Howard Miller HEKMAN 26120 User manual

8
8
Bolt M8X35 MM
C
ITEM
1
3
QTY.
NO.
A HOWARD MILLER COMPANY
PAGE- 1/2
STEP 5 : Tighten all bolts fully with wrench (3) & (4) then carefully turn the dining table upright.
STEP 2 : Align holes in legs (B) with holes on bottom of top (A) and slide it into position.
Wrench
HARDWARE LIST
2
TO ASSEMBLY :
DESCRIPTIN
STEP 4 : Thread all the flat washer(2) , bolt (1) to leg (B) .Do not tighten bolts fully until all bolts are started.
STEP 1 : Unpack dining table and turn the top assembly (A) upside down on a soft clean surface.
STEP 3 : Assemble the Top(A) with Legs (B) using matching marks (A1-A1) & (B1-B1) .
Flat washer M8X22 MM
A
B
3
1
2
A1
A1
B1
B1
ASSEMBLY INSTRUCTION FOR 26120 DINING TABLE
1

C
STEP 9 : Lock table slides.
PAGE- 2/2
STEP 8 : Push the left and right sliding top of table towards the center.
TO ASSEMBLY :
STEP 5 :Unlock table slides.
STEP 7 :Place the extension top (C) in the center of the table.
A HOWARD MILLER COMPANY
STEP 6 : Pull left & right side sliding top of the table away from the center.
ASSEMBLY INSTRUCTION FOR 26120 DINING TABLE