HP f870x User manual

Car Camcorder
User Manual
f870x

1
Contents
About this Guide ............................................................................. 5
FCC Statement ............................................................................... 5
Prohibition of co-location................................................................. 6
Important note................................................................................. 6
WEEE Notice .................................................................................. 6
CE Regulatory Notice...................................................................... 7
Battery Warning .............................................................................. 7
Notes on Installation........................................................................ 8
Caution ........................................................................................... 9
1 Introduction...........................................................................13
1.1 Features............................................................................. 13
1.2 Package Contents .............................................................. 13
1.3 Product Overview ............................................................... 14

2
2 Getting Started ..................................................................... 16
2.1 Storage Media.....................................................................16
2.1.1 Insert the Memory Card ............................................16
2.1.2 Remove the Memory Card........................................16
2.2 Installing in Vehicles............................................................18
2.2.1 Mount to Windshield .................................................18
2.2.2 Adjust the device position .........................................19
2.3 Connecting to Power...........................................................21
2.4 LED Indicator ......................................................................24
2.5 Powering the Camcorder On / Off .......................................25
2.5.1 Auto Power On/Off ...................................................25
2.5.2 Manual Power On/Off ...............................................25
2.5.3 Reset........................................................................25
2.6 Initial Settings......................................................................26
2.6.1 Set Time Zone..........................................................26
2.6.2 Set the Date / Time...................................................27
3 Using the Car Camcorder...................................................... 29
3.1 Automatic Record................................................................29
3.1.1 The Recording Screen..............................................30
3.1.2 Emergency Recording ..............................................33
3.2 Add Speed Point .................................................................33
3.3 Picture in Video...................................................................34
3.4 Driving Safety......................................................................35

3
3.4.1 Speed Cam Alert...................................................... 36
3.4.2 Speed Limit Alert...................................................... 36
3.5 Parking Mode ..................................................................... 38
3.5.1 Using embedded battery of car camcorder............... 38
3.5.2 Using car’s battery with ACC cable connected. ........ 41
3.5.3 Connect with power bank......................................... 41
3.5.4 Collision Detection ................................................... 42
3.5.5 Driver Fatigue Alert .................................................. 42
3.5.6 LDWS ...................................................................... 44
3.5.7 FCWS...................................................................... 45
3.5.8 2 GRID FUNCTION CHART .................................... 47
3.6 Playback Videos and Photos .............................................. 47
3.7 The Playback Screen ......................................................... 48
3.8 Deleting Files...................................................................... 50
4 Initial set up Pixi Car application.............................................52
5 Using the Pixi Car application ................................................55
5.1 Camera and Wi-Fi Setting .................................................. 56
5.1.1 Wi-Fi Setting ............................................................ 56
5.1.2 Camera Setting........................................................ 57
5.2 Camera preview, record, snapshot ..................................... 59
5.3 Playback, delete, download ................................................ 61
5.4 Local album........................................................................ 64

4
6 Adjusting the Settings ........................................................... 66
6.1 Using the Menu...................................................................66
6.2 Menu Items .........................................................................66
7 Connecting to Other Devices ................................................. 72
7.1 Connecting to the Computer................................................72
7.2 Connecting to TV ................................................................73
8 Installing the Software........................................................... 74
9 SuperCar ............................................................................. 75
10 Specifications ....................................................................... 77

5
About this Guide
The content in this document is for information purpose and is subject to
change without prior notice. We have made every effort to ensure that
this User Guide is accurate and complete.
However, no liability is assumed for any errors or omissions that may
have occurred.
The manufacturer reserves the right to change the technical
specifications without prior notice.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

6
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
Prohibition of co-location
This device and its antenna(s) must not be co-located or operated in conjunction
with any other antenna or transmitter.
Important note
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance. This
equipment should be installed and operated with minimum distance 20cm
between the radiator & your body. To maintain compliance with FCC exposure
compliance requirements, please follow the operating instructions as documented
in this manual.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery
by users in private households in the European Union

