Huawei InZone E960 User manual




Thank you for choosing Optus Wireless
This guide is here to help you set-up your Optus Wireless service.
Contents
 About the InZone E960 device 3
 6 Step set-up guide 4
 Setting up your Optus Member Services Account 7
 Setting up an Optus Wireless Broadband Username 7
 Optus Member Services – Checking your usage 8
 My Usage 9
 Optus Email – Webmail 9
 Conguring your email 10
• Outlook Express 10
• Outlook 2003 11
• Outlook 2007 11
• Windows Vista 12
• Apple Mac 12
 Setting up a WiFi Network (WLAN) 13
 How to access WiFi 21
• Windows XP 21
• Windows Vista 21
• Apple Mac 22
 Accessing the InZone E960 online User Guide or Online Help 22
 Using the Optus Wireless Telephone service 23
• How to obtain your telephone number 23
• General tips 23
• Using Optus Voicemail 23
• Call Waiting 24
• Call Forwarding 25
• Transferring your existing number to Optus 25
• Telephone quick reference guide 26
 Troubleshooting 27
 What do the indicator lights on the InZone E960 mean? 28
 Things you must know about this service 29
 Safety Precautions 30
 Optus Statement on Customer Service Standards 31



About the InZone E960 device

 Phone Cable Connection
 Ethernet Cable Connections
 Power Adapter Connection
 Pedestal
 Network Mode Indicator
 Signal Strength Indicator
 Power Button (ON/OFF key)
 WiFi (WLAN) Indicator
 Power Indicator
 SIM Card Cradle
 Reset Button
:
• The InZone E960
• Pedestal
• An Ethernet Cable (Grey)
• A Power Adapter (white)
• User Guide
• 6 Step set-up guide











The InZone E960 uses the Optus Mobile 3G/HSPA (2100MHz) network to deliver your
wireless service.

6 Step set-up guide






 The signal light may blink when connecting to the network. If the signal light is red,
your service is not active.
 Service activation takes up to 24 hrs from receipt of the device.






 Within 24 hours your Home or Business phone number will be allocated, after this
time call from your device to nd out your number.


Remove Telephone Cable from wall
socket.
Plug your Telephone Cable into the
telephone socket on the InZone device.
Your Telephone is now connected
to the InZone device and ready
to make phone calls.









Open your internet browser and enter  into the
address eld and hit For your convenience, add to your favorites or bookmark.
Remember, excess usage charges apply once you reach your monthly data
allowance.

• When dialling a number, you will experience a slight delay before you hear the
ringing tone; this is normal for this type of service. To reduce this delay, press 
after you have dialled the number.
• To set-up and access WiFi – refer to page 13.
• To port your existing telephone number – refer to page 25.
• Things you must know about this service – refer to page 29.

Congratulations!
You are now set-up to browse the Internet on your Optus Wireless Broadband service
and make calls if you have chosen Optus Wireless Fusion.
, Optus Fusion customers will be able to use the Internet and make telephone
calls straight away, but these will appear as calls made from a mobile number until your
home or business number has been assigned. This may take up to 24 hours.



Read on to nd out how to:
• Set-up an Optus Username and email account
• Access Member Services including the Internet Usage Meter
• Set-up a wireless home network (WiFi)
• Use your Wireless Telephone service
• Troubleshoot
• Use your service safely
Setting up your Optus Member Services Account
Member Services provides you access to a number of service features including:
• An Internet Usage Meter, so you can manage your usage
• An Optus email account
• The ability to personalise the Optus myZOO portal
• The Optus Internet Security Suite
To access these features you will need an Optus Wireless Broadband Username.


With your InZone E960 connected to the Internet, type the below web address into the
address eld of your web browser:

: You can only access the set-up page when you are connected to the Internet via your wireless device.


Follow the online instructions and enter a Username and Password into the elds as
indicated, then click  The Username you select will be used as part of your email
address and will allow you to access Member Services.

We have provided a section at the back of this guide for you to record your Username,
Password and email address.

Member Services, allows you to keep track of your usage (via My Usage), access to
Webmail (via Web Services) and download the Optus Internet Security Suite.
To access Member Services go to  click on
 and then click on .




The  page allows you to manage your usage during your billing month.
To access the  page, go to the Member Services section of the myZOO portal,
using your Username and Password, sign into Member Services. Then click on 

My Usage will display usage in megabytes (MB), however your usage will be counted
in kilobytes (KB) i.e. 1MB = 1024KB and includes both uploads and downloads.

As mentioned in the 6 Step set-up guide, you can also check your usageat
when using your device.
Your Optus bill will show your actual usage during the billing period.
Optus Email - Webmail
You can check your email online by simply accessing Optus Webmail via the myZOO
Homepage. You can also access Optus Webmail by typing the below web address into the
address eld of your web browser:

Simply enter your  and your  to send and receive email. You
can access this from any Internet connection.

