Homebase SPIRIT HARTINGTON User manual

Powder-coated aluminium frame
Important
Please read these instructions before using the product and retain for future use.
HHGL Limited, MK9 1BA HHGL (ROI) Limited, D02 X576
HARTINGTON
Corner Sofa Set
SPIRIT COLLECTION
FSC teak table top
2-Seater sofa - H64 x W159.5 x D79.5cm
Corner section - H64 x W79.5 x D79.5cm
Table - H34 x L79.5 x W79.5cm

2
SAFETY & CARE ADVICE
IMPORTANT INFORMATION
Please read these instructions fully before starting assembly.
• Check you have all the components and tools listed in this booklet before assembly.
• Remove all fittings from their plastic bags and separate them into their groups.
• Keep children and animals away from the work area; small parts could choke if swallowed.
• Make sure you have enough space to lay out the parts before starting.
• Do not stand or put weight on the component parts during assembly, as this could cause damage.
• Assemble on a soft, level surface to avoid damaging the unit or your floor.
• We recommend a two-person assembly.
• Dispose of all packaging carefully and responsibly.
• Do not tighten screws completely at every stage until assembling is completed.
• Regularly check all the bolts, screws and fastenings are secure.
• Only clean using a damp cloth and mild detergent; do not use bleach or abrasive cleaners.

R u le r - U s e th is ru le r to h e lp corre ctly ide n tify the s cre ws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
3
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
1 x Allen key
Tools included
Please check you have all components
listed below. If you have any missing or
damaged components, please contact
your local store.
COMPONENTS - PANELS
A
2 x Backrests
B
1 x Seat
C
1 x Middle leg
G
D
8 x M6*40mm
bolts
E
2 x M6*20mm
bolts
F
10 x Flat washers

ASSEMBLY INSTRUCTIONS - Left Sofa
Step 1
Turn the sofa (B) upside down on a soft clean surface, attach middle leg (C)to the seating tube with bolts (E) and flat washers (F)
using Allen key (G).
Step 2
Turn the sofa over and place in desired position. Attach 2 backrest panels (A) to sofa (B)with bolts (D) and flat washers
(F), tighten all screws completely using Allen key (G).
ASSEMBLY COMPLETE
E
F
C
F
D
A
B
DF

R u le r - U s e th is ru le r to he lp co rre ctly ide n tify th e s cre ws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
Please check you have all components
listed below. If you have any missing or
damaged components, please contact
your local store.
COMPONENTS - PANELS
A
2 x Backrests
B
1 x Seat
C
1 x Middle leg
1 x Allen key
Tools included
G
D
8 x M6*40mm
bolts
E
2 x M6*20mm
bolts
F
10 x Flat washers

ASSEMBLY INSTRUCTIONS - Right Sofa
Step 1
Turn the sofa (B) upside down on a soft clean surface, attach middle leg (C)to the seating tube with bolts (E) and flat washers (F)
using Allen key (G).
Step 2
Turn the sofa over and place in desired position. Attach 2 backrest panels (A) to sofa (B)with bolts (D) and flat washers
(F), tighten all bolts completely using Allen key (G).
ASSEMBLY COMPLETE
E
F
C
F
A
D
B
FD

R u le r - U s e th is ru le r to he lp co rre ctly ide n tify th e s cre ws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
Tools included
Please check you have all components
listed below. If you have any missing or
damaged components, please contact
your local store.
COMPONENTS - PANELS
A
2 x Backrests
B
1 x Seat C D
8PCS
M6*40mm bolts
8PCS
Flat washers
1 x Allen key E

ASSEMBLY INSTRUCTIONS - Corner Seat
Step 1
Attach one backrest panel (A)to the seating section of the chair (B)with bolts (C) and flat washers (D) using Allen key (E).
Step 2
Attach another piece of backrest panel (A) to the seating section of the chair (B)with bolts (C) and flat washers (D),
tighten all bolts completely using Allen key (E).
ASSEMBLY COMPLETE
CD
A
BCD
CD
A
BCD

R u le r - U s e th is ru le r to he lp co rre ctly ide n tify th e s cre ws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
3
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
Tools included
Please check you have all components
listed below. If you have any missing or
damaged components, please contact
your local store.
COMPONENTS - PANELS
A
1 x table top
B
4 x legs CD
4PCS
M8*35mm bolts
4PCS
Spanner 1
E
Flat washers

ASSEMBLY INSTRUCTIONS - Table
Step 1
Turn table top (A) upside down on a soft clean surface, attach 4 legs (B)to the table top with bolts (C) and flat washers (D)using
spanner (E).
Step 2
Turn the table over and place in desired position.
ASSEMBLY COMPLETE
CD
CD
A
B

R u le r - U s e th is ru le r to he lp co rre ctly ide n tify th e s cre ws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
Please check you have all components
listed below. If you have any missing or
damaged components, please contact
your local store.
COMPONENTS - PANELS
A
1 x RH sofa
B
1 x LH sofa
C
1 x corner D
4 x brackets

ASSEMBLY INSTRUCTIONS
Step 1
Position part (A), part (B)and part (C)ready for assembly. With brackets (D), position over the adjoining section parts.
ASSEMBLY COMPLETE
A
B
C
D