HTC HTC Legend Assembly instructions

HTC Legend
Screen Repair Guide
Touch Screen Repair

For more instructional repair guides for other makes or models, view our full catalog of Repair Guides!
This guide shows how to disassemble the HTC Legend cell phone quickly and safely. This guide is designed by the
RepairsUniverse team.
This guide will help you to install the following HTC Legend parts:
•HTC Legend Touch Screen Digitizer Glass Replacement
Tools Required:
•Safe Open Pry Tool
•T6 Torx Screwdriver
•Adhesive Strips (For Touch Screen Digitizer)
•Hot Air Gun / Hair Dryer
HTC Legend Take Apart Repair Guide:
•The first step will be to pry up the back-bottom cover using safe open pry tool. Remove the battery and the sim
card from the phone.
•You will now need to unscrew five (4) screws using the T6 screwdriver located in figure 1.
Figure 1
•Pry up the back-top cover using safe open pry tool. Remove the two (2) screws using the T6 screwdriver located
at the top of the phone.

Figure 2
•Now you can carefully pry the screen assembly and motherboard from the back housing. It may take some time to
work the assembly out of place.
•Once the screen assembly and motherboard have been removed, remove the 2 torx T6 screws located in figure
3. You can now remove the lower assembly.
•Remove the plastic housing on the back side of the assembly by using a safe open pry tool to carefully unclip the
housing.
Figure 3
•The motherboard will now be exposed. Use a safe open pry tool to release the 3 connectors located on the
motherboard. If the connection is a "jaw" connector, simply lift the lip and carefully slide out the cable.
•Once the screen is completely released, you can take it out of the assembly.

Figure 4
You can now heat the front of the screen assembly to warm the adhesive. Use a heat gun or hair dryer on a medium
setting for about 45 seconds, using quick movements around the outside edges.
Use a safe open pry tool to pry between the touch screen digitizer and front frame, carefully releasing it from the
housing. Reheat if necessary.
Carefully release the touch screen flex cable from the back of the screen assembly and feed it through the housing to
fully remove the digitizer.
Your HTC Legend is now disassembled and ready for replacement of part(s). Reverse the instructions
above to reassemble your Legend.
Notice:
Repairs Universe's guides are for informational purposes only. Please click here for details.
Learn about restrictions on reproduction and re-use of Repairs Universe's repair/take-apart/installation guides, and about
creating hyperlinks to our guides.