Home Styles Tiki Bar 88 5662 98 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
88 5662 98
Tiki Bar
Roof
1 Pc.
B.
Stretcher
2 Pcs.
C.
Rack
1 Pc.
F.
Shelf
1 Pc.
G.
Shelf
4 Pcs.
H.
Base
1 Pc.
L.
Post
2 Pcs.
M.
Post
2 Pcs.
N.
Middle Panel
1 Pc.
O.
Back Panel
1 Pc.
P.
Back Panel
1 Pc.
Q.
Back Panel
1 Pc.
D.
Post
2 Pcs.
A. E.
Top
1 Pc.
J.
Side Panel
1 Pc.
K.
Side Panel
1 Pc.
I.
Apron Base
1 Pc. R.
Leg
4 Pcs.
S.
Connector
6 Pcs.
Hardware List
M6x50
Head Cap Bolt
2 Pcs. (+1 extra)
M8x25
Wood Screw (short)
8 Pcs. (+1 extra)
M7x40
Head Cap Screw
19 Pcs. (+1 extra)
M8x32
Wood Screw (middle)
28 Pcs. (+1 extra)
M8x38
Wood Screw (long)
12 Pcs. (+1 extra)
Adjustable Pin
16 Pcs. (+1 extra)
Flat Washer
2 Pcs. (+1 extra)
Nut (short)
2 Pcs. (+1 extra)
Nut (long)
4 Pcs. (+1 extra)
Bolt
4 Pcs. (+1 extra)
Wing Washer
4 Pcs. (+1 extra)
M4
Hex Wrench
1 Pc
M4
Small Hex Wrench
1 Pc
M8
Wrench
1 Pc
M6
Wrench
1 Pc
M6x16
Wood Screw (small)
2Pcs. (+1 extra)
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the Screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly item must be level to work properly. Use the included adjustable levelers to level.
/5
STEP 1
Place Top (E) upside down on a soft cloth.
Attach Connectors (S) to Top (E) with
Wood Screws (long).
STEP 3
Attach Back Panel (O) to
Side Panel (J) unit with Bolts,
Wing Washers and Nuts (long).
(See Figure 1)
Attach Back Panels (P) and then (Q)
Figure 1
STEP 2
Attach Side Panels (J) and (K) to
Posts (L) and (M) with
Wood Screws (middle).
to unit with Wood Screws (small).
(See Figure 2)
E
S
S
S
S
J
O
P
Q
Bolt
Wing Washer
Nut (long)
J
K
L
M
L
M
Wood Screw (long)
Wood Screw (middle)
Figure 2
Wood Screw (small)
M6 Wrench

Assembly Instructions 3/5
STEP 4
Attach Connectors (S) to unit with
Wood Screws (middle).
Attach Shelf (F) to unit.
STEP 6
Attach Legs (R) to Base (H)
with Head Cap Screws.
Attach Apron Base (I) to unit with
Wood Screws (middle).
STEP 5
Attach Side Panel (K) unit to unit with Bolts,
Wing Washers and Nuts (long).
Attach Middle Panel (N) to unit.
STEP 7
Attach Base (H) unit to unit with
Head Cap Screws.
H
Bolt
Wing Washer
Nut (long)
N
K
H
R
R
R
I
R
Hex Wrench
Head Cap Screw
Wood Screw (middle)
Head Cap Screw
Hex Wrench
S
S
F
Wood Screw (middle)

STEP 8
Turn unit to its’ upright position.
Attach Top (E) to unit with
Wood Screws (middle) and
Wood Screws (long).
Insert Adjustable Pins into side panels
and middle panel at the desired level.
Place Shelves (G) into position.
E
G
G
G
G
Wood Screw
(middle)
Wood Screw
(long)
Adjustable Pin
STEP 9
Attach Posts (D) to Rack (C) with Head Cap Screws.
Attach Stretchers (B) to unit with Flat Washers and Nuts (short).
(See Figure 3)
Figure 3
D
D
C
B
Flat Washer
Nut (short)
Assembly Instructions 4/5
Hex Wrench
Head Cap Screw
M8 Wrench
B

Assembly Instructions 5/5
STEP 10
Attach Roof (A) to roof unit with
Wood Screws (short).
A
STEP 11
Slide roof unit posts through the base
unit top and attach with Head Cap Screws
and Head Cap Bolts.
(See Figure 4)
Level the unit by adjusting the adjustable
levelers on the bottom of the legs.
(See Figure 5)
Figure 5
Wood Screw (short)
Head Cap
Screw
Head Cap
Bolt
Figure 4