Horizon Hobby E-Flite F-18 Manual

F-18 Transmitter setup Table
EFL3950 and EFL3975
EFL3950, EFL3975
F-18 80mm EDF
Computerized Transmitter Setup
DX6i
1. Go to the SETUP LIST MENU
2. Set MODEL TYPE: ACRO
3. Go to ADJUST LIST MENU
4. Set TRAVEL: FLAPS 100 125
5. Set FLAPS: Norm 100 Flap Elev 0
LAND 100 Flap Elev 15
DX7S
DX8
1. Go to the SYSTEM SETUP
2. Set MODEL TYPE: AIRPLANE
3. Set WING TYPE: 1 AIL 1 FLAP
4. Go to the FUNCTION LIST
5. Set FLAP SYSTEM: Choose Flap
NORM: -100% FLAP 0% Elevator
MID: 50% FLAP 10% Elevator
LAND: 100% FLAP 15% Elevator
SPEED 2.0S: SWITCH = FLAP
DX6e
DX6 (Gen2)
DX7 (Gen2)
DX8e
DX8 (Gen2)
DX9
DX10t
DX18
DX20
iX12
1. Go to the SYSTEM SETUP (Model Utilities)†
2. Set MODEL TYPE: AIRPLANE
3. Set AIRCRAFT TYPE (Model Setup, Aircraft Type)†:
WING: 1 AIL 1 FLAP
4. Set CHANNEL ASSIGN (Model Setup, Channel Assign)†:
(Default switch assignments with a new model setup)
Gear (CH5): SWITCH A
Flap (CH6): SWITCH D
5. Go to the FUNCTION LIST (Model Adjust)†
6. Set FLAP SYSTEM:
SELECT SWITCH D:
POS 0: -100% FLAP* 0% Elevator
POS 1: 50% FLAP* 10% Elevator
POS 2: 100% FLAP* 15% Elevator
SPEED 2.0
Computergestützte Senderkonfiguration
DX6i
1. Auf SETUP LIST MENU (Konfigurationsmenü) gehen
2. MODEL TYPE (Modelltyp) einstellen: ACRO
3. Das EINSTELLUNGSMENÜ (ADJUST LIST MENU) aufrufen
4. TRAVEL [VERFAHRWEG] einstellen: FLAPS 100 125
5. BREMSKLAPPEN (FLAPS) einstellen:
Norm 100Flap [Klappe] Elev [Höhenruder] 0
LAND 100 Flap [Klappe] Elev [Höhenruder] 15
DX7S
DX8
1. Auf SYSTEM SETUP (Systemkonfiguration) gehen
2. MODEL TYPE (Modelltyp) einstellen: AIRPLANE (Flugzeug)
3. WING TYPE (TRAGFLÄCHENTYP) einrichten: 1 QUERRUDER 1
KLAPPE
4. Die FUNKTIONSLISTE (FUNCTION LIST) aufrufen
5. KLAPPENSYSTEM (FLAP SYSTEM) einstellen: Klappen
NORM auswählen: -100% KLAPPE 0% Elevator [Höhenruder]
MITTE: 50% FLAP [KLAPPE] 10% Elevator [Höhenruder]
LAND: 100% FLAP [KLAPPE] 15% Elevator [Höhenruder]
SPEED [GESCHWINDIGKEIT] 2,0 S: SCHALTER = KLAPPE
DX6e
DX6 (Gen2)
DX7 (Gen2)
DX8e
DX8 (Gen2)
DX9
DX10t
DX18
DX20
iX12
1. Auf SYSTEM SETUP (Systemkonfiguration) gehen (Model
Utilities [Modell-Dienstprogramme])†
2. MODEL TYPE (Modelltyp) einstellen: AIRPLANE (Flugzeug)
3. AIRCRAFT TYPE [Fluggerättyp] (Model Setup
[Modellkonfiguration], Aircraft Type [Fluggerättyp])†:
WING [Tragfläche]: 1 QUERRUDER 1 KLAPPE
4. CHANNEL ASSIGN (Model Setup [Modellkonfiguration],
Channel Assign [Kanal zuweisen])†einstellen:
(Standard-Schalterbelegungen mit einer neuen Einrichtung des
Modells)
Getriebe (Kanal 5): SCHALTER A
KLAPPE (KANAL6): SCHALTER D
5. Auf FUNCTION LIST [FUNKTIONSLISTE] (Model Adjust [Anpassen
des Modells])†gehen
6. KLAPPENSYSTEM (FLAP SYSTEM) einstellen:
SCHALTER D AUSWÄHLEN:
POS 0: -100% FLAP [KLAPPE]* 0% Elevator [Höhenruder]
POS 1: 50% FLAP [KLAPPE]* 6% Elevator [Höhenruder]
POS 2: 100% FLAP [KLAPPE]* 10% Elevator [Höhenruder]
SPEED [GESCHWINDIGKEIT] 2,0

Created 08/2019 63136EFL3950, EFL3975
© 2019 Horizon Hobby, LLC.
