Howard Miller HEKMAN 24819 User manual

24819 ROUND DINING TABLE
A
SPRING W. M6
16 PCS.
B C D
FLAT W. M6
16 PCS.
Assembly Instruction
ALLEN KEY L4
(FOR ALLEN BOLT)
1 PC.
ALLEN BOLT
M6 X 40 (4 PCS.)
ALLEN BOLT
M6 X 70 (4 PCS.)
E
PART INSIDE
1 2 4
TOP PANEL (1 Pc) WOOD LEG (1 Pc) METAL LEG X (1 Pc)
5
METAL LEG Y (2 Pcs)
STEP 1.
PLACE ROUND DINING TABLE BODY
IN A SOFT, AND FLAT SURFACE.
ASSEMBLE THE METAL LEG Y (5) TO
THE HOLE IN THE RING METAL LEG X
(4) USING THE PROVIDED
ALLEN BOLT (A), SPRING WASHER (E),
FLAT WASHER (D) AND ALLEN KEY (F).
HARDWARE LIST
F
ALLEN BOLT
M6 X 30 (8 PCS.)
3
METAL STREACHER
(1 Pc)
STEP 2.
INSTALL METAL STREACHER (3) TO THE PLATE ON
THE METAL LEG X (4) AND METAL LEG Y (5) USING
THE PROVIDED ALLEN BOLT (A), SPRING WASHER (E),
FLAT WASHER (D) AND ALLEN KEY (F).
Page 1 of 2

STEP 3.
INSTALL METAL LEG X (4) AND
METAL LEG Y (5) TO THE HOLE
WHICH UNDER THE TOP PANEL (1)
USING THE PROVIDED ALLEN BOLT
(B), SPRING WASHER (E), FLAT
WASHER (D) AND ALLEN KEY (F).
STEP 4.
INSTALL WOOD LEG (2) TO THE
HOLE IN THE METAL LEG X (4) AND
METAL LEG Y (5) USING THE
PROVIDED ALLEN BOLT (C), SPRING
WASHER (E), FLAT WASHER (D) AND
ALLEN KEY (F).
TIGHTEN ALL.
Page 2 of 2