Honeywell IS216 Installation and operation manual

The IS216 family of PIR motion sensors offer quality detection in an attractive white housing that blends with any décor.
The IS216 is flexible and simple to install for basic security applications—mounting easily on walls or in corners. The
IS216T contains the same great features as well as a case tamper.
•UV Tolerant Lens
Can withstand high UV environments
with minimal degradation
•Temperature Compensation
Advanced Dual Slope
•Microprocessor Controlled
Digital processing for improved
detection and false alarm protection
•S ock Algorit m
Reduces false alarms
•Tamper Proof Design
Alarm relay cannot be compromised
with a magnet
•Installer Friendly Settings
DIP switches are easier to program
and can not be lost unlike jumpers
•Improved EMI Immunity
Surface mount design reduces false
activation due to RF interference
•Attractive Sleek Design
The stylish white housing is designed
to blend with any room décor
•Surfaced Run Wiring
A large wiring channel allows for
quick, neat installations
•Look-down Zones
Honeywell patented look-down mirror
provides for optimum detection
pattern directly beneath the sensor
•Mounting Flexibility
The unit easily mounts on walls
or in corners for a full range of
coverage. With subtle corner
mounting knockouts, the IS216
maintains its streamlined aesthetics
no matter where it is placed
•Sabotage-resistant Lens Design
The lens wraps around a retainer,
making it more stable and difficult
to sabotage
•Selectable Sensitivity
Sensitivity can be adjusted to match
installation requirements
•Tamper Switc (IS216T only)
The sealed tamper switch signals
before any enclosure access
is possible
•W ite Lig t Immunity
A white light absorbing, black bug
guard dramatically increases white
light immunity to greater than 6500
Lux, reducing false activations
•Black Bug Guard
Prevents insects from entering the
sensor optics, reducing the chance
of false activation
•Applications
Designed for residential and light
commercial applications
•Silent Relay
Can be used in quiet environments
•Automatic Walk Test
Saves time on installation
FEATURES
IS216/IS216T
PASSIVE INFRARED MOTION SENSOR

• Detection Met od:
- Dual element passive infrared
• Coverage:
- 40' X 40' (12m x12m),
90º wide angle
• Detection Zones:
- 44 long range, 14 intermediate,
8 lower, 4 look-down
• PIR Sensitivity:
- DIP switch selectable -
Low (3-5 Steps PC2)
and High (1-3 Steps PC1)
• LED Enable:
- Can be enabled/disabled by
Autowalk DIP switch
• Mounting Heig t:
- 7' 6" to 9' (2.3m to 2.7m)
• Power Requirements:
- 8.5 – 15.4VDC
- 16mA @ 12VDC
• Alarm Relay:
- Form A (SPST)\30mA @ 24VDC
MAX 40 Ohm protective resistor
• Tamper Switc :
- 24VDC, 30mA
• Temperature Compensation:
- Advanced Dual Slope
• Operating Temperature:
- 14º F – 131º F (-10º C to +55º C)
• Relative Humidity:
- 5% – 95% non condensing
• RF Immunity:
- 30V/m from 10-1000 MHz.
• W ite Lig t Immunity:
- >6500 Lux
• Weig t:
- -66.62g (2.35 oz)
- Packaged Product 92.14 g
(3.25 oz)
• Dimensions:
- 3 3/8" H X 2 3/8" W x 1 1/2" D
(max protrusion)
(86mm x 60mm x 38mm)
• Agency Listing:
- FCC
- IC
- EN50131-1 and TS 50131-2-2
Security Grade 2, Environmental
Class II
- Ctick
- CE
- UL639 listed
- cUL listed to ULCS306-03
ORDERING
IS216 Passive Infrared Motion Sensor
IS216T Passive Infrared Motion Sensor with Tamper
ACCESSORIES
0-000-110-01 SMB-10: Universal White Swivel Mount Bracket (5 Pack)
0-000-155-01 SMB-10T: Tampered Universal White Swivel Mount Bracket (5 Pack)
0-000-111-01 SMB-10C: Universal White Ceiling Mount Bracket (5 Pack)
IS216/IS216T
PASSIVE INFRARED MOTION SENSOR
SPECIFICATIONS
L/IS216D/D
September 2009
2009 Honeywell International Inc.
Automation and Control Solutions
Honeywell Security & Communications
2 Corporate Center Dr. Suite 100
P.O. Box 9040
Melville, NY 11747
1.800.467.5875
www.honeywell.com
TOP VIEW
Wide Angle Lens
DETECTION PATTERNS
SIDE VIEW
Wide Angle Lens
For more information:
www.honeywell.com/security/hsc