Huawei MATE 9 PRO User manual

Quick Start Guide

1
For more information
Go to http://consumer.huawei.com/en/ to download the
user guide for your device and read the FAQ, privacy
policy, and other information.
Go to
Settings > About phone > Legal information to
read the legal information.
Please visit http://consumer.huawei.com/en/support/
hotline/ for the most up-to-date contact information for
your country or region.

2
Your phone at a glance
Before you start, let's take a look at your new phone.
• To turn on your phone, press and hold the power
button until your phone vibrates and the screen turns
on.
• To turn off your phone, press and hold the power
button, and then touch .
To forcibly restart your phone, press and hold the
power button until your phone vibrates.
Status indicator
Optical proximity sensor
Ambient light
sensor
Secondary
microphone 2
Secondary
microphone 1
Dual-lens
camera
Laser sensor
Dual-tone flash
Infrared sensor
Front camera
Volume button
Power button
USB-C port
Primary microphone 1
Primary
microphone 2
Speaker
Headset jack
Left navigation
key
Right navigation
key
Primary
navigation key/
Fingerprint
scanner
Earpiece

3
Getting started
Follow the instructions in the following figures to set up
your phone.
• Do not insert or remove a SIM card while your
phone is on.
• Ensure that the SIM card is in the correct position
and keep the card tray level when inserting it into
your phone.
Please exercise caution when using the SIM ejector
pin to avoid hurting your fingers or damaging your
phone. Store your pin in a safe place out of the reach
of children to prevent them from swallowing it or
injuring themselves by accident.
Caution
Insert the SIM card into the correct card slot to ensure
that it can be recognized by the phone.
/BOP4*.
/BOP4*.

4
Dual card dual standby single
pass
Your phone supports only dual card dual standby single
pass, which means you cannot use both SIM cards for calls
or data services simultaneously.
• When you are on a call using SIM card 1, SIM card 2
cannot be used to make or answer calls. If someone
calls SIM card 2, the caller will hear a voice message
similar to "The subscriber you dialed is out of the
service area" or "The subscriber you dialed cannot be
connected for the moment, please try again later."
The actual message will vary by service provider.
• When you are using SIM card 1's data service, SIM
card 2's data service will be disabled.
Your phone's single pass feature helps reduce power
consumption and increase your phone's standby time. It is
not related to your service provider's network conditions.
It may be a good idea to contact your service provider and
subscribe to missed call reminder and related assistance
services to avoid the conflicts mentioned above.