Howard Miller HEKMAN 79400P User manual

A HOWARD MILLER COMPANY
Assembly Instruction
Page 1 of 2
PART INSIDE
1 2 3
TOP ASSEMBLY (1 Pc) PEDESTALS (2 Pcs) MODESTY PANEL (1 Pc)
A B C
ALLEN KEY L5
(FOR BOLT 5
16")
1 Pc
ALLEN BOLT
5
16" x 2" (4 Pcs)
HARDWARE LIST
ALLEN BOLT
5
16" x 6" (2 Pcs)
LOCK W. M8
(6 Pcs)
D E
FLAT W. M8
(6 Pcs)
F
COVER
(4 Pcs)
4
BUN FEET
(8 Pcs)
STEP 1.
INSERT ALL THE BUN FEET (4) IN PRE-DRILLED
HOLES, SECURE BY TURNING THE BUN FOOT IN A
CLOCKWISE DIRECTION AS SHOWN.
STEP 2.
ASSEMBLY LEFT & RIGHT PEDESTALS AND MODESTY
PANEL WITH ALLEN BOLT (A), LOCK WASHER (D),
FLAT WASHER (C) BY USING ALLEN KEY (E).
COVER THE BOLTS WITH COVER CAPS (F).
79400P / 79420P PEDS & MODESTY PANEL
79400T / 79420T TOP PANEL

Page 2 of 2
STEP 3.
PLACE THE TOP ASSEMBLY ON THE PEDESTALS AS SHOWN IN THE SIDE VIEW THE TOP ASSEMBLY IS
SET A LITTLE FOWARD ON THE PEDESTALS THAN PUSHED BACK TO LOCK FRENCH CLEATS.
OPEN THE UPPER DRAWERS IN THE PEDESTALS.
SCREW THE TOP PANEL ASSEMBLY AND PEDESTALS WITH ALLEN BOLT (B), LOCK WASHER (D), FLAT
WASHER (C) USING ALLEN KEY (E).
CLOSE UPPER DRAWERS.