Howard Miller HEKMAN 8-1250 User manual

8-1250 PUB / GAME TABLE
A B C
Assembly Instruction
PART INSIDE
1 2
TOP ASSEMBLY (1 Pc) MOUNTING PLATE
(1 Pc)
HARDWARE LIST
D
ALLEN BOLT
M8 x 40 (4 PCS.)
ALLEN KEY L5
(FOR BOLT M8)
1 PC.
SPRING W. M8
(16 PCS.)
FLAT W. M8
(16 PCS.)
ALLEN BOLT
5
16 x 8" (4 PCS.)
3
PED. EXTENDER (1 Pc)
4 5
BASE ASSEMBLY
(1 Pc)
COLUMN (1 Pc)
Page 1 of 2
ASSEMBLY TO HEIGHT 30"
STEP 1.
ALIGN THE HOLES IN THE COLUMN (4) WITH THE
INSERT MOUNTING PLATE (2). CONNECT USING
FLAT WASHER (E), LOCK WASHER (F), ALLEN
BOLT (B) AND ALLEN KEY (G) PROVIDED.
STEP 2.
LAY TOP PANEL UPSIDE DOWN ON A SOFT, CLEAN
AND FLAT SURFACE.
ALIGN THE HOLES IN THE MOUNTING PLATE WITH
THE INSERT IN THE BOTTOM PANEL OF THE TOP
ASSEMBLY. CONNECT USING FLAT WASHER (E),
LOCK WASHER (F), ALLEN
BOLT (A) AND ALLEN KEY (G) PROVIDED. STEP 3.
ALIGN THE HOLES IN THE COLUMN (4) WITH THE INSERT
BASE ASSEMBLY (5). CONNECT USING FLAT WASHER (E),
LOCK WASHER (F), ALLEN BOLT (C) AND ALLEN KEY (G)
PROVIDED.
E
F
B
G
E G
E
F
G
A
E
F
G
C
F
ALLEN BOLT
5
16 x 2 1
2" (4 PCS.)
ALLEN BOLT
5
16 x 2" (4 PCS.)

Page 2 of 2
ASSEMBLY TO HEIGHT 36"
STEP 1.
ALIGN THE HOLES IN THE PED. EXTENDER (3)
AND COLUMN (4) WITH THE INSERT MOUNTING
PLATE (2). CONNECT USING FLAT WASHER (E),
LOCK WASHER (F), ALLEN BOLT (D) AND ALLEN
KEY (G) PROVIDED.
STEP 2.
LAY TOP PANEL UPSIDE DOWN ON A SOFT, CLEAN
AND FLAT SURFACE.
ALIGN THE HOLES IN THE MOUNTING PLATE WITH
THE INSERT IN THE BOTTOM PANEL OF THE TOP
ASSEMBLY. CONNECT USING FLAT WASHER (E),
LOCK WASHER (F), ALLEN
BOLT (A) AND ALLEN KEY (G) PROVIDED.
STEP 3.
ALIGN THE HOLES IN THE COLUMN (4) WITH THE INSERT
BASE ASSEMBLY (5). CONNECT USING FLAT WASHER (E),
LOCK WASHER (F), ALLEN BOLT (C) AND ALLEN KEY (G)
PROVIDED.
E
F
G
D
F
E
F
G
C
E
F
A