Howard Miller HEKMAN 24820 User manual

24820 SLAB TOP TRESTLE DINING TABLE
A
BOLT M8 x 100
2 PCS.
HEXAGON NUTS
M8 (2 PCS.)
ALLEN KEY L5
(FOR ALLEN BOLT)
1 PC.
WRENCH
(FOR HEXA BOLT)
1 PC.
BCD F
ALLEN BOLT
M8 X 40 (8 PCS)
E H
SPRING W. M8
8 PCS.
FLAT W. M8
8 PCS.
G
Page 1 of 2
HARDWARE LIST
PART INSIDE
1 2 3
TOP PANEL (1 Pc) LEAF PANEL (2 Pcs) WOODLEGS(2Pcs)
4
STREATCHER(1Pc)
Assembly Instruction
STEP 1:
INSERT CONNECTING BOLT (A) INTO INSERT IN LEG
ASSEMBLIES. PLACE STRETCHER
IN POSITION AND LOCK
WITH HALFMOON WASHER
(B), HEXAGON NUTS (C)
USING WRENCH (H)
PROVIDED.
STEP 2.
LAY TOP PANEL UPSIDE DOWN ON A SOFT, CLEAN
AND FLAT SURFACE. ALIGN THE HOLES IN THE
TOP PLATE OF THE LEG ASSEMBLIES WITH THE
INSERTS IN THE BOTTOM PANEL OF THE TOP
ASSEMBLY. CONNECT USING FLAT WASHER (E),
SPRING WASHER (F), ALLEN BOLT (D) AND ALLEN
KEY (G) PROVIDED.
A
B
C
H
G
D
F
E
HALFMOON
WASHER M8
2PCS.

Page 2 of 2
STEP 3:
TURN ASSEMBLED TABLE UPWARD.
* TO ATTACH EXTENSION LEAF, UNLOCK TABLE LOCKS UNDER THE TOP, SLIDE
TABLE TOP HALVES APART AND PLACE EXTENSION LEAF IN THE OPENING
POSITION. SLIDE TOP HALVES TO HOLD EXTENSION LEAF IN PLACE AND
LOCK THE TABLE LOCKS.
* TO REMOVE EXTENSION LEAF, UNLOCK TABLE LOCK UNDER THE TOP, SLIDE TABLE TOP HALVES
APART. REMOVE EXTENSION LEAF (G) AND SLIDE TOP HALVES TOGETHER.
LOCK THE TABLE LOCKS.