Home Styles 88 5560 30 User manual

Key Wrench
1 pc.
Cover
1 pc.
M8x40
Bolt
4 pcs. (+1 extra)
Flat Washer
12 pcs. (+1 extra)
Spring Washer
12 pcs. (+1 extra)
M8
Nut
12 pcs. (+1 extra)
Nut Cap
12 pcs. (+1 extra)
Hardware List
Part List
Tool(s) required for assembly: Slotted screwdriver, Level
88 5560 30
IMPORTANT
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Dining Table
A.
Top
1 pc.
B.
Keyboard
1 pc.
D.
Shelf
2 pcs.
C.
Side Frame
4 pcs.
B.
Leg
4 pcs.

Flat Washer
Spring Washer
Nut
Nut Cap
Nut Cap
Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Key Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Legs (B) to Side Frames (C) with
Flat Washers, Spring Washers and Nuts,
tightening the nuts only half way.
(See Figures 1 and 2)
Flat Washer
Spring Washer
Nut
Bolt STEP 2
Place Top (A) upside down on a soft cloth.
Insert Bolts into the pre-drilled holes of Top (A).
(See Figure 3)
Attach unit to Top (A) with Flat Washers,
Spring Washers and Nuts, tightening
the nuts only half way.
Tighten all Nuts used in Steps 1
and 2, then cover all Nuts with Nut Caps.
Figure 1 Figure 2
B
B
B
B
C
C
C
C
Figure 3

Assembly Instructions 3/3
Cover
STEP 3
Turn the unit over to its’ upright position.
Cover the umbrella hole with Cover.
To level the unit, adjust the adjustable levelers on the bottom of the legs.
(See Figure 4)
Figure 4

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319