Huawei G6610 User manual

G6610
GSM Mobile Phone
User Guide
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's
Republic of China

Tel: [phone] Global Hotline: [phone]
E-mail: [email protected]m Website: www.huawei.com
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.
No part of this document may be reproduced or transmitted in any form or
by any means without prior written consent of Huawei Technologies Co.,
Ltd.
The product described in this manual may include copyrighted software of
Huawei Technologies Co., Ltd and possible licensors. Customers shall not in
any manner reproduce, distribute, modify, decompile, disassemble, decrypt,
extract, reverse engineer, lease, assign, or sublicense the said software,
unless such restrictions are prohibited by applicable laws or such actions
are approved by respective copyright holders under licenses.
Trademarks and Permissions
, HUAWEI, and are trademarks or registered trademarks of
Huawei Technologies Co., Ltd.
Other trademarks, products, services, and company names mentioned are
the property of their respective owners.
Notice
Some features of the product and its accessories described herein rely on
the software installed, capacities and settings of local network, and may
not be activated or may be limited by local network operators or network
service providers. Thus the descriptions herein may not exactly match the
product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any
information or specifications contained in this manual without prior notice
or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED
BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL
HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and
regulations and will obtain all necessary governmental permits and licenses
in order to export, re-export or import the product mentioned in this
manual including the software and technical data therein.

Table of Contents
1 Getting to Know Your Phone ................................................1
Your Phone ........................................................................................... 1
Keys and Functions ........................................................................... 2
Screen Icons......................................................................................... 4
2 Getting Started .......................................................................5
Installing the SIM Card and the Battery................................... 5
Removing the Battery and the SIM Card................................. 6
Installing the microSD Card .......................................................... 6
Charging the Battery........................................................................ 6
Using the Function Menu .............................................................. 7
Phone Lock........................................................................................... 7
PIN and PUK ........................................................................................ 8
Locking the Keypad .......................................................................... 8
3 Call Function ...........................................................................9
Making a Call....................................................................................... 9
Answering a Call................................................................................. 9
4 Text Entry ............................................................................. 11
Changing the Text Input Mode..................................................11
Multi-tap Input Mode....................................................................11
Predictive Input Mode...................................................................12
Entering a Digit.................................................................................12
Entering a Symbol ...........................................................................13

5 Messaging ............................................................................ 14
Writing and Sending a Text Message .....................................14
Writing and Sending a Multimedia Message......................14
6 Contacts ................................................................................ 16
Creating a New Contact................................................................16
Searching for a Contact ................................................................16
7 Multimedia ........................................................................... 17
Camera .................................................................................................17
Video Recorder.................................................................................17
Video Player.......................................................................................18
FM Radio .............................................................................................18
8 WAP....................................................................................... 20
Network Settings .............................................................................20
Connecting to the Network ........................................................20
9 Warnings and Precautions ................................................. 22

1
1 Getting to Know Your Phone
Your Phone
The following figure shows the appearance of your phone and
it is for your reference only.
1
2
3
4
5
6
7
8
9
10
11
12
13
14

2
Keys and Functions
Press… To…
Make a call.
Answer an incoming call.
View call logs in standby mode.
Power on or power off the phone (by pressing
and holding the key for about 3s).
End a call or reject an incoming call.
Return to the standby mode.
(Left)
Display Menu in standby mode.
Select the highlighted item.
(Right)
Display Phonebook list in standby mode.
Return to the previous menu.
1 Receiver 8 Sym key
2 Screen 9 Space key
3 Right soft key 10 Aa key
4 Message short key 11 Alt key
5 End key 12 Call /send key
6 Clear key 13 Home key
7 $ key 14 Left soft key

3
Press… To…
Display Menu in standby mode.
Confirm a selection.
Access Video player , Inbox , User
profiles , and Tone setup in standby
mode.
Enter numbers, letters, and characters.
Call the voice mail center in standby mode (by
pressing and holding the 1key for about 3s).
Speed-dial phone numbers in standby mode (by
pressing and holding the 2–9keys for about 3s).
Select a submenu item labeled with the
corresponding number.
Delete the words and symbol
Alt key
Enable or disable the vibration mode in standby
mode (by pressing and holding the key for about
3s).
Enter key
Switch text input modes when editing texts.
Press this key to input ?

4
Press… To…
Space key
Display the symbol list in any text input mode.
Screen Icons
Icon Indicates…
Signal strength.
GPRS signal.
The incoming call alert type is”Ring only”
The incoming call alert type is”Vib. only”
The incoming call alert type is”Vib. and ring ”
The incoming call alert type is”Vib. then ring ”
The Bluetooth has been activated
The Headset profile is activated.
Missed call(s).
The call forwarding function is enabled.
A new text message is received.
A new multimedia message is received.
A new push message is received.
An alarm or the schedule is activated.
The keypad is locked.
Battery power level.

