HP bt1300 User manual

User’s Guide
hp bt1300 Bluetooth wireless printer adapter
Photo of hp bt1300

© 2003 Copyright Hewlett-Packard Development Company, LP
Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under
the copyright laws.
The information contained herein is subject to change without notice.
Publication Number
Online Version 1, October 2003
Applicable Products
J6072A
Trademark Credits
Microsoft®, MS-DOS®, Windows®, Microsoft Windows®are trademarks or U.S. registered trademarks of Microsoft
Corporation.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Hewlett-Packard
Company is under license. Other trademarks and trade names are those of their respective owners.
JPEG software is copyright 1991-1998, Thomas G. Lane. All Rights Reserved. This software is based in part on the work
of the Independent JPEG Group.
Warranty
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting and additional warranty. HP shall not be liable
for technical or editorial errors or omissions contained herein.
Electromagnetic Specifications
For electromagnetic specifications, refer to Appendix C in this User’s Guide.
Safety Considerations
Prior to the installation and use of this product, review all safety markings and instructions.
Instruction Manual Symbol. If the product is marked with this symbol, refer to the product manuals to protect the
product from damage.
NOTE: Denotes important information set apart from the main text.
CAUTION: Denotes a hazard that can damage equipment or data.
WARNING: Denotes a hazard that can cause injury.
Do not proceed beyond a WARNING or CAUTION notice until you have understood the hazard and have taken
appropriate steps.
Hewlett-Packard Company
8000 Foothills Boulevard
Roseville, CA 95747-5677
U.S.A.
!

HP Printer Adapter User’s Guide i
Table of Contents
Chapter 1 – Introduction
Bluetooth Technology Overview.......................................................................................................1-1
HP bt1300 Overview..........................................................................................................................1-1
What’s Included in the Box ...............................................................................................................1-2
Windows System Requirements ........................................................................................................1-3
PDA System Requirements................................................................................................................1-3
About This User’s Guide ...................................................................................................................1-3
Chapter 2 – Hardware Installation Procedures
Before You Begin ..............................................................................................................................2-1
Handling Precautions.........................................................................................................................2-1
Printer Adapter Components..............................................................................................................2-1
Installing the Hardware onto the USB or Parallel Port......................................................................2-2
Verifying Successful Installation.......................................................................................................2-3
Verifying the Connection to the Printer.............................................................................................2-3
Chapter 3 – Printing to your Bluetooth-Enabled Printer
Profile Compatibility..........................................................................................................................3-1
How to Set Up and Print from a Compaq Evo Notebook PC............................................................3-1
Printing the First Job..........................................................................................................................3-5
Printing Additional Jobs.....................................................................................................................3-7
Printing Requirements for Other Devices..........................................................................................3-7
Using the hp bt1300 with a Pocket PC ..............................................................................................3-8
Using the hp bt1300 with Bluetooth-Enabled Cellular Phones........................................................3-13
Chapter 4 – Configuring Your Printer Adapter
Summary of Configuration Steps.......................................................................................................4-1
Installing the HP Configuration Utility..............................................................................................4-2
Placing the hp bt1300 into Configuration Mode or Firmware Upgrade Mode..................................4-2
Using the Configuration Utility .........................................................................................................4-3
Chapter 5 – Troubleshooting
Verifying Setup..................................................................................................................................5-1
Verifying Printer Operation...............................................................................................................5-1
Verifying Bluetooth Communication.................................................................................................5-2
Troubleshooting by Symptom............................................................................................................5-3
Frequently Asked Questions (FAQ) ..................................................................................................5-5
Self-Test Page Example.....................................................................................................................5-7
LED Status Indicators........................................................................................................................5-8
Test Button Sequences.......................................................................................................................5-9
Chapter 6 – Where to Get Help
Worldwide Web Support ...................................................................................................................6-1
Contacting HP....................................................................................................................................6-1

