Huawei eSpace IAD208E(M) User manual

eSpace IAD208E(M) Integrated Access Device
V300R001C04
Quick Start
Issue
04
Date
2012-06-11
HUAWEI TECHNOLOGIES CO., LTD.

Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
Huawei Technologies Co., Ltd. provides customers with comprehensive technical
support and service. For any assistance, please contact our local office or company
headquarters.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://enterprise.huawei.com

Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner
reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by respective copyright
holders under licenses.
Trademarks and Permissions
, ,
and are trademarks or registered trademarks of Huawei
Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of
their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and may not be activated or may be
limited by local network operators or network service providers. Thus the descriptions
herein may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS
REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE
SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,
BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and
will obtain all necessary governmental permits and licenses in order to export, re-export
or import the product mentioned in this manual including the software and technical
data therein.

eSpace IAD208E(M) Integrated Access Device
Quick Start
1 Packing List
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
1 Packing List
After you unpack the product package, check the items in the following table. If the
items in the package are inconsistent with those in the table, contact the sales person.
Name
Quantity
IAD208E(M)
1
Voice-and-data splitter
8
Power supply component (AC/DC power adapter and
power cable)
1 (optional)
CD
1
Quick Start
1
Certification
1
The AC/DC power adapter is allocated to the IAD according to the actual power supply
mode.
When the IAD208E(M) adopts the local power supply mode, the power supply adapter
needs to be used.
When the IAD208E(M) adopts the remote power supply mode (that is, the remote
power supply device provides power for the IAD208E(M) through the network cable),
the AC/DC power supply adapter does not need to be used.

eSpace IAD208E(M) Integrated Access Device
Quick Start
2 Safety Precautions
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
2 Safety Precautions
Pay attention to the following precautions when installing and using the device.
Basic Requirements
Follow the requirements of the manufacturer to install the device.
Do not disassemble the device. Contact the specified maintenance station if the
faults occur on the device.
Any company or person cannot change the design of the structure, security, or
performance without permission.
Comply with the related laws and regulations, and respect the legal rights of others
when using this device.
Usage Notice
Use the accessories shipped with the product and the recommended accessories,
such as the power supply adapters and batteries. The power supply voltage must
meet the requirement on the input voltage of the device.
Keep the power plug clean and dry to avoid the electric shock and other potential
risks.
Keep your hands dry when plugging in or out the device cable.
Stop the device and turn off the power before plugging in or out the device cable.
In the lightning weather, turn off the power and remove all the cables from the
device, such as the power cable, network cable, and phone cable. Otherwise, the
device may be damaged by the lightning.
If you do not need to use the device for a long time, turn off the power and remove
the power plug.
Keep the water and other liquids away from the device. If the liquid accidentally
flows into the device, turn off the power immediately and remove all the cables
from the device, such as the power cables and network cables. Contact the
specified maintenance station if faults occur.
Do not use the damaged or aged cables.
If exceptions occur, for example, the device is smoking, the sound is abnormal, or
the device turns smelly, stop using the device and turn off the power immediately.
Remove all the cables connected to the device, such as the power cables and
network cables. Contact the specified maintenance station when faults occur.
Prevent the objects (such as the metal) getting into the device from the heat
dissipation hole.

eSpace IAD208E(M) Integrated Access Device
Quick Start
2 Safety Precautions
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
Avoid scratch or wear and tear on the device shell. Otherwise, the dropped paint
may cause allergy or device exceptions. For example, short circuit may be caused if
the paint drops into the host.
Keep children away from the device and accessories to avoid the dangerous
behaviors such as swallowing.
Cleaning Notice
Before you clean the device, stop the device and turn off the power. Remove all the
cables connected to the device, such as the power cables and network cables.
When you clean the device, do not use the liquid cleaner or spray cleaner to clean
the device shell. Use the soft cloth to wipe and clean the shell.
Environment Requirements
Keep the device dry when storing, transporting, and using the device.
Avoid the collision when storing, transporting, and using the device.
Place the device in the indoor environment with good ventilation and without direct
and strong sunlight.
Keep the device clean to avoid dust.
Do not place any object on the device to avoid the overheating of the device or
damage caused by extrusion.
Clear the space with the radius of over 10 cm around the device for heat
dissipation.
Keep the device away from the heat sources or exposed fire, such as the electrical
heater or candle.
Keep the device away from the appliance with the strong magnetic field or
intensive electric field, such as the microwave oven, fridge, or mobile phone.
Environment Protection
Do not discard the obsolete devices or batteries randomly. Discard them at the
specified recycle station.
Comply with the local laws and regulations on processing the device package
materials, consumed batteries, and obsolete devices, and support the recycling.