7
This symbol on the product or on the packaging indicates
that this cannot be disposed of as a household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take-back scheme for the
recycling of electrical and electronic equipment and/or
battery. For more information about recycling of this
equipment and/or battery, please contact your city office,
the shop where you purchased the equipment or your
household waste disposal service. The recycling of
materials will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health
and environment.
CE Regulatory Notice
The product herewith complies with the requirements of the battery
directive 2006/66/EC, The 2014/53/EU RED-Directive, The 2009/125/EU
ErP Directive and the RoHS Directive 2011/65/EC.
EU Health Protection: This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Battery Warning
Never dismantle, crush, or pierce the battery, or allow the battery
to short-circuit. Do not expose battery being placed in high
temperature environment, if battery leaks or bulges, stop continue
to use.

8
Always charge using the system. Risk of explosion if battery is
replaced by an incorrect type.
Keep the battery out of reach of children.
Batteries may explode if exposed to open fire. Never dispose of
batteries in a fire.
Never replace the battery on your own; have the dealer do it for
you.
Disposed of used batteries observing local regulations.
Notes on Installation
1. Please measure the front windshield viewing area, make sure not to
block driver's front view, install the camcorder below the rearview
mirror (the central, higher right position of the front windshield). And
we recommend that the sky and the land occupied by the screen
50%, fix the car holder and then adjust the camcorder so that the
lane is aligned with the screen. Proper installation enables the
camcorder to maximize the efficiency also can enhance the
accuracy of LDWS.
2. Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on
the lens and will result in unclear videos or pictures. Clean the lens
on a regular basis.
4. Do not install the camcorder on a tinted window. Doing so may
damage the tint film.

9
5. Make sure that the installation position is not hindered by the tinted
window.
6. This product is suitable for light windshield or light color
heat-resistant film windows , it will affect video quality if install it on
the dark windows or dark heat-resistant film windows.
7. Use the products of the attached power charger only, please do not
use other brand power charger, in order to avoid equipment burn or
cause the battery explosion.
8. We have provided 2 mounting brackets with this HP Car
Camcorder. The suction cup bracket is designed for temporary
mounting and will require periodic re-installation. The adhesive bracket
is designed for one time and long term installation. We recommend
using the adhesive bracket if permanent installation is desired. Please
install the bracket on the best open-field view. Do NOT install the bracket
in a location that may obstruct your field of view and impact driving
safety. HP or our authorized HP partners are NOT liable for any
damages or data loss due to improper bracket mounting or suction cup
bracket losing seal and dropping.
Caution
Due to local laws and vehicles safety considerations, do not
operate the camcorder while driving.
Set up time zone, time and date accurately before you use this
camcorder.
Please use SuperCar software under the condition that Electronic
Map are functioning normally.

10
The firmware function in the camcorder is for reference only,
drivers are advised to exercise discretion based on actual road
conditions.
The results of GPS positioning are only for reference, and should
not affect the actual driving situation. The camcorder also cannot
ensure the positioning accuracy.
GPS positioning accuracy may differ depending on weather and
location such as high buildings, tunnels, undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except
glass). Tinted window will also affect the performance of the GPS
satellite reception.
GPS reception performance on each camcorder may differ. The
camcorder cannot determine the accuracy of the positioning
results from different hardware.
The values displayed in this camcorder, such as speed and
position, may be inaccurate due to the influence of surrounding
environment. They are for your reference only.
This product is used only for non-commercial use, within the
maximum limits permitted by applicable law. We do not take any
responsibilities for the loss of use of the product.
This camcorder gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
Wi-Fi Signals are unable to pass through the building. The upper
limit of signal transmission is 5m.
Wi-Fi Operation Channels List: Ch1~Ch13.

