Home Styles 6654-83 User manual

Part List
6654-83
Chaise
E.
Support
1 pc.
G.
Wheel
2 pcs.
F.
Leg
2 pcs.
IMPORTANT
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
A.
Seat
1 pc.
B.
Arm
1 pc.
C.
Arm
1 pc.
D.
Back
1 pc.
H.
Axle
1 pc.
Hardware List
Small Hex Wrench
1 pc.
M8x45
Head Cap Bolt (long)
2 pcs. (+1 extra)
Flat Washer
16 pcs. (+1 extra)
Plastic Washer
4 pcs. (+1 extra)
Spring Washer
16 pcs. (+1 extra)
M8x35
Head Cap Bolt (middle)
4 pcs. (+1 extra)
M8x20
Head Cap Bolt (short)
8 pcs. (+1 extra)
M8x25
Head Cap Bolt
2 pcs. (+1 extra)
M6x10
Short Bolt
2 pcs. (+1 extra)
Hex Wrench
1 pc.
Cap
2 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Legs (F) to Seat (A) with Head Cap Bolts (short), Spring Washers and Flat Washers.
(See Figure 1)
Head Cap Bolt (short)
Spring Washer
Flat Washer
F
F
A
Figure 1

Assembly Instructions 3/6
STEP 2
Attach Arms (B) and (C) to unit with Head Cap Bolts (middle), Spring Washers and Flat Washers,
tightening Head Cap Bolts only halfway. (See Figure 2)
Figure 2
Flat Washer
Spring Washer
Head Cap Bolt (middle)
C
B

Assembly Instructions 4/6
STEP 3
Insert Axle (H) into unit.
Orientate Wheels (G) so large hole in center of Wheels (G) is to outside of unit,
then attach Wheels (G) to unit with Head Cap Bolts (short), Spring Washers and Flat Washers,
tightening Head Cap Bolts only halfway. (See Figure 3)
Lock Axle (H) in place by inserting Short Bolts into per-drilled holes in unit, then tighten bolts.
(See Figure 4)
Head Cap Bolt (short)
Spring Washer
Flat Washer
Short Bolt
Large Hole
Figure 3
G
G
H
Figure 4
Large Hole

STEP 4
Attach Support (E) to Back (D) with Head Cap Bolts, Spring Washers, Flat Washers and
Plastic Washers, tightening Head Cap Bolts only halfway.
(See Figure 5)
Assembly Instructions 5/6
Plastic Washer
Flat Washer
Spring Washer
Head Cap Bolt
D
E
Figure 5
Plastic Washer

Assembly Instructions 6/6
STEP 5
Turn unit from Step 3 over to its upright position.
Attach Back (D) to unit with Head Cap Bolts (long), Spring Washers, Flat Washers and
Plastic Washers, tightening Head Cap Bolts only halfway. (See Figure 6)
Tighten all bolts used in Steps 2, 3, 4 and 5.
Cover center wheel holes with Caps.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 7)
Plastic Washer
Flat Washer
Spring Washer
Head Cap Bolt (long)
D
Cap
Figure 6 Figure 7
Plastic Washer

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 2 years of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460