5
2 Getting Started
Installing the SIM Card and the Battery
Ensure that the golden contact area on the SIM card is facing
downward, and the beveled corner is properly aligned with the
SIM card slot.
install SIM card
Battery
SIM card

6
Removing the Battery and the SIM Card
Before removing the battery and the SIM card, ensure that your
phone is powered off.
Battery SIM card
Installing the microSD Card
Ensure that inserting the memory card with the golden contact
area facing up.
T-Flash Card
Charging the Battery
1. Connect the charger to the charger jack on the phone.
2. Connect the charger to an AC power socket.

7
3. Wait until the battery is completely charged.
During the charging, the charging icon is displayed in
animation. When the charging icon becomes static, the
battery is completely charged.
4. Disconnect the charger from the phone.
5. Disconnect the charger from the AC power socket.
Using the Function Menu
1. In standby mode, press (Menu) or.
2. Press to select the desired function menu.
3. Press (OK) or to display the selected menu.
4. Press to select a submenu.
5. Press (OK) or to display the menu.
6. Press (Back) to return to the previous menu or
exit the function menu.
To return to the standby mode, press .
Phone Lock
The phone lock protects your phone from unauthorized use. By
default, the phone lock function is disabled. You can change the
default phone lock code (1234) into any numeric string of four
to eight digits.
Do remember your phone lock code. If you forget it, contact
the service center.

8
PIN and PUK
The personal identification number (PIN) protects your SIM
card from unauthorized use. The PIN unblocking key (PUK) can
unlock the blocked PIN. Both PIN and PUK are delivered with
the SIM card. For details, contact your service provider.
If you enter wrong PINs for a specified number of times
consecutively, the phone asks you to enter the PUK.
If you enter wrong PUKs for a specified number of times
consecutively, the SIM card is invalidated permanently. Contact
your service provider for a new one.
Locking the Keypad
To lock and unlock the keypad, press (Unlock) and
then
If the Auto keypad lock function is enabled and the phone is
idle for a preset period in standby mode, the keypad is locked
automatically.
When the keypad is locked, you can press to
answer an incoming call.

9
3 Call Function
Making a Call
1. In standby mode, enter the phone number.
To make an international call, press to enter the plus sign
(+). Then enter the international long distance code, country
code or region code, area code, and phone number in
sequence.
To call an extension, enter the phone number, press to
insert P, and then enter the extension number.
2. Press to dial the number.
3. Press to end the call.
You can also make a call through call logs, contacts,
and messages.
During a call, press to adjust the volume.
Answering a Call
When there is an incoming call, you can do as follows:
Press or to answer it.
Press (Options) and select Answer to answer it.
Press or (Reject) to reject it.

10
If the Any key answer function is enabled, you can press any
key except and to answer an incoming
call.

11
4 Text Entry
Changing the Text Input Mode
The indicator of the current text input mode is displayed in the
upper left corner of the screen. You can press to change
the text input mode.
Indicator Text Input Mode
Smart ABC Predictive input mode
ABC and abc Multi-tap input mode
123 Number input mode
Press (Clear) once to delete the letter on the left
of the cursor. Press and hold (Clear) for about 3s
to clear all the letters.
In any text input mode press to enter a
space.
Multi-tap Input Mode
In multi-tap input mode, you can press a key labeled with the
desired letter to enter the first letter on the key.

12
Press to select and enter commonly used
punctuations.
Press and the keys to input the silk-screen
punctuations on the keypad.
Predictive Input Mode
In predictive input mode, enter a word as follows:
1. Press each key only once according to the spelling sequence
of the desired word.
The phone displays the commonly used word according to
the sequence of key presses.
2. Press to scroll to the desired word.
3. Press to enter the word.
Press to display commonly used punctuations.
Entering a Digit
In "123" input mode, you can directly press a number key
labeled with the desired digit.

13
Entering a Symbol
1. Press to display the symbol list.
2. Press to scroll to the desired symbol.
3. Press to enter the symbol.

14
5 Messaging
Writing and Sending a Text Message
1. Select Menu > Messages > SMS > Write message.
2. Write the message.
3. Press (Options)for the following options:
Send only: to enter a phone number or select a recipient
from the contact list, and send the message.
Send and save: to add a recipient and send the message
with saving it.
Save: saving the message.
Send to many: to add several recipients at a time and send
the message.
Send by groups: to add all members of a group as
recipients and send the message.
Writing and Sending a Multimedia
Message
1. Select Menu > Messages > MMS > Write message.
2. Select To, Cc, or Bcc.
Add phone numbers or email addresses to be sent, carbon
copied, or blind carbon copied to.
3. Select Subject.
Edit the subject of the message.
4. Select Edit content.
Edit the content of the message. You can add pictures, audio

15
and video clips, attachments and bookmart text to the
multimedia message. You can also insert a new slide,
preview the message, and set the slide duration.
5. Press (Options) and select Done.
6. Press for the following options:
Send only: to send the multimedia message.
Save and send: to send and save the multimedia message.
Save to drafts: save the multimedia message to drafts.
Save as templates: save the multimedia message as
templates.
Send options:set some parameters for sending multimedia
message.
Contact your service provider for the availability of the
Multimedia Messaging Service (MMS) and the method
for subscribing to this service.
Open multimedia messages with caution. Objects in
multimedia messages may contain viruses that can
damage your phone, such as malicious software.