ii Table of Contents
Appendix A – Setting Up a Virtual COM Port
Adding a Virtual COM Port to a PC with Widcomm 1.4 Software using the Serial Port Profile.....A-1
Adding a Virtual COM Port to a PC using Other Bluetooth Software.............................................A-2
Adding a Printer using the Bluetooth Serial Port Profile..................................................................A-4
Appendix B – Printing from Non-HP Devices
Setting Up a Printer Using the Serial Port Profile (SPP)..................................................................B-1
Configuring Other Devices using the Serial Port Profile (SPP)........................................................B-8
Appendix C – Product Specifications
Product Specifications.......................................................................................................................C-1
Appendix D – Safety and Regulatory Notices
FCC Compliance Statement for United States Users........................................................................D-1
Warning.............................................................................................................................................D-1
For European Users...........................................................................................................................D-1
For Canadian Users...........................................................................................................................D-1
Supplementary Information ..............................................................................................................D-1
Declaration of Conformity................................................................................................................D-2
Regulatory Information.....................................................................................................................D-3
Appendix E – Glossary
Glossary ............................................................................................................................................E-1

HP Printer Adapter User’s Guide 1- 1
Introduction 1
Bluetooth Technology Overview
Bluetooth™is the name of a technology specification for small form factor, low-cost, short-range radio
links between PCs, handhelds, mobile phones, and other computing and electronic devices. Bluetooth
is a very low power technology that operates in the 2.4 GHz frequency band. The maximum range of
operation for Bluetooth communication varies between devices from 10 meters (30 ft) to 100 meters
(250 ft).
The communication behavior between two Bluetooth devices is referred to as a profile. A profile
dictates what type of communication can take place between two devices. For two devices to
communicate accordingly, they both have to support the same profile. The iPAQ Pocket PC-supported
profiles are defined in the following sections.
Benefits and Uses
The ability to form an ad hoc network of up to eight devices (known as a piconet) is one of the biggest
benefits of this technology. As an example, this would mean that a piconet could be established in a
conference room during a meeting to connect several devices so that information could be shared.
The fact that Bluetooth operates in a wireless environment means users can be much more mobile in
their daily operations. For example, with Bluetooth, someone can now print to a Bluetooth local
printer instead of a network printer.
Bluetooth does not require a line of site between Bluetooth devices to establish a connection as is
needed for infrared communication. Because Bluetooth operates on RF technology, the connection
signal is able to pass through walls or from within a bag or briefcase.
With Bluetooth technology, an iPAQ Pocket PC user can perform tasks such as the following:
 Synchronize information with their Bluetooth desktop or notebook PC
 Exchange files with other Bluetooth PDAs
 Access the Internet by connecting to and dialing a Bluetooth mobile phone
 Print to Bluetooth printers
Hp bt1300 Overview
The hp bt1300 Bluetooth wireless printer adapter is a wireless print device that plugs directly into the
USB or parallel port of your printer. By using the hp bt1300, you can conveniently print from a
Bluetooth-enabled desktop or laptop computer and other devices without using a cable. Refer to the
Quick-Install Guide provided in the product package for hardware setup information. For additional
information on this product, visit the HP web site at www.hp.com/support/bluetoothprinteradapter.
This manual covers installation and configuration of the hp bt1300 for use with computers, pocket PCs
(PDAs), or mobile phones that have either embedded Bluetooth capability or are equipped to use an
external Bluetooth adapter. A troubleshooting section is also provided in the event that your hp bt1300
does not perform as specified.

1- 2 Introduction
The hp bt1300 supports the following profiles:
 Serial Port Profile (SPP) – allows the use of an emulated serial port for applications that
traditionally use a wired serial port interface, such as synchronizing information between an
iPAQ Pocket PC and a desktop PC using Microsoft™ActiveSync, or printing to a Bluetooth
printer.
 Object Push Profile (OPP) – defines the process of pushing or pulling small objects such as a
business card, calendar appointment, or a task from one device to another.
 Hardcopy Cable Replacement Profile (HCRP) – enables a Bluetooth device to communicate
with a Bluetooth printer directly for advanced printing capabilities, including management of
print jobs, access to specific printer drivers for greater control over formatting, and other
printing features. Specific printer drivers are required to use this profile.
 Basic Printing Profile (BPP) – enables simpler printing from a Bluetooth device to a
Bluetooth printer. Using this profile does not require specific printer drivers. Instead, the
printer has the capability to decipher the information sent to it so that it can produce the desired
format.
 Basic Imaging Profile (BIP) – defines a method for transferring images from one Bluetooth
device (such as a camera) to another Bluetooth device (such as a desktop PC) for storage,
editing, or printing.
The hp bt1300 can also be used with other Bluetooth-enabled devices that support these profiles. For
information on the installation of these other types of Bluetooth-enabled devices, visit the HP web site
at http://www.hp.com/support/bluetoothprinteradapter.
What’s Included in the Box
 hp bt1300 Bluetooth wireless printer adapter
 Power supply module
 USB cable
 Quick-Install Instructions
 hp bt1300 Installation CD
 Warranty card

