Home H+ User manual

HEAT SYSTEM
GUIDE & USER MANUAL
HEATER CONTROLLER H+ |REMOTE CONTROLER H+R
HEATER
CONTROLLER
–
VERTICAL
+
REMOTE
CONTROLLER
IH+UK1712

Watch video instruction for heater controller at:
www.homeplus-system.com
SAFETY:
1. The heater should be installed by a qualied person.
2.Bathroom radiators tted with electric heaters should be xed not less than
60cmfromabath,showerorwashbasin,andneveraboveabath.
3.Fortheheaterpermanentlyconnected(hardwire)theremustbeappliedacut-off
devicefromthemains.Suchadevicemustdisconnecttheheaterfromthesup-
plymainsin2poles,withcontactseparationofatleast3mm.
4.Thisappliancecanbeusedbychildrenagedfrom8yearsandaboveandpersons
withreducedphysical,sensoryormentalcapabilitiesorlackofexperienceand
knowledgeiftheyhavebeengivensupervisionorinstructionconcerninguseof
theapplianceinasafewayandunderstandthehazardsinvolved
5.Childrenshallnotplaywiththeappliance.Cleaningandusermaintenanceshall
notbemadebychildrenwithoutsupervision.
6. The heater MUST BE DISCONNECTED before cleaning the casing.
AVOID SOAKING THE CASING.
7.Oneradiatorvalvemustalwaysbeopenwhenaheaterisinuse(liquidthermal
expansion).
CAUTION:Toavoidtheriskofreorelectricshocktheheatershouldbeprotectedfromwatersprayorooding.Thisapplianceisnot
intendedforusebypersons(includingchildren)oflimitedphysical,sensoryormentalabilities,orpersonsinexperiencedornotfamiliar
withthe appliance,unlesssupervisedorinstructedonthe applianceusebypersons responsible fortheir safety.Particularattention
shouldbepaidtochildren,toprecludeplayingwiththeappliancebythem.
Exclamationmarkontriangulareldsignals:information important for the user.
CAUTION: electric shock hazard!,lightningmarkendedwitharrowontriangulareld
CAUTION:inordertoreduceelectricshockhazard,donotremovethecasing(noritsrearcover).Therearenouser-serviceableparts
insidetheappliance;theproductmustbereturnedtothemanufacturerforrepairviathedistributorwhosoldtheproduct.
GUARANTEE TERMS:
Guaranteeisgrantedbymanufacturerfor24monthsperiodstartingfromdateofsale,butnolongerthan36monthsfromdateoftheheat-
ermanufacture.Defectsrevealedwithinthisperiod,resultingfromafaultofmanufacturerwillberepairedfreeofchargeortheitemre-
placedwithnew,equivalentone.Termofcomplaints’investigationupto14(fourteen)daysfromdateofsubmissiontothemanufacturer.
Guarantee does not cover:
1. Usingofproductinamannernoncompliantwithattachedinstructions.
2. Anyvisibledamagetotheheatingelementorcontrollerduetoimproperuse.
Damagingofmanufacturer’ssealsmakestheguaranteenullandvoid.
In the event that Heatpol are unable to repair or replace this product we reserve the right to refund the purchase price as an alternative.
GUARANTEE CARD
Serial No.:
Date of sale:
Stamp of retail outlet, signature of seller
Caution: Theguaranteecardshouldbelegiblylledinretailoutlet.Anycorrectionsontheguaranteecardwillinvalidate
theguarantee.Guaranteecardvalidonlywithproofofpurchase.
Mników 322, 32-084 Morawica, Poland
Tel/fax: +48 12 656 44 91

Kit content
USER MANUAL: Heating element + Heater controller (vertical) H+
Mounting in radiators
Instllationoptions:CHsystem
Installationoptions:
electricradiator
Instllationdetails
S24 S24
230 V
1 2
Heating
element
Heater
controller
Allen
key
O/Dshaped
colorcover
Wallmount
plasticcover
+
_
System option:
>60cm>60cm
Remotecontroller
Wallclip

