Huawei Home Broadband User manual

Home Broadband
Home Broadband Indoor Modem
User Guide
(Windows and Mac)
Version 1.0

Index
1. Product overview 2
2. Home Voice 3
3. Home Broadband and Voice 7
4. Home Broadband and Voice (with Wi-Fi router) 11
5. Troubleshooting guide 19
Product overview
Thank you for purchasing your Home Broadband Indoor
Modem herein after referred to as the Indoor Modem. It is
a complete voice and data gateway. No software installation
is needed and you can be up and running in minutes.
Box contents
The Indoor Modem package contains the following items:
1. Indoor Modem
2. Ethernet cable
3. Telephone cable
4. Power adapter
5. User guide
6. Warranty card
21

Home Voice
Note: •Intheeventofapoweroutageyouwillbeunabletomake
emergency calls. Always keep a mobile phone as a backup.
 •TelephonesetisnotprovidedbyNawras.
Unpack your Indoor Modem
Note: •Pleasedonottouchorusethe“RESET”buttonand
concealed external antenna port.
43

Place Modem near a window and connect the power cable and then
connect to the power socket. After two minutes, check the blue LEDs
(see image below). The number of LEDs lit up indicates the strength
of the signal. Three blue LEDs means you have an excellent signal.
If less than three LEDs are lit, try placing the Modem at different
locations. Sometimes turning the Modem  a little can improve your
signal strength.
Markthebestlocationwiththe“HotSpot”sticker provided inside
the box, in case the modem is accidentally moved.
Connect the telephone to the black input labelled TEL using
telephone cable supplied. Once you hear the dial tone you can start
to make your voice calls.
Note:•Please make sure that “WiMAX”
LED’s showing signal strength on the
modem are stable before connecting
the laptop or telephone, this typically
takes up to two minutes.
 •Ifyouareadataonlyuser,telephone
set is not required.
FrontSide
65
Step 1
Step 2
Step 3

Home Broadband and Voice
87
Connect the Ethernet cable between your laptop and the yellow LAN
port on the modem.
Step 4
Please follow steps 1 to 3

109
Open a browser page and visit any website.
A login page will appear. Enter your Username and Password. Keep
the domain field as shown below.
You can find your Username in the customer subscription contract
and your Password in the sealed envelope.
Step 5
A browser page will open showing the online connection
duration box.
Keep this connection window minimised
1. Closing the window will terminate the internet session.
2. Please start another window for normal browsing.
3.Onceyouhavenishedbrowsingwerecommendto“Disconnect”.
Login Success!!!
Disconnect Change
Password
00 : 00 : 05
Step 6

1211
Step 7
Please follow steps 1 to 3 only
Home Broadband and Voice
(withaWi-FiRouter)*
Note - Dear customer if you were using your Indoor modem without Wi-Fi
routerearlier,pleasedisconnecttheInternetsessionbypressing“Disconnect”
button as shown on page 10.
 *Wi-Firouterisoptionalandneedtobepurchasedseparately.
OR
ThefollowingarethestepsforaNawrasWi-FiRouteravilablefrom
anyNawrasStore:
UnpacktheNawrasWi-FiRouterandconnecttopowersupply
usingpoweradaptorsuppliedwiththeRouter.
Using the ethernet cable supplied with the Modem, connect the
LAN port on the back of the Modem to the internet port on the
Router.
To initially set up the Wi-Fi connection, 1 connect the Ethernet
cablesuppliedwiththeRoutertoanyoneoftheportsmarked
LANontheRouterandtoyourPCor2connectusingWi-Fi
connectionwithdefaultSSID“Nawras_Broadband”andpassword
“1234567890”
1
2

1413
SelectNawrassetupandclicknext.
SelectAdminasaUsernameandleavethepassword
field blank and click login.
Step 9
Step 8
Openyourinternetbrowserandtypehttp://192.168.0.1tostart
conguringtheWi-FiRouter.
Step 10
CreateanAdminpassword*foryourRouterandenteritinthetwo
fields shown, to avoid unauthorised access. We advise you to keep a
note of this password in a safe place.
*ThisisnotthesameastheNawraspasswordprovidedinthesealed envelope.
Enter the Username [e-mail] as shown in your
customer subscription contract.
Enter your Password from the sealed envelope in the fields marked
Password and Verify Password. Then click Next.
Step 11
Step 12

1615
Personlise your own Wi-Fi network name (letters and numbers) and
enter in the Network Name field.
CreateaWi-Fiaccesspassword*andenterintheeldprovided.We
advise you to keep a note of this password in a safe place. Then click
next.
*ThisisnotthesameastheNawraspasswordprovidedinthesealed envelope.
Step 13
ClickSave.
TheRouterwillnowrestart.Pleasewaitforoneminutebefore
continuing.
Disconect the Ethernet cable (if used) between your PC and the Wi-Fi
Router.
Step 14

1817
Make sure that internet LED on Wi-Fi router is blinking and
lit green.
•Please establish Wireless
Network connection on
your PC/laptop to access
Internet via Wi-Fi.
Step 15
Now establish a wireless network connection between your PC and the
Wi-FiRouter.
Firstly you may need to activate the wireless function on your PC and
then open "View Available Wireless Networks"
SelectyournetworkandclickConnect.
Enter your Wi-Fi access Password, verify and click Ok.
Mabrook! Now you have
wireless internet in your home

Troubleshooting guide
Indoor Modem
1. The power LED indicator is not ON.
• Check the power supply is properly connected.
2. The modem power light is not ON or the blue WiMAX LEDs keep changing
between 1 and 3.
• Check the power supply is properly connected.
• Try moving the modem to an open space or near a window to get a better
signal so all three WiMAX LEDs are lit. A slight rotation of the modem can
also sometimes improve signal strength.
• Please do not place your modem close to any large electrical appliance or
device that produces a strong electromagnetic eld, such as a microwave
oven, fridge, or satellite dish antenna.
3. I am not able to make phone calls.
• Check the power supply is properly connected.
• Check the modem and your telephone are properly connected with the
correct cable.
• Check the WiMAX signal stability on the modem, a slight rotation of the
modem can also sometimes improve signal strength.
2019
4. I am not able to reach the Nawras Home Broadband login page.
• Check the cable connections as shown in this User Guide.
• Check the WiMAX signal stability on the modem, a slight rotation of the
device can improve the signal strength.
• Make sure your PC or laptop LAN port connection is set to “Obtain IP
Address Automatically” and “Obtain DNS Server Address Automatically”.
Using Windows XP : Go to Start Menu > Settings > Control Panel
> Network Connections > Wireless Network Connection > Refresh
network list > Select your network name > Connect
Using Windows 7 : Go to Start Menu > Control Panel > Network and
Sharing Center > Select your network name > Connect
Using Mac : Go to System Prefereces > Network > Turn Airport On and
select your network name.
• Unplug the LAN cable and re-connect after 30 seconds.
5. I am not able to login.
• Please check that you have entered the Username and Password correctly
as Username and Password are case sensitive.
6. I am not able to connect using Wi-Fi router.
• For further support or to check that your service is properly activated
please call Nawras customer services on 2200 1500.

21
Internet Username
Password(SealedEnvelope)
RouterAdminPassword
Wi-Fi access password
Notes: