Page T-3
15 May 2017
SYSTEM INSTALLATION MANUAL
KTR 2280A
© Honeywell International Inc. Do not copy without express permission of Honeywell.
may not design or manufacture a Honeywell part or detail of a Honeywell part, to create a repair for a Honeywell
part, design or manufacture any part that is similar or identical to a Honeywell part, compare a Honeywell part
or design of a Honeywell part to another part design, or apply for FAA PMA or other domestic or foreign
governmental approval to manufacture or repair a Honeywell part.
3. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are not
expresslygrantedto you, includingallrightsinpatents,copyrights,trademarks,and tradesecrets.The Materials
arelicensedandnotsoldunderthis LicenseAgreement.NolicensetouseanyHoneywelltrademarksorpatents
is granted under this License Agreement.
4. Changes - Honeywell reserves the right to change the terms and conditions of this LicenseAgreement at any
time, including the right to change or impose charges for continued use of the Materials. Honeywell may add,
deleteor otherwisemodifyany portionoftheMaterials(“UpdatedMaterials”)at anytime.Youagreeto stopusing
outdated Materials upon issuance of any Updated Materials.
5. Confidentiality - You acknowledge that these Materials contain information that is confidential and proprietary
to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of these Materials.
6. Assignment And Transfer - This License Agreement may be assigned to a service center approved and
formally designated as a service center by Honeywell, provided, however, that you retain no copies of the
Materials in whole or in part. However, the recipient of any such assignment or transfer must assume all of your
obligations and liabilities under this LicenseAgreement. No assignment or transfer shall relieve any party of any
obligationthatsuchpartythenhashereunder.Otherwise,neitherthisLicenseAgreementnoranyrights,licenses
orprivilegesgrantedunderthisLicenseAgreement,noranyofitsdutiesorobligationshereunder,noranyinterest
or proceeds in and to the Materials shall be assignable or transferable (in insolvency proceedings, by merger,
by operation of law, by purchase, by change of control or otherwise) by you without Honeywell’s written consent.
7.Copies of Materials - Unless you have the express written permission of Honeywell, you may not make or
permitmakingofcopies,digitalorprinted,oftheMaterials.YouagreetoreturntheMaterialsandanysuchcopies
thereof to Honeywell upon the request of Honeywell.
8.Term - This LicenseAgreement is effective until terminated as set forth herein. This License Agreement will
terminate immediately, without notice from Honeywell, if you fail to comply with any provision of this License
Agreement or will terminate simultaneously with the termination or expiration of your applicable agreement with
Honeywell relating to the repair or maintenance of the subject Honeywell Product. Upon termination of this
LicenseAgreement, youwill return these MaterialstoHoneywell withoutretainingany copies, in whole orin part,
and will have one of your authorized officers certify that all Materials have been returned with no copies retained.
10. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting from a
breach of this License Agreement.
11. Limitation of Liability - Honeywell makes no representations or warranties regarding the use or sufficiency of
theMaterials.THEREARE NOOTHERWARRANTIES, WHETHERWRITTENOR ORAL,EXPRESS,IMPLIED
OR STATUTORY, INCLUDING, BUT NOT LIMITED TO (i) WARRANTIES ARISING FROM COURSE OF
PERFORMANCE, DEALING, USAGE, OR TRADE, WHICHARE HEREBY EXPRESSLY DISCLAIMED, OR (ii)
WARRANTIES AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF THIRD PARTIES,
EVEN IF HONEYWELL HAS BEENADVISED OF ANY SUCH INFRINGEMENT. IN NO EVENT WILL
HONEYWELL BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL
DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF
INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT PERMITTED BYAPPLICABLE
LAW, THESE LIMITATIONS AND EXCLUSIONS WILLAPPLY REGARDLESS OF WHETHER LIABILITY
ARISES FROM BREACH OF CONTRACT, WARRANTY, INDEMNITY, TORT (INCLUDING BUT NOT LIMITED
TO NEGLIGENCE), BY OPERATION OF LAW, OR OTHERWISE.
12.Controlling Law - This License Agreement shall be governed and construed in accordance with the laws of
the State of New York without regard to the conflict of laws provisions thereof.
