HUDSON STEEL BS017 User manual

FUNCTIONAL TRAINER
BS017

10
11

─ 3 ─
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete
physical examination from your physician. When using exercise equipment,
basic precautions should always be taken, including the following:
* Read all instructions before using the equipment. These instructions are
written to ensure your safety and to protect the unit.
* Do not allow children on or near the equipment.
* Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the
manufacturer: such attachments might cause injuries.
* Wear proper exercise clothing and shoes for your workout----no loose
clothing.
* Be careful when getting on or off the equipment.
* Do not overexert yourself or work to exhaustion.
* If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
* Never operate the unit when it has been dropped or damaged.
* Never drop or insert anything into any opening in the equipment.
* Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
* Frayed or worn cables can be dangerous and may cause injury. Periodically
check these cables for any indication of wear.
* Keep hands, limbs, loose clothing and long hair well out of the way of
moving parts.
* Do not attempt to lift more weight than you can control safely.
* Do not use the equipment outdoors.
PERSONAL SAFETY DURING ASSEMBLY
* Read each step in the assembly instructions and follow the steps in
sequence. Do not skip ahead. If you skip ahead, you may learn later that you
have to disassemble components and that you may have damaged the
equipment.
* Assemble and operate the equipment on a solid, level surface. Locate the
unit a few feet from walls or furniture to provide easy access. The
equipment is designed for your enjoyment. By following these precautions
and using common sense, you will have many safe and pleasurable hours
of healthful exercise with the equipment.

Instructions
Tools Required
─ 4 ─
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that all
parts have been included in your shipment. When ordering, use part number
and description from the lists. Use only our replacement part when servicing.
Failure to do so will void your warranty and could result in personal injury.
The equipment is designed to provide the smoothest, most effective exercise
motion possible. After assembly, you should check all functions to ensure
correct operation. If you experience problems, first recheck the assembly
instructions to locate any possible errors made during assembly. If you are
unable to correct the problem, call your authorized dealer. Be sure to have
your serial number and this manual when calling. When all parts have been
accounted for, continue on.
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set

1
2
3
4
5
6
7
8
9
10
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
29
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
51
53
52
54
56
56
55
57
58
59
60
60
60
60
61 62
63
64
64
64
65
66
66
66
66
51
67
67
67

Item No. Description Qty Item No. Description Qty
1 Right Stand 1 19 Short handle 1
2 Left Stand 1 20 Long Lat Strap 2
3 Right Guide Bar 1 21 TricepsRope 1
4 Left Guide Bar 1 22 Foot Lat Strap 1
5 Right Slip Frame 1 23 Lat Strap 2
6 Left Slip Frame 1 24 Shaft For Pulley Bracket 2
7 Cross Brace 1 25 Cable Assembly 2
8 Hook Cross Brace 1 27 Plastic Tube Guide 4
9 Transverse beam 1 28 Big pulley 6
10 Dual Pulley Bracket 2 29 Small pulley 10
11 Guide bar 4 30 Grip 2
12 Pop Pin 2 31 Rubber Plug 4
13 support frame 4 32 L Hook sleeve 5
14 Pulley connecing frame 2 33 Aluminum Cap φ25 2
15 Shroud 2 34 Aluminum Ring φ25 2
16 L-shaped plate 2 35 Spacer 4
17 Long handle 1 36 Plug 2
18 Short pull handle assembly 1 37 Foot Cove 4

Item No. Description Qty Item No. Description Qty
38 Bumper 2 53 Hex Bolts M8*95 2
39 Mount Sleeve 4 54 Socket Head Cap Bolts M8*30 4
40 Weight Bumper 4 55 Hex Bolts M8*20 4
41 Nylon Bumper 4 56 Hex Bolts M8*15 6
42 Nylon Spacer 4 57 Button Head Cap Screw M6*12 4
43 Six angle flange nut M12 4 58 Flat Head Cap Screw M6*15 2
44 Gourd hook φ8 2 59 Socket Set Screw M5*3 4
45 Weight Plate 30 60 Nylon lock Nut M10 28
46 Top Plate 2 61 Nylon lock Nut M8 2
47 Selector Pin W/Coil 2 62 Hex Thin Nut M6 4
48 Hex Bolts M10*115 2 63 Spring Washer φ10 12
49 Hex Bolts M10*95 4 64 Spring Washer φ8 14
50 Hex Bolts M10*55 4 65 Arc washers φ10.5*φ21*1.8 4
51 Hex Bolts M10*50 18 66 Washer φ11*φ20*2 64
52 Hex Bolts M10*25 12 67 Washer φ9*φ16*1.5 36

STEP 1
1
2
7
8
9
52
63
66
Item No. Description Qty Item No. Description Qty
1 Right Stand 1 9 Transverse beam 1
2 Left Stand 1 52 Hex Bolts M10*25 12
7 Cross Brace 1 63 Spring Washer φ10 12
8 Hook Cross Brace 1 66 Washer φ11*φ20*2 64

STEP 2
Item No. Description Qty Item No. Description Qty
1 Right Stand 1 55 Hex Bolts M8*20 4
2 Left Stand 1 56 Hex Bolts M8*15 6
15 Shroud 2 64 Spring Washer φ8 10
16 L-shaped plate 2 67 Washer φ9*φ16*1.5 10
1
2
46
15
56
64
67
16
55
64
67

STEP 3
17
18
19
20
21
22
23
Item No. Description Qty Item No. Description Qty
17 Long handle 1 21 TricepsRope 1
18 Short pull handle assembly 1 22 Foot Lat Strap 1
19 Short handle 1 23 Lat Strap 2
20 Long Lat Strap 2

10

11