Home Styles 6801-83 User manual

Hardware List
6801-83
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Chaise
A.
Cushion
1 pc.
F.
Front
1 pc.
G.
Frame
1 pc.
H.
Back
1 pc.
B.
Seat
1 pc.
C.
Side
1 pc.
E.
Foot
4 pcs.
D.
Side
1 pc.
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
26 pcs. (+1 extra)
M6x35
Head Cap Bolt
26 pcs. (+1 extra)
Flat Washer
26 pcs. (+1 extra)
Part List
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Front (F), (G) and Back (H)Frame
to Side (C) with Head Cap Bolts, Spring Washers
and Flat Washers, tightening bolts only halfway.
(See Figure 1)
STEP 2
Attach withSeat (B) to unit
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Flat Washer
Figure 1
C
F
G
H
Head Cap Bolt
Spring Washer
Flat Washer
B

Assembly Instructions 3/4
STEP 3
Attach Side (D) to unit with Head Cap Bolts,
Spring Washers and Flat Washers into unit,
tightening bolts only halfway.
Tighten all bolts used in Steps 1, 2 and 3.
Head Cap Bolt
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt
STEP 4
Attach Feet (E) to unit with Head Cap Bolts,
Spring Washers and Flat Washers.
(See Figure 2)Figure 2
E
E
E
E
D

Assembly Instructions /44
STEP 5
Turn unit over to its upright position.
Attach Cushion (A) to unit by pushing toggles through weaving in seat of unit.
(See Figure 3)
Cushion (A) to unit with tie-downs.Attach
(See Figure 4)
Attach Cushion (A) to unit with velcro straps.
(See Figure 5)
Level unit by adjusting the adjustable levelers on bottom of unit.
(See Figure 6) Figure 6
Toggle
Tie-Down
Velcro Strap
A
Figure 3
Toggle
Figure 4
Velcro Strap
Figure 5
aaaa
aaaa

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 1 year of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460