Huawei AP3010DN-AGN Technical specifications

Huawei AP3010DN-AGN Access Points
V200R003C00
Product Description
Issue 01
Date 2013-04-30
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://enterprise.huawei.com
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i

About This Document
Intended Audience
This document describes the positioning, characteristics, hardware structure, product features,
and technical specifications of the AP.
This document helps you understand the characteristics and features of the AP.
This document is intended for:
lNetwork planning engineers
lHardware installation engineers
lCommissioning engineer
lData configuration engineers
lOn-site maintenance engineers
lNetwork monitoring engineers
lSystem maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
DANGER
Indicates a hazard with a high level or medium level of risk
which, if not avoided, could result in death or serious injury.
WARNING
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
CAUTION
Indicates a potentially hazardous situation that, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
TIP
Provides a tip that may help you solve a problem or save time.
NOTE
Provides additional information to emphasize or supplement
important points in the main text.
Huawei AP3010DN-AGN Access Points
Product Description About This Document
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii

Change History
Changes between document issues are cumulative. The latest document issue contains all the
changes made in previous issues.
Changes in Issue 01 (2013-04-30)
This is the initial commercial release.
Huawei AP3010DN-AGN Access Points
Product Description About This Document
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii

Contents
About This Document.....................................................................................................................ii
1 Product Positioning and Characteristics...................................................................................1
1.1 Product Positioning.............................................................................................................................................2
1.2 Product Characteristics.......................................................................................................................................5
2 Hardware Structure.......................................................................................................................8
2.1 AP3010DN-AGN...............................................................................................................................................9
3 Product Features...........................................................................................................................11
3.1 WLAN Features................................................................................................................................................12
3.2 Network Features..............................................................................................................................................12
3.3 QoS Features.....................................................................................................................................................13
3.4 Security Features..............................................................................................................................................13
3.5 Maintenance Features.......................................................................................................................................13
3.6 BYOD...............................................................................................................................................................14
3.7 Locating Service...............................................................................................................................................14
3.8 Spectrum Analysis............................................................................................................................................14
4 Technical Specifications.............................................................................................................15
4.1 Basic Specifications..........................................................................................................................................16
4.2 Radio Specifications.........................................................................................................................................16
4.3 Standards Compliance......................................................................................................................................20
Huawei AP3010DN-AGN Access Points
Product Description Contents
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv

1 Product Positioning and Characteristics
About This Chapter
1.1 Product Positioning
1.2 Product Characteristics
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

1.1 Product Positioning
Table 1-1 Product positioning
Product
Model
Frequency
Band
IEEE Standard
Compliance
Positioning Usage
Scenario
AP3010DN-
AGN
Dual band:
l2.4 GHz
l5 GHz
The
AP3010DN-
AGN can
provide services
simultaneously
on the 2.4 GHz
and 5 GHz
frequency bands
to support more
access users.
IEEE 802.11a/
b/g/n
The
AP3010DN-
AGN is a resold
product
applicable to
small- and
medium-size
businesses
(SMBs). It
supports 2 x 2
MIMO and
provides
comprehensive
service support
capabilities. The
AP3010DN-
AGN is
deployed
indoors and
features high
reliability, high
security, simple
network
deployment,
automatic AC
discovery and
configuration,
and real-time
management
and
maintenance.
The
AP3010DN-
AGN provides
802.11n
wireless
networks for
small and
medium
enterprises and
can be flexibly
deployed.
The AP3010DN-AGN can work as a Fat AP or Fit AP and switch flexibly between the two
working modes based on the network plan.
When the wireless network scale is small, customers need to purchase only AP products and set
the APs to work as Fat APs. As the network scale expands, tens of or hundreds of APs exist on
the network. To simplify network management, customers are advised to purchase ACs to
perform centralized management on the APs and set the APs to work as Fit APs.
Typical networking modes are as follows:
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2

Figure 1-1 Fit AP networking (AP mode)
AP n
AP1
……
NMS
AC
Authentication system
Switch
Management channel between
NMS and AC
Management channel between the
AC and the AP and data channel
Where data flows are
encapsulated with CAPWAP
Channel where data flows are not
encapsulated with CAPWAP
Business
users
Residential
users
STA STA
In this networking, the AP functions as a fit AP and provides only data forwarding functions.
The AC is responsible for user access, AP go-online, AP management, authentication, routing,
security, and QoS.
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

Figure 1-2 Fit AP networking (WDS mode: point-to-point)
Figure 1-3 Fit AP networking (WDS mode: point-to-multipoint)
In this networking, the AP connects two or more independently wired or wireless LANs through
wireless links to construct a network on which users can exchange data. In Wireless Distribution
System (WDS) mode, the AP supports point-to-point (P2P) and point-to-multipoint (P2MP)
networking modes. With 5 GHz and 2.4 GHz frequency bands, the AP can implement wireless
bridging and access functions.
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4

