (I2) to Drawer Side (I3) with
Wood Screws (long).
Attach Drawer Side (I4) to unit with
Wood Screws (long).
Wood Screw (short)
Bottom
I1
I3
I4
I2
Machine Screw
Wood Screw (long)
Roller at back
Handle
I1.
Drawer Front
1 pc.

Assembly Instructions 4/4
STEP 7
Turn unit to its’ upright position.
Attach Towel Bars (H) to
unit with Head Cap Bolts.
Attach Top (A) to unit
with Cam Locks.
Note: Arrow label indicates front of Top (A).
Slide Drawer (I) into place.
Insert Adjustable Pins into side frames
at desired level. (See Figure 5)
Place Shelf (G) into position.
Figure 5
A
Adjustable Pin
Head Cap Bolt
Cam Lock
Locking Caster
Non-Locking Caster
STEP 6
Turn unit upside down.
Attach Casters to bottom of unit with
Locking Casters at front.
(See Figure 4)
Figure 4
G
H
H
I
Arrow label at front

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319