HP Officejet 635 User manual

Using a single receiver to connect the HP 975
Dual-Mode Wireless Keyboard and supported mice
to a computer
Use the following procedure to pair the HP 93x Creator Wireless Mouse, HP 635 Multi-Device Wireless Mouse,
or other supported mice and the HP 975 wireless keyboard to your computer, using the keyboard receiver. Be
sure to use the correct receiver.
1. If an HP 93x Creator Wireless Mouse, HP 635 Multi-Device Wireless Mouse, or other supported mouse is
already connected, disconnect the receiver for the mouse from your computer.
2. Remove the cover of the mouse (1), and place the mouse receiver inside of the mouse (2). Replace the
cover on the mouse (3).
After this step, the cursor does not show on-screen when you move the mouse.
3. If the HP 975 wireless keyboard currently is connected or paired, remove the keyboard receiver from
your computer. The keyboard no longer functions after this step. If the HP 975 wireless keyboard is not
connected or paired currently, locate the keyboard receiver but do not connect or pair it. A keyboard and
mouse icon can be seen on the keyboard receiver.
Using a single receiver to connect the HP 975 Dual-Mode Wireless Keyboard and supported mice to a computer 1

4. If the keyboard has not been charged previously, connect the HP 975 Dual-Mode wireless keyboard to
your computer using the USB cable that came with the keyboard, and charge it for 3 hours.
5. Move the keyboard switch to the on position.
6. Press the mouse pairing button on the bottom or on the side until the light appears. Press and hold the
button for 3 to 10 seconds until the receiver light blinks.
2

7. Connect the HP 975 Dual-Mode wireless keyboard receiver into your device. A keyboard and a mouse icon
displays on this receiver.
Both the HP 975 Dual-Mode wireless keyboard and supported mouse connect to your computer using the
keyboard receiver.
Using a single receiver to connect the HP 975 Dual-Mode Wireless Keyboard and supported mice to a computer 3