eSpace IAD208E(M) Integrated Access Device
Quick Start
3 Installation
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
3 Installation
The IAD208E(M) is deployed in a box. You only need to connect the cables during
installation.
Installing the IAD208E(M)

eSpace IAD208E(M) Integrated Access Device
Quick Start
3 Installation
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Procedure
Step 1 Connect the uplink cable.
Connect the WAN port on the IAD208E(M) panel to the network port of the uplink
network device (such as a switch or router) through a network cable.
Step 2 Connect the cables of users.
1. Connect the LAN port on the IAD208E(M) panel to the LINE port of the splitter
through a network cable.
2. Connect the VOICE port of the splitter to the POTS port through a telephone cable.
3. Connect the DATA port of the splitter to the network port of the PC through a
network cable.
4. (Optional) If you need to connect more devices, you can connect other LAN ports
of the IAD208E(M) to the splitters, and then connect the splitters to the PC, IP
phone, or POTS phone.
Do not connect the network port of the PC to the LAN port of the IAD208E(M)
through a network cable directly to access the Internet. This is because the extra
power is consumed when the power supply is provided for IAD208E(M) remotely
and the splitter is not used.
To avoid the signal attenuation, the network cables between the IAD208E(M) and
the splitter and between the splitter and the PC must be shorter than 100 meters.
The cable, such as twisted pair cable, cannot be longer than 2 km. It is
recommended that the cable be shorter than 1 km.
Step 3 Connect the CONSOLE port of the IAD208E(M) to the serial port of the PC through a
serial port cable. (Perform this step only when you maintain the IAD208E(M).)
Step 4 Ensure that all the cables are correctly connected. Connect the DC end of the power
supply adapter to the power supply port of the IAD208E(M). Connect the plug of the
power supply adapter to the socket, and then turn on the power.
----End