E-flite, and the Horizon Hobby logo are trademarks or registered trademarks
of Horizon Hobby, LLC.
All other trademarks, service marks and logos are property of their
respective owners.
http://www.HorizonHobby.com/
F-18 80mm EDF
Configuration numérisée de l’émetteur
DX6i
1. Allez au SETUP LIST MENU (MENU LISTE DES CONFIGURATIONS)
2. Définissez le MODEL TYPE (TYPE DE MODÈLE): ACRO
3. Allez au ADJUST LIST MENU (MENU LISTE DES AJUSTEMENTS)
4. Configurez TRAVEL (la course): FLAPS (VOLETS) 100125
5. Configurez les FLAPS(VOLETS): Norm 100 Flap (volet)Elev 0
LAND (atterrissage) 100 Flap (volet)Elev 15
DX7S
DX8
1. Allez au SYSTEM SETUP (CONFIGURATION DU SYSTÈME)
2. Définissez le MODEL TYPE (TYPE DE MODÈLE): AIRPLANE (AVION)
3. Définissez le WING TYPE (TYPE D’AILE): 1 AIL 1 FLAP (VOLET)
4. Allez à la FUNCTION LIST (LISTE DES FONCTIONS)
6. Configurez le FLAP SYSTEM (SYSTÈME DU VOLET): Choisissez
Flap (volet)NORM: -100% FLAP (volet) 0% Elevator
MID (milieu): 50% FLAP (volet) 10% Elevator (élévateur)
LAND (atterrissage): 100% FLAP (volet)15% Elevator Elévateur)
SPEED (VITESSE)2,0S: SWITCH (INTERRUPTEUR) = FLAP (VOLET)
DX6e
DX6
(Gen2)
DX7
(Gen2)
DX8e
DX8
(Gen2)
DX9
DX10t
DX18
DX20
iX12
1. Allez au SYSTEM SETUP (CONFIGURATION DU SYSTÈME) (Model
Utilities (équipements du modèle))†
2. Définissez le MODEL TYPE (TYPE DE MODÈLE): AIRPLANE (AVION)
3. Définissez l’AIRCRAFT TYPE (TYPE D’APPAREIL) (configuration du
modèle, type d’appareil)†:
WING (AILE): 1 AIL 1 FLAP (VOLET)
4. Définissez le CHANNEL ASSIGN (ATTRIBUTION DU CANAL)
(configuration du modèle, attribution de canal)†:
(attributions du commutateur par défaut avec une nouvelle
configuration du modèle)
Gear (CH5): SWITCH A (commutateur A)
Flap (volet, CH6): SWITCH D (commutateur D)
5. Allez à la FUNCTION LIST (LISTE DES FONCTIONS) (ajustement du
modèle)†
6. Configurez le FLAP SYSTEM (SYSTÈME DU VOLET):
SÉLECTIONNEZ LE SWITCH (COMMUTATEUR) D:
POS 0: -100% FLAP (volet) 0% Elevator (élévateur)
POS1: 50% FLAP* (volet) 6% Elevator (élévateur)
POS2: 100% FLAP* (volet) 15% Elevator (élévateur)
SPEED (VITESSE)2,0
Impostazione di una trasmittente computerizzata
DX6i
1. Andare su SETUP LIST MENU
2. Impostare MODEL TYPE: ACRO
3. Andare su ADJUST LIST MENU
4. Impostare TRAVEL: FLAPS 100 125
5. Impostare FLAPS: Norm 100 Flap Elev 0
LAND 100 Flap Elev 15
DX7S
DX8
1. Andare su SYSTEM SETUP
2. Impostare MODEL TYPE: AIRPLANE
3. Impostare WING TYPE: 1 AIL 1 FLAP
4. Andare su FUNCTION LIST
5. Impostare FLAP SYSTEM: Scegliere Flap
NORM: -100% FLAP 0% Elevatore
MID: 50% FLAP 10% Elevatore
LAND: 100% FLAP 15% Elevatore
SPEED 2.0S: SWITCH = FLAP
DX6e
DX6
(Gen2)
DX7
(Gen2)
DX8e
DX8
(Gen2)
DX9
DX10t
DX18
DX20
iX12
1. Andare in SYSTEM SETUP (Utilità modello)†
2. Impostare MODEL TYPE: AIRPLANE
3. Impostare AIRCRAFT TYPE (setup modello, tipo velivolo)†:
WING: 1 AIL 1 FLAP
4. Impostare CHANNEL ASSIGN (setup modello, assegnazione
canale)†:
(Assegnazione switch di default per setup nuovo modello)
Carrello (CH5): SWITCH A
Flap (CH6): SWITCH D
5. Andare su FUNCTION LIST (regolazione modello)†
6. Impostare FLAP SYSTEM:
SELECT SWITCH D:
POS 0: -100% FLAP* 0% Elevatore
POS 1: 50% FLAP* 6% Elevatore
POS 2: 100% FLAP* 15% Elevatore
SPEED 2.0