HP f799w User manual

f799w
Car Camcorder
User Manual

1
目录
Regulatory Notices .................................................................................. 3
Prohibition of Co location ........................................................................ 3
WEEE Notice ............................................................................................. 3
CE Regulatory Notice ............................................................................... 3
Notes on Installation ............................................................................... 4
Caution .................................................................................................... 4
1 Introduction .................................................................................... 7
1.1 Features ............................................................................................. 7
1.2 Package Contents .............................................................................. 7
1.3 Product Overview .............................................................................. 8
2 Getting Start ................................................................................. 10
2.1 Insert the Memory Card ................................................................... 10
2.2 Install in Vehicles ............................................................................. 11
2.3 Connecting to Power ........................................................................ 12
2.4 Powering the Camcorder On / Off and Reset ................................... 13
2.4.1 Auto Power On/Off.................................................................. 13
2.4.2 Manual Power On/Off ............................................................. 13
2.4.3 Reset the camcorder............................................................... 13
2.5 Initial Settings ................................................................................. 14
2.5.1 Set the Date and Time ............................................................ 14
3 Using the Camcorder ...................................................................... 15
3.1 Recording Videos ............................................................................. 15
3.1.1 Auto Recording ....................................................................... 15
3.1.2 Recording Screen .................................................................... 15
3.1.3 Emergency Recording ............................................................. 17
3.2 GPS (Option)..................................................................................... 18
3.3 Rear Camera (Option) ...................................................................... 18
3.4 File Playback .................................................................................... 19

2
3.5 Parking Mode .................................................................................. 19
4 Setting Go Moto Plus pp ................................................................ 21
4.1 Download app ................................................................................. 21
4.2 Wi Fi connection ............................................................................. 22
4.3 Use Go Moto Plus app ...................................................................... 23
4.3.1 Main Screen .................................................................................. 24
4.3.2 Playback, delete, download ......................................................... 26
4.3.3 Camera Setting ............................................................................ 28
4.4 Album .............................................................................................. 29
5 djust the Settings ........................................................................ 32
6 OT Firmware Upgrade ................................................................... 34
7 Specifications ................................................................................ 38

3
bout this Guide
The content in this document is for information purpose and is subject to change
without prior notice. We made every effort to ensure that this User Guide is
accurate and complete.
However, no liability is assumed for any errors and omissions that may have
occurred.
The manufacturer reserves the right to change the technical specifications and
accessories without prior notice.
Regulatory Notices
This document provides country and region specific non wireless and
wireless regulatory notices and compliance information for your product.
Some of these notices may not apply to your product.
Prohibition of Co-location
This device and its antenna(s) must not be co located or operated in conjunction with
any other antenna or transmitter.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery by
users in private households in the European Union
This symbol on the product or on the packaging indicates that
this cannot be disposed of as a household waste. You must
dispose of your waste equipment and/or battery by handling it
over to the applicable take back scheme for the recycling of
electrical and electronic equipment and/or battery. For more
information about recycling of this equipment and/or battery,
please contact your city office, the shop where you purchased
the equipment or your household waste disposal service. The
recycling of materials will help to conserve natural resources
and ensure that it is recycled in a manner that protects human
health and environment.
CE Regulatory Notice
The product herewith complies with the requirements of CB IEC 62368 1:2018,
Radio Equipment Directive 2014/53/EU Article 3.2 and the RoHS Directive
2011/65/EU.
 EU Health Protection: This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.

4
 Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
 Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas.
Notes on Installation
1. Do NOT setup the camcorder while driving or while the vehicle is in motion.
Please stop at a safe place before adjusting or installing.
2. Install the camcorder above the rear view mirror to obtain the best
open field view. Do NOT install the camcorder in a location that will
obstruct your required driving view.
3. Make sure that the lens is within the wiping range of the windscreen wiper
to ensure a clear view even when it rains.
4. Do not touch the lens with your fingers. Finger grease may be left on the
lens and will result in unclear videos or snapshots. Clean the lens on a
regular basis.
5. Use the products of the attached power charger only, please do not
use other brand power charger, in order to avoid equipment burn.
Caution
Never disassemble or attempt repair of this product. Doing so may
damage the camcorder, cause electric shock and void your product
warranty.
Due to local laws and vehicles safety considerations, do not
manually operate the camcorder while driving.
Set up time and date accurately before you use this camcorder.
The firmware function in the camcorder is for reference only, drivers
are advised to exercise discretion based on actual road conditions.
The results of GPS positioning are only for reference, and should not
affect the actual driving situation. The camcorder also cannot ensure
the positioning accuracy.
GPS positioning accuracy may differ depending on weather and
location such as high buildings, tunnels, undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except
glass). Tinted window will also affect the performance of the GPS
satellite reception.