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
4 Manual Configuration (Web)
About This Chapter
The IAD provides users with the Web management system. The system runs the
customer page in the Internet Explorer. The page is easy-to-use, reliable, and visual for
users. The chapter describes how to configure about typical scenes and advanced
parameters in the Web mode. In addition, some titles are marked with (SIP) or (MGCP)
to indicate that these service configurations can be implemented over SIP or MGCP.
4.1 Logging In to the Web Management System
The IAD208E(M) supports data configuration and maintenance management in Web
mode.
4.2 IAD (SIP) Accessing the NGN/IP PBX Network
Users of the IAD208E(M) register with the SoftSwitch to implement the voice service.
After configuring the data on the SoftSwitch, configure the data on the IAD208E(M).
Then the IAD208E(M) can register with the SIP server to implement the voice service.
4.3 IAD (MGCP) Accessing the NGN/IP PBX Network
Users of the IAD208E(M) register with the NGN/IP PBX to implement the voice
service. After configuring data on the SoftSwitch, configure data on the IAD208E(M)
to implement the voice service.
4.4 IAD (SIP) Connecting to the IMS
Users of the IAD208E(M) register with the IMS to implement the voice service. After
configuring data in the IMS, configure data on the IAD208E(M) to implement the
voice service.
4.5 Setting UCEMS Parameters
On the IAD, you can set basic parameters for the communication with the Unified
Communication Element Management System (UCEMS) so that the IAD can be
managed by the UCEMS.
4.6 Accessing Network Through the IAD
A PC can use the switch function of an IAD to access the network.
4.1 Logging In to the Web Management System
The IAD208E(M) supports data configuration and maintenance management in Web
mode.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Establishing the Web Configuration Environment
The IAD hardware connections are set up and the IAD is powered on.
Use the network cable to connect the network port of the PC to any network port of the
IAD208E(M). If the PC network port does not support self-adaptation, you need to use
the crossover cable. Set IP addresses of the PC and IAD (the default IP address of the
IAD is 192.168.100.1) in the same network segment to ensure that the PC can ping the
IAD successfully.
Logging In to the Web Management System
1. Start the Microsoft Internet Explorer. Enter the IP address of the IAD208E(M) (the
default IP address is 192.168.100.1) in the address box. The login page is displayed,
shown as follows.
If you changed the IP address of the IAD, you can do as follows to obtain the IP address.
Dial *127 on the phone connected to the IAD, and then the voice announcement plays
the IP address.
Log in to the IAD through the serial port and run the display ipaddress command in the
normal user mode to view the IP address of the device. How to log in to the IAD
through the serial port, see Logging In Through Local Serial Port.
2. Set the system language to simplified Chinese or English as required. Enter the user
name and password and click Login. By default, the user name is root, the
password is admin and the protocol is SIP. Take the SIP version as an example,
and the page is displayed as follows.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
3. After you log in to the system, you can click Change Password at the upper right
corner of the page to set a new password. After the password is set, record related
data.
The web management system provides inner help information on the Web page. Configure
the data according to the help information. And this document does not introduce the help
information repeatedly.
4.2 IAD (SIP) Accessing the NGN/IP PBX Network
Users of the IAD208E(M) register with the SoftSwitch to implement the voice service.
After configuring the data on the SoftSwitch, configure the data on the IAD208E(M).
Then the IAD208E(M) can register with the SIP server to implement the voice service.
Data Planning
Obtain the following data from the administrator before configuring the data.
Item
Example
IP address of the IAD208E(M)
IP address: 192.169.1.62
Subnet mask: 255.255.255.0
Gateway IP address: 192.169.1.1
IP address of the SIP server
IP address: 192.169.1.40
SIP user ID
8900
SIP user password
1234
Procedure
Step 1 View the current protocol mode. Choose Advanced Configuration > Protocol Mode
to display the protocol mode setting page.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
If the protocol mode is SIP, you do not need to change it. If the protocol mode is MGCP,
you need to select SIP and click OK. The IAD needs to be restarted if the protocol is
switched. The configured data will be lost after switching; therefore, switch the
protocol with caution. The protocol can be switched after about two minutes. You need
to log in to the IAD again and configure data.
Step 2 Enter the typical scenario. Log in to the Web management system, and
click to start the guide configuration.
Step 3 (Optional) Set the network parameters for the IAD208E(M).
1. Click Start, the page of Basic Configuration > Network Parameter is displayed.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
2. Set the parameters in the WAN area. As planned, set the IP address for the
IAD208E(M) to 192.169.1.62, subnet mask to 255.255.255.0, and default gateway
to 192.169.1.1. Click OK.
There are three methods for obtaining the IP address. Select a method according to the actual
network and configure with the help information on the Web.
3. A confirm dialog box is displayed, as shown in the following figure. Click OK.
The IAD restarts automatically. Log in to the system again after about two minutes.
If change IP obtain mode, the new IP address may be changed after the IAD restarts
automatically. With dialing *127 to listen to the IP address through the telephone
connected to the IAD or connecting to the IAD through the serial port cable to view the
IP address.
When DHCP or PPPoE is selected, it takes you about 8 minutes to restart the IAD if the
IAD cannot obtain IP address from the DHCP or PPPoE server. And please check the
network ensure the DHCP or PPPoE server available and the information of the server
is right.
After changed the IP address, log in the system again, and proceed from Step 2.
4. Set the DNS IP address.
If the DNS server exist in the actual networking, set the parameters in the DNS area
on the IP address setting page of IAD web management to implement connecting to
other network devices according to the domain name.
a. Set DNS obtain mode to Manually or Automatically. If Static is selected to
obtain the IP address, you can select only Manually.
b. Enter an IP address in Primary DNS IP and enter an IP address in Secondary
DNS IP as required.
c. (Optional) Set Domain name suffix, for example, set it to huawei.com.
Step 4 Configure the SIP server.
1. Click Next, and the page of SIP Service Configuration > SIP Server is displayed.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
2. Click STATIC and click OK to confirm the Obtain type.
The IAD208E(M) supports the switch over between active and standby SIP servers.
