HUANUO HNTS4 User manual

Thank you for choosing this Huanuo product! At Huanuo
we strive to provide you with the best quality products
and services in the industry. Please share your experience
of our product with others on www.huanuoav.com/reviews
if you are satisfied. Should you have any issues, please
don't hesitate to contact us.
Telephone:
1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Email: [email protected] (US/CA)
Website:
www.huanuoav.com
V1.0
Gas Spring Aluminum Monitor Desk
Instruction Manual
Model: HNTS4

1
Check the VESA Pattern of Your Monitor beforeYouBegin the Installation
• Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact our
customer service at [email protected].
CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We are not liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.
• This product contains a high pressure gas spring, fire and percussion prohibited.
Also it is strictly prohibited to dismantle without professionals. Please return to the
manufacturer or hand over to professional agencies if the product is abandoned.
• The desk must be capable of supporting three times the weight of the total load
(the mount, the monitor and all accessories weight). Don't use the product on
particle board.
IMPORTANT SAFETY INFORMATION
If your Monitor VESA is greater than 100x100 mm/4x4 in. or less than
VESA 75x75mm/3x3in., this mount is NOT compatible.
Weight Restrictions
75 mm ≈ 3 in.
100 mm ≈ 4 in.
Minimum VESA pattern:
75mm/3 in.(W)x75mm/3 in.(H)
MAX:100
mm/4 in.
MAX:100
mm/4 in.
MAX:100
mm/4 in.
If this desk mount is NOT compatible, please contact customer service
at [email protected] to find a compatible product.
DO NOT exceed the maximum weight indicated.This
mounting system is intended for use only with the maximum
weights indicated. Use with products heavier than the
maximum weights indicated may result in failure of the mount
and its accessories, causing possible damage or injury.
WARNING
If your monitor or laptop weighs more, this mount is NOT compatible.
Monitor
8KG
(17.64 lbs)
Laptop
5KG
(11.02 lbs)

Small Allen Key
Large Allen Key
Medium Allen Key
Nut
N Q R
f (x1)
g (x2)
Laptop mount
Non-slip mat

T
T S
S
small
Large Allen Key
Small Allen Key

ST
R
T
R
S
Large
Allen Key
Medium
Allen Key
Medium
Allen Key
Large
Allen Key

X
Y
Small
Allen Key
A/C B/D
U U
YX
bolts
bolts
X
Small
Allen Key
Step 3-1 Slide the locating ring [Q],
extension arm [Y], locating ring [Q] and
supporting part [X] in sequence to the
pole.

Step 4 Attach the Monitor and Laptop Tray to Arms
bolts
V
K
f
f
g
bolts
Y
Small
Allen Key
Y
W

Large
Allen Key
W
Y
W
Large
Allen Key (L)
(L)
5
6