5
GPS reception performance on each camcorder may differ. The
camcorder cannot determine the accuracy of the positioning results
from different hardware.
The values displayed in this system, such as speed, position, and the
distance warning to the speed camera set points, may be inaccurate
due to the influence of surrounding environment. They are for your
reference only.
This product is used only for non commercial use, within the
maximum limits permitted by applicable law. We do not take any
responsibilities for the loss of use of the product.
This camcorder gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of the
product or its accessories and void the warranty.
Wi Fi Signals are unable to pass through the building. The max limit
of signal transmission is 5m.
Wi Fi Operation Channel: Ch1~Ch11
The product employs wireless data communication which may
interfere, or be interfered by, a near by camcorder.
Never use this camcorder in the vicinity of a microwave oven or at
places where there is radio interference.
Radio wave reception may be worsened in specific environments.
Please be advised that if another camcorder is also using the same
2.4GHz band as this product, the processing speed of both
camcorders may slow down.
This product gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of the
product or its accessories and void the warranty.
The radio frequency (RF) generated by this RF electronic camcorder
may cause adverse effects on the operation of other electronic
camcorders and result in malfunctioning. Wireless transmitters and
circuitry may also interfere with other electronic camcorders.
Therefore, do observe the following precautions:
•Aircraft: Never use a radio transmitter when you are in an
airplane. Please switch off the Wi Fi function of the camcorder.
•Vehicle: The radio frequency transmitted by this camcorder may
affect the electronic system in a motorized vehicle. Please
consult the manufacturer or dealer of your vehicle on the
possible effect.

6
•Pacemaker: In order to prevent any potential interference to a
pacemaker, anyone who uses a pacemaker should be advised,
that, when using this camcorder, a minimum distance of 15cm (6
inch) should be kept between the camcorder and the pacemaker;
and never put this camcorder in a chest pocket. In case of any
doubt of interference, switch off the camcorder immediately.
•Medical Camcorder: If you use a personal medical camcorder,
consult the camcorder manufacturer or your physician to
confirm if your camcorder is sufficiently shielded from the RF
transmission of this camcorder.
•Medical Facilities: Hospitals and medical institutes may use
facilities that are sensitive to an external RF energy. Observe
such instructions when the medical care personnel or any
posted sign requests you to switch off any camcorder that may
interfere the radio frequency.
•Explosion sites or any location with a posted sign: In order to
prevent interfering with an explosion activity, observe all the
signage and instructions in the Explosion Area or in a zone with a
“Switch Off 2 way Radios” sign by switching off camcorders that
may interfere with the radio frequency.
HP Inc. is NOT responsible for the loss of any data/content during
operation.
Before you start using the Car Camcorder, it is assumed that you
agree to the abo
ve statement
s
.

7
1Introduction
Thank you for purchasing this advanced camcorder. This camcorder is
specifically designed for real time video and audio recording when driving.
1.1 Features
•Super HD 2304*1296
•F/2.4 Big Aperture
•9.35” Touch Screen
•Built in Wi Fi
•Super Capacitor
•Collision Detection
•Emergency Recording File
•Parking Mode (supports timelapse)
1.2 Package Contents
The package contains the following items. If there are any missing or
damaged items, contact your dealer immediately.
Car Camcorder Rubber band Car adapter
User manual External GPS
(option)
Rear Cam
(option)

8
1.3 Product Overview

9
No. Item
1 Short press: manually power on, LCD on/off
Press and hold 3 seconds: manually power off, reset
2 LCD Screen
3 GPS port for external GPS (option)
4 USB port for car power adapter
5 MicroSD memory card slot
6 A/V port for rear camera (option)
7 Lens
8 Speaker
9,10 Microphone

10
2Getting Start
2.1 Insert the Memory Card
Insert the memory card with the gold contacts facing the back of the
camcorder. Push the memory card until it clicks into place. (Use class V30
or greater speed microSD cards for this camcorder; It is recommended to
format the microSD cards before the initial use.)
To remove the memory card
Push the edge of the memory card inward until you hear/feel it click, then
allow it to push out until you can remove it from the slot.
Note:
1. Do not remove or insert the memory card when the camcorder is powered on. This
may damage the memory card.
2. Use class V30 greater speed microSD cards and capacity higher than 16GB for this
camcorder. Supports up to 128GB.
3. It is recommended to format the microSD cards before the initial use.
4. Please periodically format the memory card (suggest once per month).
5. Use memory card higher than 64GB, please use the camcorder to format the memory
card before initial use.
6. Memory card has certain usage life. Long use may lower down write in speed and
failure saving. In this case, we recommend you to purchase new memory card.

11
2.2 Install in Vehicles
1. Clip on to your original car mirror.
2. Circle the clip with the band.
3. Adjust the camcorder lens.
Note: Image shown here is for installation illustration. The outlook may differ from what
you purchased.

12
2.3 Connecting to Power
Use only the supplied car adapter to power up the camcorder.
1. Connect one end of the car adapter to the USB connector of the
camcorder. USB port input: DC 5V / 2A.
2. Plug the other end of the car adapter to the cigarette lighter socket of
your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on. Car adapter input: DC 12 / 24V.
Note:
Use only the supplied car adapter. DO NOT use the other brand of car adapters;
otherwise, it may cause the product mal function or battery explosion.

