HTC Desire 626G+ dual sim User manual

1. Make sure your phone is off
and is facing down. Open
the slot cover with your
thumb or finger.
2. The two upper slots are
nano SIM slots with trays. To
remove the tray from each
slot, insert your fingernail in
the small groove in the tray
and then pull the tray out.
3. Place your nano SIM cards
into the trays with the gold
contacts facing up and the
cut-off corner facing out.
Note: You can insert a 3G nano
SIM card in either slot. When you
have two cards inserted, only
one card can connect to the
3G network. The other card will
connect to the 2G network only.
SIM 1 connects to the 3G
network by default. You can also
set which card connects to 3G.
For details, see the user guide.
gold contacts
cut-o corner
nano SIM
HTC Desire 626G+ dual sim
___ Inserting your nano SIM and microSD cards
IMPORTANT:
Use a standard nano SIM only.
Don’t cut a micro SIM or regular SIM card and
insert it into the nano SIM slot. It’s thicker than
the standard nano SIM card and may get stuck
in the slot.
The back cover and battery are not removable.
Don’t pry the back cover open or remove
the battery by force. This will invalidate the
warranty.

4. When reinserting the
nano SIM trays, make sure
they are facing up so that
the nano SIM cards don’t
fall out. Slide the trays all
the way into the slots.
5. Insert your microSD™
card into the bottom slot,
with the gold contacts
facing up and towards the
slot. Slide the card all the
way in until it clicks into
place.
6. To close the slot cover,
slide the plastic hinge
into the side and press
the cover until it clicks
into place.
microSD
gold contacts
4
5
91H0xxxx-xxM Rev.A
htc.com
© 2015 HTC Corporation. All rights reserved.
HTC, the HTC logo, and HTC Desire are trademarks of HTC
Corporation.
microSD is a trademark of SD-3C LLC.
All other company, product and service names mentioned herein
are trademarks, registered trademarks or service marks of their
respective owners.
Want some guidance on using your phone?
Go to www.htc.com/support/ to find the user guide,
latest news, and more.