11
The product employs wireless data communication which may
interfere, or be interfered by, a near-by camcorder.
Never use this camcorder in the vicinity of a microwave oven or at
places where there is radio interference.
Radio wave reception may be worsened in specific environments.
Please be advised that if another camcorder is also using the same
2.4GHz band as this product, the processing speed of both
camcorders may slow down.
This product gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
The radio frequency (RF) generated by this RF electronic
camcorder may cause adverse effects on the operation of other
electronic camcorders and result in malfunctioning. Wireless
transmitters and circuitry may also interfere with other electronic
camcorders. Therefore, do observe the following precautions:
Aircraft: Never use a radio transmitter when you are in an
airplane. Please switch off the Wi-Fi function of the
camcorder.
Vehicle: The radio frequency transmitted by this camcorder
may affect the electronic system in a motorized vehicle.
Please consult the manufacturer or dealer of your vehicle on
the possible effect.
Pacemaker: In order to prevent any potential interference to a
pacemaker, anyone who uses a pacemaker should be
advised, that, when using this camcorder, a minimum

12
distance of 15cm (6 inch) should be kept between the
camcorder and the pacemaker; and never put this camcorder
in a chest pocket. In case of any doubt of interference, switch
off the camcorder immediately.
Medical Camcorder: If you use a personal medical camcorder,
consult the camcorder manufacturer or your physician to
confirm if your camcorder is sufficiently shielded from the RF
transmission of this camcorder.
Medical Facilities: Hospitals and medical institutes may use
facilities that are sensitive to an external RF energy. Observe
such instructions when the medical care personnel or any
posted sign requests you to switch off any camcorder that
may interfere the radio frequency.
Explosion sites or any location with a posted sign: In order to
prevent interfering with an explosion activity, observe all the
signage and instructions in the Explosion Area or in a zone with a
“Switch Off 2-way Radios” sign by switching off camcorders that
may interfere with the radio frequency.
HP Inc. is NOT responsible for the loss of any data/content during
operation.
Before you start using the system, it is assumed that you
agree to the above statement.

13
1Introduction
Thank you for purchasing this advanced Car Camcorder. This product is
specifically designed for real time video recording when driving. It also
supports a HP rear camera. You might ask distributor for further
information.
1.1 Features
SONY Sensor, low light enhancement
Full HD 1920*1080
3.0" TFT-LCD color screen
155° Wide angle lens
Collision Detection, when a collision is detected, the camcorder will
automatically trigger the emergency recording
Parking Mode (Motion detection, Vibration detection)
Multifunction traffic safety reminder
1.2 Package Contents
The package contains the following items. In case there is any missing
or damaged item, contact your dealer immediately.
Car camcorder
Bracket X 2
CD-ROM
Quick start guide
Car charger
Rear Camera

14
(option)
Note:
We recommend using the adhesive bracket if permanent installation is desired. Do NOT install the
bracket in a location that may obstruct your field of view and impact driving safety. HP or our
authorized HP partners are NOT liable for any damages or data loss due to improper bracket
mounting or bracket losing seal and dropping.
1.3 Product Overview
No.
Item
No.
Item
1
LED Indicator
9
Wide Angle Lens

15
2
LCD Color Screen
10
Reset
3
Menu / Back Button ( / )
11
Microphone
4
Playback / Up Button ( / )
12
Power Switch
5
Snapshot / Down Button ( /
)
13
Power Connector Port
6
Emergency Recording / Confirm
Button ( / )
14
Memory Card Slot
15
HDMI Connector Port
7
Switch Camera Button ( / 2CH)
16
Rear camera connector port
(option)
8
Speaker
17
Bracket Socket
Note:
Please press the button (3~7) according to the diagram notice shown on screen.

16
2Getting Started
2.1 Storage Media
2.1.1 Insert the Memory Card
Insert memory card with the pins facing forward and the screen of the
camcorder facing forward too, see the picture as below:
2.1.2 Remove the Memory Card
If the camcorder is power on, please power off first and wait for the
procedure of switching off the camcorder completed before removing
the memory card.
Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This may damage
the memory card.
2. Support SDHC class 10 and memory storage 8GB or above (support up to 32GB).

17
3. Please format the micro SD cards before the initial use. The formatted file type for this camcorder
is FAT32 file.

18
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Push the mount into mount slot on top of
device, until a click sound is heard.
2. Peel off the protective plastic sheet from
the adhesive bracket.

19
3. Place and press down the bracket firmly onto your windshield.
Make sure the base is
securely locked in place.
2.2.2 Adjust the device position
1. Loose the knob to swivel the device vertically or horizontally.
Knob