Conguring your email
If you would like to set-up your email program, here are the steps and settings you’ll need:


In Outlook Express, click on the  menu and select .
Click the  and select 
Enter the Display Name you would like to be displayed to others when you send
them an email, then click .
Enter the email address you created when you activated your broadband service,
then click 
On the E-Mail Server Names screen, enter the following settings and click :
a. My incoming mail server is a:
b. Incoming Mail Server: 
c. Outgoing Mail Server: 
In the Internet Mail Logon screen section, enter the following settings and click 
a. Enter your Account Name (your Member Services Username).
b. Enter the Password (your Member Services Password) you specied when you
created the email address.
c. Leave  ticked, 
 un-ticked and click .
Click to complete your mailbox setup.












In Outlook 2003, click on the  menu and select 
Select the  option and click 
Select and click 
Enter your User Information and the following Server Information:
a. Your Name: Enter the Display Name you would like to be displayed to others
b. Email Address: Your full email address you created during signup
c. Incoming mail server (POP3): 
d. Outgoing mail server (SMTP): 
e. Username (your Member Services Username)
f. Password: The Password (your Member Services Password) you created with your
rst email address.
Click next to 
Click  to save the settings and then to exit the Internet Accounts Screen.



In Outlook 2007, click on the  menu and select
Select the  tab option and click 
In the Add New Email Account window, tick Manually congure server settings then click 
Enter your User Information and the following Server Information:
Your Name: Enter the Display Name you would like to be displayed to others when you
send them an email
a. Email Address: Your full email address you created during signup
b. Incoming mail server (POP3): 
c. Outgoing mail server (SMTP): 
d. Username (your Member Services Username)
e. Password (your Member Services Password)
Click to continue.
Clickto save the settings.

















In Windows Mail, click on the  menu and select 
Click the  button.
Select Email Account and click 
Enter a Display Name and click 
Enter your Optusnet email address and click 
Ensure that POP3 is selected in the Incoming email server type eld and enter the
following server details:
a. Incoming mail: (POP3 or IMAP) server: 
b. Outgoing email server: (SMTP) name:  and then click 
Enter your Username (your Member Services Username). Enter your Password (your
Member Services Password) and click .
Click .
Clickto save the settings and access your email



Apple Mail client, click  menu and select  and then  on the
next screen.
On the New Account page, enter the following information:
a. POP, Optusnet, Full Name and Optusnet email address, then click 
Enter the following in the Incoming Mail Server screen:
a. Incoming Mail Server: 
b. Username (your Member Services Username)
c. Password (your Member Services Password), then click 
Leave the default settings and click 
Enter the following Outgoing Mail Server: and click 
Leave the default settings and click 
Conrm that the settings are correct and click 
Click





















Setting up a WiFi Network (WLAN)

 In the address eld on your internet browser, type 
 Type  into the Password box and click on the  button.
 Select  on left side of the menu.

 Select the  icon from Screen.
 Select and Press  Button.



 Wait until the Device has saved the changed value and press 
Button.

You need to set up security and a password to prevent other users using your
broadband when you have your wireless network on.
 In the address field on your internet browser, type 
 Type  into the password box and click on the  button.

 Select the  on left side menu.
 Click on the  Button.



 Click on the  Button (Do not change the “Configure PPP Profile
Settings”).
 In the SSID field enter the name for your wireless network, if you want
to change it from Optus Wireless Broadband. The name you enter will be
visible others.
: Select from the drop down list in the SSID Broadcast field, then
click on the  Button.

 Press 
 To set up your security password change the encryption mode from 
 to  from the drop down menu.



 Enter your chosen password in the box marked 
(must be 8-63 characters or 64 digits) then Press 
• No security means anyone can access your network.
• Please write down your chosen password and keep in a safe place.

WiFi Protected Access (WPA) uses a Pre-Shared Key (PSK) to establish the security
using an 8 to 63 character password. The PSK may also be entered as a 64 character
hexadecimal string.

WPA2 is a primary enhancement over WPA with an inclusion of the AES-CCMP
algorithm as a mandatory feature it has a 8 to 63 character password. Both WPA and
WPA2 support EAP authentication methods using RADIUS servers and preshared key
(PSK) based security.

WEP stands for Wired Equivalency Privacy. WEP protection is better than nothing,
though generally not as secure as the more sophisticated WPA-PSK encryption.

 Press 
 Wait until the Device has saved the changes and press Button.

• Disable your WiFi unless using the WiFi network.
• For advanced Users:
Disable the “SSID Broadcast” after you have connected all your PCs to your Wi-Fi, so
that other people nearby cannot see your WiFi connection
Note: Due to the complexity of numerous computer manufacturers and operating
systems, Optus Customer Service only supports connection via an Ethernet cable to
one computer.