Hoover HV-C60CI User manual

INDUCTION
OFFOFFOFF OFF
Welcome to your new Hoover cooktop! We hope that this product brings you many years of enjoyment.
IMPORTANT! This cooktop must be professionally installed to an appropriately earthed wiring system by
a licensed electrician, following the instructions in the supplied instruction manual. Alternatively, you can
install it yourself into an established, standard 10 amp household wall socket.
Please ensure you make the manual available to the electrician, if you chose to hardwire this appliance.
Do not try to hardwire the cooktop yourself! Doing so will expose you to danger and could invalidate any
warranty or liability claims.
Consult the full instruction manual for comprehensive installation, usage and cleaning instructions and
important safety advice. This guide only contains basic usage instructions.
IMPORTANT! Induction cooktop-compatible cookware must have a base made of material that attracts a
magnet. Only use cookware with a base suitable for induction cooking. Look for the induction symbol on
the packaging or on the bottom of the pan (see pages 18-19 of the instruction manual for more information
on suitable cookware).
Let’s get your cooktop
up and running!
Version #:
After Sales Support
Model #:
V1.0
1300 886 649
HV-C60CI
60 cm Induction Cooktop
Hoover’s quick
& snappy start
up guide.
First Use
• Place a saucepan filled half full with cold water on one
cooking zone.
• Switch on that cooking zone and let it heat up for 5
minutes at the maximum setting to burn off any “new
smell” or humidity that may have formed on the hob.
• Repeat this for each zone, one at a time.
NOTE: Any odour or smoke on first use can be
disregarded safely. It will disappear with repeated use.
Ensure good ventilation.
Power Power
indicator
Heat zone
indicators
Front left
control knob
Front right
control knob
Back left
control knob
Back right
control knob
Control Panel
INDUCTION
OFFOFF
OFF
OFF
1A 1B
2
60 cm Touch Control
Induction Cooktop
HV-C60CI

Hope you enjoy your new Hoover
induction cooktop!
Using the Cooktop
• Touch the power button to switch on the cooktop (Fig. 3a).
• Place a suitable pan on the cooking zone you want to use
(Fig. 3b). The pan and cooking zone diameters should match.
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
• Select a heat setting (from 1-9) by turning the knob (Fig.
3c) for the cooking zone you want to use. The heat indicator
for the corresponding hob will illuminate. You must select
a heat level within one minute, otherwise the cooktop will
automatically switch off.
• NOTE: The selected heat level applies if you are only using one
hob. Because this appliance is power limited to 2.4 kW, if you
are using multiple hobs, the heat level will be affected. Please
see the table on page 22 of the instruction manual for more
information.
• When you have finished cooking, turn the cooking zone off by turning the knob back to the OFF position.
• Turn the whole cooktop off by touching the power button.
NOTE: Residual heat warning
• After a cooking zone is switched off, the indicator(s) [ ] above the residual heat symbol [
INDUCTION
OFFOFFOFF OFF
]
(Fig. 3d) indicate that the temperature of the corresponding zone is still high enough to cause injury. It
will disappear when the surface has cooled down to a safe temperature.
• The residual heat indicator can also be used as an energy saving function, for keeping food warm on a
cooking zone that is still hot.
60 cm Touch Control
Induction Cooktop
HV-C60CI
3B
INDUCTION
OFFOFF
OFF
OFF
3C
3A
INDUCTION
OFFOFFOFF OFF
3D