HP Printer Adapter User’s Guide 1- 3
Windows® System Requirements
To optionally configure the hp bt1300 settings using the provided Configuration Utility, your system
should include the following components:
 A PC with a 133 MHz or higher processor
 Microsoft Windows 98SE, ME, 2000, or XP operating system
 At least 64 MB of RAM (memory)
 At least 10 MB of free hard disk space to install the software
 A CD-ROM drive (to load the software)
 A PC equipped with a Bluetooth USB or PCMCIA card. For a list of compatible Bluetooth
USB, PCMCIA and PC adapter cards, visit the HP web site at
http://www.hp.com/support/bluetoothprinteradapter.
 Vendor-supplied software for your USB or PCMCIA adapter card that supports one or more of
the supported profiles (OPP, BIP, BPP, HCRP, or SPP) is required to run your PC with the hp
bt1300.
PDA System Requirements
For information on printing to the hp bt1300 from a Pocket PC operating system or a Palm OS-based
PDA (Personal Digital Assistant), refer to the information provided in this user’s guide or visit the HP
web site at http://www.hp.com/support/bluetoothprinteradapter.
About This User’s Guide
This user’s guide contains information on system requirements, important safety tips, and instructions
on the following:
 Installing the hp bt1300 Bluetooth wireless printer adapter hardware
 Installing the hp bt1300 Configuration Utility
 Configuring the hp bt1300 using the Configuration Utility and Bluetooth software for Windows
 Using the hp bt1300 with a Microsoft Windows system
 Using the hp bt1300 with other Bluetooth-enabled devices such as mobile phones, PDAs, and
digital cameras.

HP Printer Adapter User’s Guide 2- 1
Hardware Installation Procedures 2
Before You Begin
The hp bt1300 Bluetooth wireless printer adapter is preconfigured at the factory to allow you to print
right out of the box without having to first configure the device. Optionally, you can reconfigure the
device (change the Bluetooth device name, enable/disable the discovery feature, select security
features, and reprogram the device’s firmware) at any time using the provided Configuration Utility
(refer to Chapter 4 – Configuring Your Printer Adapter in this user’s guide for more information).
Before installing the hp bt1300, make sure your printer functions properly. The hp bt1300 supports a
parallel or USB connection to your printer; however, both connections cannot be used simultaneously.
Ensure that you have properly installed your Bluetooth adapter and sending device software on your
Bluetooth-enabled device as described in the documentation for the device.
Handling Precautions
The hp bt1300 is designed to withstand normal handling procedures, but reasonable precautions should
be exercised during installation, particularly with regard to static discharge. Be sure you are properly
grounded by touching an unpainted metal portion of the printer chassis while installing the hp bt1300.
Printer Adapter Components
The hp bt1300 hardware includes the following components (see diagram on the next page):
 Power connector – The power supply cable plugs into this connector.
 Test button – Pressing this button for less than three seconds will print a test page on the
printer. Pressing and holding this button for more than four seconds while applying power to
the device will reset the hp bt1300 to factory default settings.
 LED status indicators – A blue LED (Light Emitting Diode) indicates Bluetooth connectivity
and Bluetooth activity status. A bi-colored LED indicates the operational status of the hp
bt1300. A green color indicates a ready state, and an amber color indicates an error condition.
When in the configuration mode, the bi-colored LED will cycle between amber and green.
Refer to Chapter 5 – Troubleshooting for detailed LED status light descriptions.
 USB port – This port is used for connecting the hp bt1300 to a USB printer. Refer to Chapter
4 – Configuring Your Printer Adapter for instructions on how to use the USB port.
 Parallel Port – This port is used for connecting the hp bt1300 to the parallel port of a printer
equipped with a 25-pin Centronics interface.
NOTE: If the hp bt1300 does not match up to the parallel port on your printer, you will need an IEEE
1284 B-female to C-male cable adapter to connect the hp bt1300 to the parallel port of your printer. The
cable adapter can be ordered on the web at the following web sites or other web sites you may prefer
(www.hp.com, www.pccables.com, or www.blackbox.com).
With certain printers, a B-female to C-male cable (mfg. Part number: mpicc030) may be needed. This
cable can be found and purchased on the HP website or from other vendors on the web using a search
engine and typing “mpicc030” in the search box.

