horsch Joker 6 HD Manual

1. Coupling the hydraulic system
ed Nov 06
DatumEn t w.DateinameZeichnungsnummerMaschine Zeichnung
Aufkleber 00110681 - 7
00110681 00110682
00110683 00110684
00110685 00110686
00110687
(double acting) Lift / lower
ed Nov 06
DatumEn t w.DateinameZeichnungsnummerMaschine Zeichnung
Aufkleber 00110681 - 7
00110681 00110682
00110683 00110684
00110685 00110686
00110687
(double acting) Folding
ed Nov 06
DatumEn t w.DateinameZeichnungsnummerMaschine Zeichnung
Aufkleber 00110681 - 7
00110681 00110682
00110683 00110684
00110685 00110686
00110687
(double acting) Undercarriage
- (single acting) Drawbar
2. Hitching-up the machine
¾Open the lock valve (b).
In case of adjustable drawbar or ball-head hitching:
¾Switch the control unit for "Lift / Lower" to 󰘱oating position.
¾"Drawbar" control unit: Adapt the height of the drawbar.
¾Hitch up the machine.
¾Switch the "drawbar" control unit to 󰘱oat position.
This is no replacement for the operating instructions!
Pay attention to the safety instructions and warnings in the operating instructions!
Keep the operating instructions on board.
Operators must have read and understood the complete operating instructions before they use the machine!
Short instructions
Operation Hydraulics - Joker 5 / 6 / 8 HD
Art.-No. 80740205
(a) Rotary spool valve for drawbar
(b) Lock valve / cylinder drawbar
(c) Undercarriage
(d) Cylinder Up/Down (Packer)
(e) Cylinder for folding
(f) Depth setting for support wheels
a
b
f
d
c
e
Lock valve

This is no replacement for the operating instructions!
Pay attention to the safety instructions and warnings in the operating instructions!
Keep the operating instructions on board.
Operators must have read and understood the complete operating instructions before they use the machine!
Short instructions
Operation Hydraulics - Joker 5 / 6 / 8 HD
Art.-No. 80740205
3. Unfolding the machine
¾Control unit "Lift/Lower": Lift up the machine.
¾Remove clips from the hydraulic cylinder on the drawbar
(b) and on the undercarriage (c).
¾Turn the rotary spool valve (a) to position “Field”.
¾Unfold the machine.
¾Control unit for "Undercarriage":
Swing the undercarriage up.
4. Use in the eld
¾Switch the "drawbar" control unit to 󰘱oat position.
¾For use in the 󰘰eld switch the control unit "Lift/Lower"
to 󰘱oating position.
5. Folding the machine
¾Control unit for "Undercarriage":
Swing the undercarriage down.
¾Fold in the machine.
¾Insert clips at the hydraulic cylinder on drawbar and
undercarriage.
¾Turn the rotary spool valve (a) to position “Road”.
¾Control unit "Lift/Lower": Lower the machine completely.
Machine lifted
Unfold and lower the machine,
undercarriage has been pivoted up
Rotary spool valve
Machine folded up and lowered
Machine lifted up, undercarriage
swivelled down
This is no replacement for the operating instructions!
Pay attention to the safety instructions and warnings in the operating instructions!
Keep the operating instructions on board.
Operators must have read and understood the complete operating instructions before they use the machine!