Figure 1-4 Fit AP mesh networking
On the preceding network, mesh routers function as mesh points (MPs) and are fully-meshed to
establish an auto-configured and self-healing wireless mesh network (WMN). Mesh routers with
the gateway function can work as the mesh portal points (MPPs) through which the WMN can
provide access to the Internet. Terminals connect to mesh routers to access the WMN. The WMN
uses dedicated mesh routing protocols to guarantee high transmission quality and is more
applicable to scenarios that require high bandwidth and highly stable Internet connections.
1.2 Product Characteristics
The AP3010DN-AGN has the following advantages on a WLAN.
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5

Product
Characteristics
Description
High-speed and
reliable wireless
access
lComplies with IEEE 802.11a/b/g/n.
lSupports 2 x 2 MIMO and provides a maximum rate of 300 Mbit/s.
lSupports Wi-Fi Multimedia (WMM) and priority mapping on the
air interface and wired interface.
lSupports wired link integrity check.
lSupports load balancing.
lSupports roaming without service interruption in Fit AP mode.
lSupports AC dual-link backup and VRRP hot backup in Fit AP
mode.
lUses the latest 802.11n chip to provide higher performance and
wider coverage.
Comprehensive
user access control
capability
lSupports access control lists (ACLs) and implements user access
control based on the user group policy.
lProvides fine-grained bandwidth management for each user.
lSupports user isolation policies.
lSupports unified authentication on the AC in Fit AP mode.
lIdentifies the device type according to the organizationally unique
identifier (OUI) in the MAC address, user agent (UA) information
in an HTTP packet, and DHCP options in Fit AP mode.
lThe RADIUS server delivers packet forwarding, security, and QoS
policies according to the device type carried in the RADIUS
authentication and accounting packets in Fit AP mode.
High network
security
Supports the following authentication and encryption modes:
lOpen system authentication
lWEP authentication/encryption
lWPA/WPA2-PSK authentication and encryption
lWPA/WPA2-802.1x authentication and encryption
lWAPI authentication and encryption
lSupports wireless intrusion detection system (WIDS), including
rogue AP and STA detection, attack detection, STA/AP blacklist
and whitelist.
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6

Product
Characteristics
Description
Flexible
networking and
environment
adaptability
lProvides flexible networking capabilities and applies to various
application scenarios. Mesh and WDS scenarios are supported only
in Fit AP mode.
lHas strong environment adaptability. The AP can automatically
select the transmission rates, channels, and transmit power to adapt
to various radio environments and avoid interference in real time.
lAdjusts bandwidth allocation based on the user quantity and
environment to improve user experience.
lIdentifies interference sources such as bluetooth devices,
microwave ovens, cordless phones, ZigBees, game controllers, 2.4
GHz/5 GHz wireless video and audio devices, and baby monitors in
Fit AP mode and works with eSight to locate interference sources
and display spectrums.
Easy device
management and
maintenance
lAutomatically goes online and loads the configuration, and supports
plug-and-play (PnP) in Fit AP mode.
lSupports batch upgrade.
lAllows real-time monitoring on the network management system
(NMS) to facilitate remote configuration and fast fault location.
lSupports the Link Layer Discovery Protocol (LLDP) to implement
automatic link discovery and obtain the network topology.
Huawei AP3010DN-AGN Access Points
Product Description 1 Product Positioning and Characteristics
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7

2 Hardware Structure
About This Chapter
2.1 AP3010DN-AGN
Huawei AP3010DN-AGN Access Points
Product Description 2 Hardware Structure
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8

2.1 AP3010DN-AGN
Appearance
Figure 2-1 shows the appearance of the AP.
NOTE
The actual device appearance may be different from the following device appearance, but these differences
will not affect device functions.
Figure 2-1 AP appearance
Interfaces
The following figure shows interfaces on the AP.
Figure 2-2 Interfaces on the AP
As shown in Figure 2-2, the AP has the following interfaces.
1. Console interface.
2. ETH/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and
supports PoE power supply.
3. Default button: restores factory settings if you hold down the button more than 3s.
4. Power input interface: 12 V DC.
5. Lock interface: protects the AP against theft.
NOTE
Only Chinese-style power adapters can be delivered with the APs.
Huawei AP3010DN-AGN Access Points
Product Description 2 Hardware Structure
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

LED Indicators
Inform
ation
Type
Col
or
Statu
s
Description
Default
status
after
power-
on
Gre
en
Stead
y on
lIf the indicator is steady green, the AP is just powered on.
lIf the indicator blinks green, the system enters the Uboot
command line.
Runnin
g status
Gre
en
Blink
ing
once
every
2s
(0.5
Hz)
The system is running properly and the Ethernet connection is
normal. STAs are associated with the AP.
Blink
ing
once
every
5s
(0.2
Hz)
The system is running properly and the Ethernet connection is
normal. No STA is associated with the AP.
Alarm Gre
en
Blink
ing
once
every
0.25s
(4
Hz)
The CAPWAP link is disconnected during an upgrade.
Fault Red Stead
y on
A fault that affects services has occurred, such as a DRAM
detection failure or system software loading failure. The fault
cannot be automatically rectified and must be rectified manually.
Huawei AP3010DN-AGN Access Points
Product Description 2 Hardware Structure
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10