5
4
3-5cm
6A 7
Finishing
?
?
?
8
3
Electricradiators
CHsystem
6B
S22
Cut to length
S22
Element (D) mustbecut
thecorrectlenght
230 V
Connection with a coiled
cable and a plug
9A 9B
For the heater
permanently connected
(hard wire) there must be
applied a cut-off device
from the mains. Such a
device must disconnect
the heater from the
supply mains in 2 poles,
with 9 contact separation
of at least 3 mm
Hard wire connection
10 After electric connection please
turn the switch ON
How to
Hard Wire
Live
Earth
Neutral
230 V
CAUTION! Do not disconnect
heater controller when
the system is powered.
ON/OFF
switch

Max heating temperature, selection for 1/2/3 hours
Off selection
TURBOmodeactivation
3
sec
USER MANUAL: Howtouse heater controller(optionalremotecontroller)
VIDEOavailableatwww.homeplus-system.com
Heater
controller
display
LED (Activity)
–
+
Heatercontroller Remotecontroller
Heatercontroller
Remotecontroller
Pairing button
for allen key (F)
Back
Magnet clip Wall clip mounting
Push for pairing button using
allen key to activate the controller
Locate suitable place
to mount the clip
Run the controller
Hold upper button
for 3 seconds
Switch off the controller
Hold lower button
for 5 seconds
40˚C
Standard heating
temperature
3
sec
5
sec
1
10˚C - 65˚C*
Select temperature
+
–
+
–
TURBO mode activation - max heating temperature
Hold button for 3 seconds
2
3
LED activity: heating element is working
Turn ON the controller
ON/OFF
* maximum temperature can be different
according to the producer settings

DO NOT DISCONNECT!
controllerfromheatingelement,whenconnectedtothepowersupply
Settingswaterorambienttemperature
Lack of water (or wrong choice of heat-
ing element to the heater)
Damaged heating element
(or no power cuircit)
No communication to the remote
controller if paired
Errors
Pairing nished!
Remote controller
is already working
Allen key
included
1x
1x
Press once
upper and lower
button together
Press twice
upper and lower button
together
Temperature selection.
Water temperature
Ambient temperature
2x
2x
+
–
This function is available
if heater controller is paired
with remote controller
Hold 3 sec.
Start countdown
3
sec
During countdown
within 30 seconds
Reverse remote controller.
Push pairing button!
Prepare remote controller + allen key for use
Heater controller and remote controller pairing
IfyouboughtaremotecontrollertogetherwithH+heateryou do not need to pair it!

Remotecontroller
Remotecontroller
USER MANUAL: Howtouseremote controller(tocontroltheheatercontroller)
Heater
controller
display
LED (Activity)
–
+
Heatercontroller Turn ON the controller
ON/OFF
Heatercontroller
During countdown
within 30 seconds
Reverse remote controller.
Push pairing button!
1x
1x
Hold 3 sec.
Start countdown
3
sec
Press once
upper and lower
button together
Pairing nished!
Remote controller
is already working
Allen key
included
Prepare remote controller + allen key for use
Pairing button
for allen key (F)
Back
Magnet clip Wall clip mounting
Push for pairing button using
allen key to activate the controller
Locate suitable place
to mount the clip
START:Heatercontrollerandremotecontrollerpairing
IfyouboughtaremotecontrollertogetherwithH+heateryou do not need to pair it!
1

Max heating temperature, selection for 1/2/3 hours
Off selection
TURBOmodeactivation
3
sec
+
–
TURBO mode activation - max heating temperature
Hold button for 3 seconds
4
Press twice
upper and lower
button together
2x
2x
Run the heater controller
via remote controller
Hold upper button
for 3 seconds
Switch off the controller
via remote controller
Hold lower button
for 5 seconds
40˚C
Standard heating
temperature
3
sec
5
sec
2
10˚C - 65˚C*
Select temperature
+
–
3
Temperature selection.
Water temperature 10- 65˚C*
Ambient temperature 10 -30˚C
+
–
Settingswaterorambienttemperature
The remote is
a temperature sensor
* maximum temperature can be different
according to the producer settings
This manual suits for next models
1
Table of contents
Other Home Heater manuals
Popular Heater manuals by other brands

Convair
Convair CTH04 Owner's instruction manual

Clarke
Clarke 6933980 Operation & maintenance instructions

Desa
Desa Reddy Heater R 15 E UK owner's manual

ElectrIQ
ElectrIQ EQODETALL user manual

Steinbach
Steinbach Speedheat Waterpower 3600 user manual

Sentiotec
Sentiotec 145 Instructions for installation and use