Huawei B310 LTE CPE User manual

B310 LTE CPE
Quick Start

31507518_01

1
1Product overview
Power indicator Network status indicator
Wi-Fi®/WPS indicator LAN/WAN indicator
Signal strength indicator SIM card slot
External antenna sockets WPS button
Power button Reset button
Power input Network port
Landline phone port

2
2Setup
Insert a SIM card into the SIM card slot as shown in the preceding diagram
and then connect the power adapter to the B310 router. The router will
turn on automatically and search for available mobile networks.
The following indicators will turn on when the router has successfully
connected to a network.
Cyan/blue/yellow:
Connected to a mobile
network.
White: More signal bars
indicate a stronger signal.
Do not insert or remove a SIM card when the router is running, as this may
affect performance or d
amage the SIM card.

3
3Connecting to your router's Wi-Fi
network
SSID：....................
WIFI KEY：.............
abcdefg
XXXXXXXX
WIFI KEY：YYYYYYYY
XXXXXXXX
WIFI KEY：
YYYYYYYY
Once the router has connected to a mobile data network, you can connect
your computer or mobile phone to the router's Wi-Fi network to access the
Internet. Please refer to the label on the bottom of the router for the
default wireless network name (SSID) and password (WIFI KEY).

When the indicator is steady on, Wi-Fi is enabled. To enable or
disable Wi-Fi, refer to the help section on the router's web-based
management page.

Ensure that you promptly change the Wi-Fi network name and
password on the web-based management page to prevent
unauthorized access to your Wi-Fi network. Once you have changed the
password, you will need to reconnect to the router's Wi-Fi network.

4
4Configuring your router
IP：XXX.XXX.X.X
User：yyy Password:zzz
User:
yyy
Password:
zzz
XXX.XXX.X.X
XXX.XXX.X.X
User：
yy y
Password：
zzz
You can configure the router using the web-based management page.
Please refer to the label on the bottom of the router for the default IP
address, user name, and password.
More information can be found in the help section of the web-based
management page.
Ensure that you promptly change the default login password for the web
-
based management page to prevent unauthorized users from changing
the router's settings.

5
5Optional configurations
1. Connecting multiple devices
You can connect a computer, or landline phone to the router to access the
Internet, make telephone calls, and more.
The features described
in this section are for reference purposes only. Your
router may not support all of these features.

6
1
2
2. Installing external antennas
You can install external antennas to improve signal reception. Please
contact your network service provider to purchase the antennas. If you
only require one antenna, plug it into the socket.

Turn off the router and unplug the power adapter before installing any
external antennas.

External antennas are only suitable for indoor use. Do not use external
antennas during thunderstorms.

Only use external antennas provided by your network service provider.

7
3. Accessing the Internet through an Ethernet port
You can connect the router to a wall-mounted Ethernet port using an
Ethernet cable to connect to the Internet when you have used up your
data allowance.
Configure the relevant settings on the web-based management page
before connecting to the Internet through an Ethernet port. More
information can be found in the help section of the web-based
management page.

8
4. Downloading Huawei HiLink
Scan the above QR code to download the Huawei HiLink app and
configure the router from your phone.

9
6Additional information
If you are experiencing any issues with the router:
Restart the router.
Refer to the help section on the web-based management page.
Restore the router to its factory settings.
Contact your network service provider.
Please visit http://consumer.huawei.com/en/support/hotline for recently
updated hotline and email address in your country or region.
7FAQs
How do I restore factory settings?
When the router is turned on, press the reset button for approximately 3
seconds using a pointed object until the indicator starts to blink.
Restoring factory settings will clear all customized settings. Proceed with
caution.
How can I connect to the router using Wi-Fi Protected Setup
(WPS)?
To connect a WPS-enabled device to your router using the WPS button:
1. Press and hold the WPS button on the router for at least 2 seconds until
the indicator starts to blink.
2. Enable WPS on your device within 2 minutes to connect to the router's
Wi-Fi network.
The illustrations in this guide are for reference purposes only and may not
reflect the exact appearance of your product. Please contact your network
service provider for more detailed information.

10
8Troubleshooting
Why is the indicator red after I have finished
configuring the router?
1. Make sure you have a working SIM card and ensure that it is inserted
properly.
2. Move the router to an open space free from obstructions and make sure
you have an available mobile network in your area.
3. If the problem persists, please contact your network service provider.
Why is the indicator status steady on cyan, blue, or
yellow, but the indicator is off?
Your mobile network has poor reception. Move the router to a place with
better reception.
Why can't I access the router's web-based management
page?
1. Ensure that your computer is connected to the router through an
Ethernet cable or Wi-Fi.
2. Ensure that your computer is set to obtain an IP address and DNS server
address automatically.
3. Restart your browser, or try using another browser.
4. If the problem persists, restore the router to its factory settings.