Huawei G2200C User manual

G2200C
GSM Mobile Phone
User Guide
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's
Republic of China
Tel: [phone] Global Hotline: [phone]
E-mail: [email protected] Website: www.huawei.com

Copyright © Huawei Technologies Co., Ltd. 2009. All
rights reserved.
No part of this document may be reproduced or transmitted in any
form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
The product described in this manual may include copyrighted
software of Huawei Technologies Co., Ltd and possible licensors.
Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease,
assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by
respective copyright holders under licenses.
Trademarks and Permissions
, , and are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned
are the property of their respective owners.
Notice
Some features of the product and its accessories described herein
rely on the software installed, capacities and settings of local
network, and may not be activated or may be limited by local
network operators or network service providers. Thus the
descriptions herein may not exactly match the product or its
accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify
any information or specifications contained in this manual without
prior notice or obligation.

NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT
AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE
ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO
CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,
OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR
ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and
regulations and will obtain all necessary governmental permits and
licenses in order to export, re-export or import the product
mentioned in this manual including the software and technical data
therein.

i
Table of Contents
1 Getting to Know Your Phone .................................................... 1
Your Phone ..........................................................................1
SIM Card..............................................................................2
Charging the Battery ............................................................2
Keys.....................................................................................3
Screen Icons.........................................................................4
2 Getting Started ........................................................................ 5
Phone Lock ..........................................................................5
PIN and PUK ........................................................................6
WAP ....................................................................................6
Keypad Lock.........................................................................6
3 Call Functions .......................................................................... 7
Making a Call.......................................................................7
Answering a Call ..................................................................7
Rejecting/Ending a Call .........................................................7
4 Text Entry................................................................................. 8
Changing the Text Input Mode .............................................8
Entering an English Word .....................................................8
Entering a Digit ....................................................................9
Entering a Symbol ................................................................9
5 Messaging ............................................................................... 9
Writing and Sending a Text Message ....................................9
Writing and Sending a Multimedia Message .......................10
6 Radio .................................................................................... 10
7 Warnings and Precautions....................................................... 12

1
1 Getting to Know Your Phone
Your Phone
The following figure shows the appearance of your phone and it is
for your reference only.
1 Earpiece/Speaker 3 Charger jack
2 Headset jack 4 Microphone

2
SIM Card
Insert your SIM card before using your phone. Remove the SIM card
and the battery only after powering off your phone.
The following figures show the installation of the SIM card.
1. Insert the SIM card. 3. Install the battery cover.
2. Insert the battery.
Charging the Battery
1. Connect the charger to an AC power socket.
2. Connect the charger to the charger jack on the phone.
3. Wait until the battery is completely charged.
During the charging, the charging icon is displaying in animation.
When the charging icon becomes static, the battery is fully
charged.
4. Disconnect the charger from the phone.
5. Disconnect the charger from the AC power socket.

3
Keys
zIn this manual, the navigation keys of your phone are
indicated by the follow icons: , , , .
zTo customize the four navigation keys as the shortcuts to
different functions, select Menu > Settings > Shortcut
Settings.
Press ... To …
zMake a call.
zAnswer an incoming call.
zView call logs in standby mode.
zPower on or off the phone (by pressing and holding
the key for about 5s).
zEnd or reject a call.
zReturn to the standby mode.
Select the option displayed in the lower left corner of
the screen.
Select the option displayed in the lower right corner
of the screen.
zAccess the default shortcuts in standby mode.
zDuring a call, increase the volume ( ) or
decrease the volume ( ).
zAccess the main menu in standby mode.
zConfirm a selection.

4
Press ... To …
–
zEnter digits, letters, and symbols.
zCall the voice mail center in standby mode (by
pressing the 1key for about 3s).
zSpeed-dial phone numbers in standby mode (by
pressing and holding the 2–9keys for about 3s).
zIn standby mode, press the key once to enter *,
twice to enter +, and three times to enter P.
zEnable or disable Meeting profile in standby mode
(by pressing and holding the key for about 3s).
zEnter #.
zLock the keypad in standby mode (by pressing and
holding the key for about 3s).
Screen Icons
Icon Indicates …
Signal strength.
GPRS.
The phone is roaming.
Battery power level.
An alarm is activated.
The keypad is locked.
The Silent profile is activated.
The General profile is activated.

5
Icon Indicates …
The Outdoor profile is activated.
The Meeting profile is activated.
The My Profile is activated.
The headset is plugged.
Unread voice message(s).
Unread text message(s).
The SMS memory is full when the icon is red.
Unread multimedia message(s).
Unread push message(s).
The call forwarding function is enabled.
Ongoing call.
2 Getting Started
Phone Lock
The phone lock protects your phone from unauthorized use. By
default, the phone lock function is disabled. You can change the
default phone lock code (0000) into any numeric string in the range
of four to eight digits.
Do remember your phone lock code. If you forget it, contact the
service center.

6
PIN and PUK
The personal identification number (PIN) protects your SIM card from
unauthorized use. The PIN unblocking key (PUK) can unlock the
blocked PIN. Both PIN and PUK are delivered with the SIM card. For
details, consult your service provider.
If you enter wrong PINs for a specified number of times consecutively,
the phone asks you to enter the PUK.
If you enter wrong PUKs for a specified number of times
consecutively, the SIM card is invalidated permanently. Contact your
service provider for a new one.
WAP
WAP page browsing is network dependent. To use this service, you
need to contact your network service provider, subscribe to the GPRS
service, and obtain the settings such as the WAP gateway.
Set the related parameters and then launch the browser. Then you
can surf the Internet through your phone, downloading your desired
images, ringtones, or music.
Keypad Lock
To lock the keypad in standby mode, press and hold for about
3s. When the keypad is locked, you can still press to answer
incoming calls or make emergency numbers.
To unlock the keypad in standby mode, press and then
in succession.
If the Auto Keypad Lock function is enabled and if the phone is idle
in standby mode for a specified period of time, the phone
automatically locks the keypad.