Homebase EDIT OMARI User manual

INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before
using the product and retain for future use.
HHGL Limited, MK9 1BA;
HHGL (ROI) Limited,D02 X576
OMARI
CORNER SET

SAFETY & CARE ADVICE
Please read these instructions fully before starting assembly.
·This product is made from toughened glass, which is strong but not unbreakable. In the
unlikely event that the glass fails, it will break into a large numbers of small fragments that
may be spread over a wide area. This is a feature of toughened glass, and is designed to
remove the risk of injury from glass breaking into large shards.
·If the glass is chipped or broken, stop using the product.
·Tables should not be dragged at any time.
·Do not strike or place heavy weight on the table.
·Do not place hot items directly onto the glass.
·Avoid dropping objects on the glass, as this may weaken or shatter it.
·Do not use the glass as a chopping surface.
·Do not strike the glass with hard or pointed items.
·Check you have all the components and tools listed in this booklet before assembly.
·Remove all fittings from the blister pack and separate them into their groups.
·Keep children and animals away from the work area; small parts could choke if swallowed.
·Make sure you have enough space to lay out the parts before starting.
·Do not stand or put weight on the component parts during assembly, as this could cause damage.
·Assemble on a soft, level surface to avoid damaging the unit or your floor.
·We recommend a two-person assembly.
·Dispose of all packaging carefully and responsibly.
IMPORTANT INFORMATION
·Regularly check all the bolts, screws and fastenings are secure.
·Only clean using a damp cloth and mild detergent; do not use bleach or abrasive cleaners.

COMPONENTS-PARTS
Please check you have all fittings listed below. If you have any missing or damaged fittings,
please contact your local store.
Note: The quantities below are the correct amount to complete the assembly. In some cases,
more fittings maybe supplied than required.
PART 1 - SOFA
Please check you have all components listed below. If you have any missing or
damaged components, please contact your local store.
COMPONENTS - FITTINGS
1
Long sofa seat frame x 1
2
Long sofa back frame x 1
3
Short sofa seat frame x 1
4
Short sofa back frame x 1
Allen key x 1
Wrench x 1
C
Screws M6 x 16mm x 2
B
Screws M6 x 65mm x 2
A
Screws M6 x 40mm x 7
5
Short sofa seat cushion x 1
6
Long sofa seat cushion x 1
7
Short sofa back cushion x 2
8
Short sofa back cushion x 1
D
Washers x 11
G
Cap x 11
F
Nut covers x 2
E
Nuts x 2
H
Washer plate x 1

ASSEMBLY INSTRUCTIONS
Step 1
Attach long sofa seat frame (1) to the long sofa back frame (2), using screw (A) and washer (D).
Cover all screw heads with cap (G).
Step 2
Attach short sofa seat frame (3) to the short sofa back frame (4), using screw (A) and washer (D).
Cover all screw heads with cap (G).
Step 3
Attach short sofa frame to the long sofa frame, using screw (B), washer (D) and nut (E).
G
G
A
D
A
D
1
2
A
D
A
D
4
3
G
G
B
E
D

Step 4
Using screw (C), washer (D) and
washer plate (H) to fix the sofa back frame.
C
D
H
Step 5
Cover the screw heads with the Cap (G)
in the frame, and then using the nut cap (F)
to cover the nut on seat frame.
Step 6
Position the seat cushion (5) (6) and back cushion (7) (8), as indicated on the diagram.
The sofa is now ready to use.
G
G
F
7 8
5
6

COMPONENTS - PARTS
PART 2 - TABLE
Please check you have all components listed below. If you have any missing or
damaged components, please contact your local store.
COMPONENTS - FITTINGS
9
Table top frame x 1
10
Leg frame x 4
11
Glass top x 1
Allen key x 1C1
Cap x 12
B1
Washers x 12
A1
Screws M6 x 12mm x 12
Please check you have all fittings listed below. If you have any missing or damaged fittings,
please contact your local store.
Note: The quantities below are the correct amount to complete the assembly. In some cases,
more fittings maybe supplied than required.

ASSEMBLY INSTRUCTIONS
Step 1
Attach leg frame (10) to the table top frame (9),
using screw (A1) and washer (B1).
10
9
A1
B1
Step 2
Cover all screw heads with cap (C1).
C1
Step 3
Turn the table frame the correct way up,
taking care not to pivot on the table legs.
Carefully place the glass top (11) on the table
top frame (9) to complete the assembly.
The glass table is now ready to use.
11

COMPONENTS - PARTS
PART 3 - OTTOMAN
Please check you have all components listed below. If you have any missing or
damaged components, please contact your local store.
12
Ottoman frame x 1
13
Ottoman cushion x 1
ASSEMBLY INSTRUCTIONS
Step 1
Position the cushion (13) as indicated on the diagram.
The ottoman is now ready to use.
POSITION PART 1, PART 2 AND PART 3 TOGETHER AND NOW THE SOFA SET IS READY TO USE.
13
12
ASSEMBLY COMPLETE