3 Product Features
About This Chapter
3.1 WLAN Features
3.2 Network Features
3.3 QoS Features
3.4 Security Features
3.5 Maintenance Features
3.6 BYOD
3.7 Locating Service
3.8 Spectrum Analysis
Huawei AP3010DN-AGN Access Points
Product Description 3 Product Features
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11

3.1 WLAN Features
WLAN features supported by the AP are as follows:
lAP3010DN-AGN: complies with IEEE 802.11a/b/g/n.
lAP3010DN-AGN: provides a maximum rate of 300 Mbit/s.
lMaximum ratio combining (MRC)
lMaximum-likelihood detection (MLD)
lData unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
lAP3010DN-AGN: supports 802.11 dynamic frequency selection (DFS).
lShort GI in 20 MHz and 40 MHz modes
lPriority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding
lAutomatic and manual rate adjustment (the rate is adjusted automatically by default)
lWLAN channel management and channel rate adjustment
NOTE
For details about WLAN channel management, see the Country Code & Channel Compliance
Table.
lAutomatic channel scanning and interference avoidance
lService set identifier (SSID) hiding
lSignal sustain technology (SST)
lUnscheduled automatic power save delivery (U-APSD)
lControl and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
lAutomatic login in Fit AP mode
lWireless distribution system (WDS) in Fit AP mode
lMesh networking in Fit AP mode
3.2 Network Features
Network features supported by the AP are as follows:
lCompliance with IEEE 802.3u
lAuto-negotiation of the rate and duplex mode and automatic switchover between the Media
Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
lSSID-based VLAN assignment
lVLAN trunk on uplink Ethernet ports
l4094 VLAN IDs (1-4094) and a maximum of 8 virtual APs (VAPs) for each radio
lAP control channel in tagged and untagged mode
lDHCP client, obtaining IP addresses through DHCP
lCentralized data forwarding and local data forwarding
lSTA isolation in the same VLAN
lAccess control lists (ACLs)
Huawei AP3010DN-AGN Access Points
Product Description 3 Product Features
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12

lLink Layer Discovery Protocol (LLDP)
lUninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
lUnified authentication on the AC in Fit AP mode
lAC dual-link backup and VRRP hot backup in Fit AP mode
3.3 QoS Features
QoS features supported by the AP are as follows:
lPriority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding
lWMM parameter management for each radio
lWMM power saving
lPriority mapping for upstream packets and flow-based mapping for downstream packets
lQueue mapping and scheduling
lUser-based bandwidth limiting
lAdaptive bandwidth management (the system dynamically adjusts bandwidth based on the
number of users and radio environment to improve user experience)
3.4 Security Features
Security features supported by the AP are as follows:
lOpen system authentication
lWEP authentication/encryption
lWPA/WPA2-PSK authentication and encryption
lWPA/WPA2-802.1x authentication and encryption
lWAPI authentication and encryption
lSupports wireless intrusion detection system (WIDS), including rogue AP and STA
detection, attack detection, STA/AP blacklist and whitelist.
3.5 Maintenance Features
Maintenance features supported by the AP are as follows:
lUnified management and maintenance on the AC in Fit AP mode
lAutomatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode
lWDS zero-configuration deployment in Fit AP mode
lMesh network zero-configuration deployment in Fit AP mode
lBatch upgrade
lLocal AP management through the serial interface or using Telnet
lReal-time configuration monitoring and fast fault location using the NMS
lSystem status alarm
Huawei AP3010DN-AGN Access Points
Product Description 3 Product Features
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13

3.6 BYOD
NOTE
The AP supports bring your own device (BYOD) only in Fit AP mode.
BYOD features supported by the AP are as follows:
lIdentifies the device type according to the organizationally unique identifier (OUI) in the
MAC address.
lIdentifies the device type according to the user agent (UA) information in an HTTP packet.
lIdentifies the device type according to DHCP options.
lThe RADIUS server delivers packet forwarding, security, and QoS policies according to
the device type carried in the RADIUS authentication and accounting packets.
3.7 Locating Service
NOTE
The AP supports the locating service only in Fit AP mode.
Locating service features supported by the AP are as follows:
lLocates tags manufactured by AeroScout or Ekahau.
lLocates Wi-Fi terminals.
3.8 Spectrum Analysis
NOTE
The AP supports spectrum analysis only in Fit AP mode.
Spectrum analysis features supported by the AP are as follows:
lIdentifies interference sources such as bluetooth devices, microwave ovens, cordless
phones, ZigBees, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and
baby monitors.
lWorks with eSight to locate and perform spectrum analysis on interference sources.
Huawei AP3010DN-AGN Access Points
Product Description 3 Product Features
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14

4 Technical Specifications
About This Chapter
4.1 Basic Specifications
4.2 Radio Specifications
4.3 Standards Compliance
Huawei AP3010DN-AGN Access Points
Product Description 4 Technical Specifications
Issue 01 (2013-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15