2- 2 Hardware Installation Procedures
Installing the Hardware onto the USB or Parallel Port
1. Connect the hp bt1300 directly to either the USB or IEEE 1284-compliant parallel port of the
printer as shown below. You cannot use both connections simultaneously.
 If you connect the hp bt1300 to the parallel port, be sure to secure the metal locking clasps
located on each side of the parallel connector to prevent the hp bt1300 from being accidently
disconnected.
 If you connect the hp bt1300 to the USB port of the printer, use the supplied Velcro tabs to
attach the printer adapter to the printer or other convenient surface.
IMPORTANT: The hp bt1300 can be connected to either a USB or parallel connection. You cannot use
both connections simultaneously.
2. Plug the power supply module into a suitable AC wall outlet, and then plug the power supply cable
into the hp bt1300 as shown below. When power is applied to the hp bt1300, the blue and amber
LEDs on the device will blink momentarily as it performs self-checking diagnostics. Refer to
Chapter 5 – Troubleshooting in this user’s guide for detailed LED status light descriptions.
NOTE: If you are using the USB connection, the external power supply is required.
Installing the hp bt1300 onto the parallel port Installing the hp bt1300 using the USB connection

HP Printer Adapter User’s Guide 2- 3
Verifying Successful Installation
After the hp bt1300 is attached to the printer and powered ON, it will perform a brief startup sequence:
1. The bi-colored LED (amber) and the blue LED will blink three times simultaneously.
2. The bi-colored LED will alternately blink amber and green twice. The blue LED will not light.
3. The bi-colored LED will illuminate green continuously, and the blue LED will blink continuously,
indicating a ready state. After Bluetooth connectivity has been established, the blue LED will
illuminate continuously.
NOTE: If the bi-colored LED does not illuminate green continuously after the device has finished its startup
sequence, then there may be an error. Refer to Chapter 5 – Troubleshooting in this user’s guide for help.
Verifying the Connection to the Printer
To verify the connection, make sure that both the hp bt1300 and the printer are powered on and ready.
Then print a test page by momentarily pressing the test button on the hp bt1300 for about one
second. If the test page prints successfully, then the hp bt1300 is ready to print, providing that the
client computer and sending device are ready to print.
If the test page does not print, check to make
sure that the hp bt1300 is securely connected to
the printer. Also, ensure the printer is operating
properly and has a sufficient supply of paper
and toner or ink. Switch the hp bt1300 off and
then on again, and then try printing the self-test
page again by pressing the test button for
about one second. If you cannot print a test
page, refer to Chapter 5 – Troubleshooting in
this user’s guide.
Test Button

HP Printer Adapter User’s Guide 3- 1
Printing to your Bluetooth-Enabled Printer 3
Profile Compatibility
Device Profile*Required Elements Page
HP or Compaq Laptop
(embedded Bluetooth or
multiport) with Windows XP
HCRP*hp mobile printing for notebooks (HP 1.4 or Widcomm 1.4
software) 3-1
Laptops with other operating
systems (Bluetooth not
embedded)
SPP*Refer to vendor website A-2
iPAQ SPP*hp mobile printing for pocket PC 3-7
Bluetooth-enabled mobile
phone BPP*Mobile printing application** 3-13
Bluetooth-enabled camera BIP*None required N/A
*Refer to “hp bt1300 Overview” in Chapter 1 for profile definitions.
**The mobile printing application only applies to Nokia 60 series phones. For details, refer to the Nokia website at
www.nokia.com.
How to Set Up and Print from a Compaq Evo Notebook PC
NOTE: The following procedure requires a Compaq Evo notebook PC with HP 1.4 or Widcomm 1.4 Bluetooth
software. If you need to upgrade your software, go to the HP Support web site at
www.hp.com/support/bluetoothprinteradapter.
To set up a printer for a Compaq Evo notebook:
1. Click the Bluetooth icon to open My Bluetooth Places.