13
2.4 Powering the Camcorder On / Off and Reset
2.4.1 uto Power On/Off
Once the vehicle engine is started, wait a few seconds to charge the
camcorder, and then the screen will light up and camcorder automatically
powers on, and start recording.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power.
Note:
1. Automatic power up and shut down assumes the power socket is linked to the car
ignition.
2. The camcorder uses super capacitor as power source. Please wait a few seconds to
charge the super capacitor, and then the camcorder will automatically power on and
start recording.
2.4.2 Manual Power On/Off
To manually turn on the power, press POWER button.
To manually turn off the power, press POWER button for 3 seconds.
2.4.3 Reset the camcorder
To reset, long press POWER button for 8 seconds.

14
2.5 Initial Settings
2.5.1 Set the Date and Time
We recommend you to set up date and time before initial use.
To set the correct date and time, do the following:
1. In the recording screen, tap icon to stop recording.
2. Tap icon to enter Menu.
3. Slide the sub menu up and down to select [date/time].
4. Tap [+][ ]to change the number, and then tap [OK] to confirm setting.
5. Tap icon to return to recording screen.

15
3Using the Camcorder
3.1 Recording Videos
3.1.1 uto Recording
When the vehicle engine starts up, wait a few seconds to charge the
camcorder, then it will automatically turn on and start recording.
Recording will automatically stop when the engine is switched off.
Note:
1. On some cars, the recording will continue when the engine is switched off. If this
happens, please manually turn off the cigarette lighter or remove the car adapter from
the cigarette lighter.
2. It can be configured to save a video file for every 1 minute, 2 minutes or 3 minutes of
recording.
3. The camcorder saves the recording in the memory card. If the memory card capacity is
full, the oldest file in the memory card will be overwritten.
4. The camcorder uses super capacitor as power source. Please wait a few seconds to
charge the super capacitor, and then the camcorder will automatically power on and
start recording.
3.1.2 Recording Screen

16
No icon Item Description
1
Recording
Duration Indicates the video current duration.
2 Date / Time Indicates the current recording date
and time.
3 Menu Menu set up.
4 Playback File playback.
5
Start/Stop
Record Start/stop video recording.
6 Photo Take snapshot
7
Voice
Record Turn on/off voice recording.
8
Emergency
Recording
During video recording, touch this icon
to start emergency recording and lock
the file.
9
GPS Status
If install optional GPS, when GPS is
positioned, the icon will turn to blue
.
10
Screen
Brightness To adjust screen brightness
11 Wi Fi
Wi Fi on, not connected
Wi Fi on, connected
Wi Fi off

17
3.1.3 Emergency Recording
This Car Camcorder is equipped with a G Force sensor. If the G sensor
function is enabled, when collision is detected, the camcorder will
automatically trigger the Emergency Recording feature. The yellow dot on
left top screen corner will blink. The emergency recording files will not be
overwritten by the normal loop recording files.
To manually initiate the emergency recording feature, tap icon during
the normal recording function.
The file length of emergency is as same as interval time of normal loop
recording. Once it reaches setting time, the camcorder will resume to
normal loop recording.
Note:
1. The sensitivity of G sensor can be adjusted in the Menu. Enter Menu and select
[Collision Detection] to adjust Off, Low sensitivity, Middle sensitivity, High sensitivity. If
choose Off, the camcorder will not activate auto emergency recording.
2. The emergency file is created as a new file and saved in Emergency folder, which will
be protected to avoid being overwritten by normal loop recording.
3. The Emergency folder will occupy 20% of available memory card capacity. When the
space is full, it will overwrite the oldest emergency files.

18
3.2 GPS (Option)
Plug the optional GPS accessory into GPS port on the camcorder, you can
preview current car speed and direction such information.
Note:
1. GPS function is limited in certain areas. Please contact dealer for details.
2. When GPS is positioned, the icon will change from white to blue .
3.3 Rear Camera (Option)
Plug the phone jack of rear cam into A/V hole on the camcorder, and hide
and install the cable well. When installation is done, power on the front
camera, then you are ready to use dual cam recording.
Note:
1. Rear camera doesn’t support hot plug n play. Please power off the main camcorder
before plug into rear camera.
2. Finger slide the screen to switch preview image for front or rear camera.

19
3.4 File Playback
In the recording screen, tap icon to stop recording. Tap icon
to enter Playback. Slide the screen up and down to choose desired file to
playback. Tap icon to switch front or rear camera
recorded files.
Note:
Deleted files CANNOT be recovered. Ensure the files you wish to preserve are backup
before deletion.
3.5 Parking Mode
To monitor the vehicle when it is parked, you can activate Parking Mode.
Before activate Parking Mode, please install ACC Cable through
professional car shop.
Follow the steps below to activate Parking Mode,
1. In the recording screen, tap icon to stop recoding, and tap icon
to enter menu.
2. Slide the screen to choose Parking Mode option, tap it to enter and
choose Park Recording, Timelapse, or Collision Detection.
3. Tap icon to return to recording screen.
4. When car’s engine is turned off, the camcorder will enter Parking
Mode automatically. And when car’s engine starts once again, the