The IAD registers with the active SIP server first. If the registration fails, the IAD
registers with the standby SIP server. After the active SIP server is restored, the
IAD automatically switches to the active SIP server to register SIP users.
To enable the IAD to switch between active and standby SIP servers, click On for
Auto Switch on the page of SIP Service Configuration > SIP Server.
By default, the IAD registers with servers 0, 1, and 2 in sequence.
3. Select the record corresponding to index 0. Then click Modify to display the SIP
server modification page.
According to the provided data, click IP address mode and enter the IP address of the
SIP server in the Server IP address textbox. You do not need to configure User
domain name. For other parameters, use default values. Then click OK.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
If you select DNS mode or set the domain name for the SIP server in static mode, make sure
the DNS has been configured. For detail, see Step 3.4; If you select DHCP mode, make sure
obtain the IP address of the SIP server in DHCP mode.
Step 5 (Optional) Set the port number of the SIP signaling.
Click Next, the page of SIP Service Configuration > Local Port is displayed. The
default port number of the SIP signaling is 5060. You are not advised to change the port
number. If change the port and then click OK.
Step 6 Configure the SIP user.
1. Click Next, and the page of SIP Service Configuration > FXS User is displayed.
2. Select the checkboxes of the items to be configured. Enter the values of User ID
and Password according to the provided data. The parameters of User name,
Password and Group ID are optional, which are decided by the carrier. Then click
OK.
Step 7 (Optional) Configure the SIP digitmap.
1. Click Next, and the page of SIP Service Configuration > SIP Digitmap is
displayed.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
2. Click Add. Add the digitmap value on the displayed page.
3. Click OK to finish the digitmap configuration.
Step 8 Save the data.
1. Click Next, and the page of System Tool > Save Data is displayed.
2. Click OK to save the data.
3. Click Finish to end the configuration.
----End
Verifying Configuration Result
After the preceding configuration is complete, the IAD is running normally. You can
use the following method to verify the configuration:
If the IAD is running normally, the PWR indicator is steady on, the RUN indicator
blinks one second on and one second off, the uplink WAN indicator is steady on,
and indicators from 1 to 8 are on when a user picks up the phone.
Choose SIP Service Configuration > FXS User. The FXS configuration page is
displayed. View the user registration status. If the state is Registered, it indicates
that the user is registered successfully.
Make calls to verify the correctness of the configuration. If calls can be made or
received successfully, it indicates that the data is configured correctly.
If a fault exists, check whether the data is correctly configured. If the data is correct but
the fault persists, see the Troubleshooting Guide in the CD-ROM to locate the fault.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
4.3 IAD (MGCP) Accessing the NGN/IP PBX Network
Users of the IAD208E(M) register with the NGN/IP PBX to implement the voice
service. After configuring data on the SoftSwitch, configure data on the IAD208E(M)
to implement the voice service.
Data Planning
Obtain the following data from the administrator before configuring the data.
Item
Example
IP address of the IAD208E(M)
192.169.1.62
IP address of the default uplink gateway of the IAD208E(M)
192.169.1.1
IP address of the media gateway controller (MGC)
192.169.1.70
Domain name (MG domain name) of the IAD208E(M)
shenzhen
Authentication Mode
HW-Mode
Authentication Key
12345678
Procedure
Step 1 View the current protocol mode. Choose Advanced Configuration > Protocol Mode
to display the protocol mode setting page.
If the protocol mode is MGCP, you do not need to change it. If the protocol mode is SIP,
you need to click MGCP and click OK. The IAD needs to be restarted if the protocol
is switched. The configured data will be lost after switching; therefore, switch the
protocol with caution. The protocol can be switched after about two minutes. You need
to log in to the IAD again and configure data.
Step 2 Enter the typical scenario. Log in to the Web management system, and
click to start the guide configuration.
Step 3 (Optional) Set the network parameters for the IAD208E(M).
1. Click Start, the page of Basic Configuration > Network Parameter is displayed.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
2. Set the parameters in the WAN area. As planned, set the IP address for the
IAD208E(M) to 192.169.1.62, subnet mask to 255.255.255.0, and default gateway
to 192.169.1.1. Click OK.
There are three methods for obtaining the IP address. Select a method according to the actual
network and configure with the help information on the Web.
3. A confirm dialog box is displayed, as shown in the following figure. Click OK.
The IAD restarts automatically. Log in to the system again after about two minutes.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
If change IP obtain mode, the new IP address may be changed after the IAD restarts
automatically. With dialing *127 to listen to the IP address through the telephone
connected to the IAD or connecting to the IAD through the serial port cable to view the
IP address.
When DHCP or PPPoE is selected, it takes you about 8 minutes to restart the IAD if the
IAD cannot obtain IP address from the DHCP or PPPoE server. And please check the
network ensure the DHCP or PPPoE server available and the information of the server
is right.
After changed the IP address, log in the system again, and proceed from Step 2.
4. Set the DNS IP address.
If the DNS server exist in the actual networking, set the parameters in the DNS area
on the IP address setting page of IAD web management to implement connecting to
other network devices according to the domain name.
a. Set DNS obtain mode to Manually or Automatically. If Static is selected to
obtain the IP address, you can select only Manually.
b. Enter an IP address in Primary DNS IP and enter an IP address in Secondary
DNS IP as required.
c. (Optional) Set Domain name suffix, for example, set it to huawei.com.
Step 4 Configure the MG data. Click Next, and the page of MGCP Service Configuration >
MG is displayed.

eSpace IAD208E(M) Integrated Access Device
Quick Start
4 Manual Configuration (Web)
Issue 04 (2012-06-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
Enter values in the MG Domain, MG port, Auth-Mode and KEY text boxes. Click
OK to complete the settings. MG Domain and MG port must be configured and
Auth-Mode and KEY are optional. All the parameters must be the same as the settings
on the MGC.
Step 5 Configure the MGC data. Click Next, and the page of MGCP Service
Configuration > MGC is displayed.
Click IP address mode in the MGC1 area and enter the MGC IP address. The MGC
port normally uses the default value 2727. Click OK to complete the settings.
If the DNS is configured, you can select the DNS mode to configure the domain name of the
MGCs.