3- 2 Printing to your Bluetooth-Enabled Printer
2. Click on Search for Devices in Range.
3. Once all available printers are discovered, right-click on the printer you want to install.

HP Printer Adapter User’s Guide 3- 3
4. Select Add Printer from the pull-down menu.
5. Select a driver for the printer you want to install. The Printer Properties window will pop up,
allowing you to make modifications to the printer settings.

3- 4 Printing to your Bluetooth-Enabled Printer
6. Click on OK to add the printer.

HP Printer Adapter User’s Guide 3- 5
Printing the First Job
After performing the necessary setup and configuration instructions described in the previous sections
of this user’s guide, you should now be able to print in the usual manner from any standard Windows
application program.
1. From the menu bar of your application, click on File, and then Print.

3- 6 Printing to your Bluetooth-Enabled Printer
2. Select the printer name you created, and then click on OK. The hp bt1300’s Serial Port Profile will
automatically establish a connection with your PC as indicated by the Bluetooth connection icon,
or you may need to manually start the connection in your Bluetooth software.
3. After the job is printed, the connection will automatically terminate, and the Bluetooth connection
icon will disappear.

HP Printer Adapter User’s Guide 3- 7
Printing Additional Jobs
After you print the first time, your application will remember the printer you used. If you print again,
the job will be sent to the hp bt1300-equipped printer automatically. You can either click on File,
Print, and OK, or just click on the printer icon on your application’s toolbar, and then click on OK.
If you have more than one hp bt1300 Bluetooth wireless print adapter installed and have added those
Bluetooth printers in your PC, you can select a different printer to print your document before clicking
on OK. In this case, each Bluetooth-equipped printer must use a unique COM port (applies to Anycom
only) in order to send the print job to the correct hp bt1300-equipped printer.
Printing Requirements for Other Devices
Laptops
 The hp bt1300 must be installed and verified as previously described.
 The Bluetooth printer must be installed on the laptop.
PDAs
 The hp bt1300 must be installed and verified as previously described.
 IPAQ pocket PC: The HP Mobile Printing for Pocket PC Utility or other software solution
must be installed on the PDA.
 Palm: A print application such as PrintBoy or other software solution must be installed. Refer
to the vendor’s web site for more information on your particular device.
Mobile Phone
 A print application must be installed. Refer to the vendor’s web site for more information on
your particular device.

3- 8 Printing to your Bluetooth-Enabled Printer
Using the hp bt1300 with a Pocket PC
NOTE: The following procedures were created using an HP h5450 Pocket PC with the HP Mobile Printing Utility
for Pocket PCs (available from the HP web site). This procedure requires the HP Mobile Printing Utility for
Pocket PC software in order to print to the hp bt1300 and assumes that the Pocket PC has Bluetooth enabled.
1. Download the HP Mobile Printing Utility for Pocket PC from HP’s website using the following
web address (http://welcome.hp.com/go/pocketpcprint).
2. After extracting and executing the .exe file, the Welcome window will appear. Click on Next to
continue. Wait for the installation files to completely extract and for the Setup routine to begin.

HP Printer Adapter User’s Guide 3- 9
3. Make sure that your Pocket PC is connected to your desktop via ActiveSync. Setup will then
attempt to connect to the Pocket PC and install the necessary files. Click on OK as soon as the
copying process is complete.
4. As soon as the Pocket PC completes the installation of files copied from the desktop. Tap on Start,
and then HP Mobile Printing.

3- 10 Printing to your Bluetooth-Enabled Printer
5. Tap on Start Using the Program, and then tap on the file you wish to print.
6. To assign a Bluetooth Printer, tap on Print Options, and then tap on More Printers.