HUDSON STEEL BS018 User manual

HALF RACK
BS018

11
14
15

Important Safety Instructions
Before beginning any fitness program, you should obtain a complete
physical examination from your physician. When using exercise equipment,
basic precautions should always be taken, including the following:
* Read all instructions before using the equipment. These instructions are
written to ensure your safety and to protect the unit.
* Do not allow children on or near the equipment.
* Use the equipment only for its intended purpose as described in this guide.
Do not use accessory attachments that are not recommended by the
manufacturer: such attachments might cause injuries.
* Wear proper exercise clothing and shoes for your workout----no loose
clothing.
* Be careful when getting on or off the equipment.
* Do not overexert yourself or work to exhaustion.
* If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
* Never operate the unit when it has been dropped or damaged.
* Never drop or insert anything into any opening in the equipment.
* Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
* Frayed or worn cables can be dangerous and may cause injury. Periodically
check these cables for any indication of wear.
* Keep hands, limbs, loose clothing and long hair well out of the way of
moving parts.
* Do not attempt to lift more weight than you can control safely.
* Do not use the equipment outdoors.
PERSONAL SAFETY DURING ASSEMBLY
* Read each step in the assembly instructions and follow the steps in
sequence. Do not skip ahead. If you skip ahead, you may learn later that you
have to disassemble components and that you may have damaged the
equipment.
* Assemble and operate the equipment on a solid, level surface. Locate the
unit a few feet from walls or furniture to provide easy access. The
equipment is designed for your enjoyment. By following these precautions
and using common sense, you will have many safe and pleasurable hours
of healthful exercise with the equipment.
─ ─
3

Instructions
Tools Required
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that all
parts have been included in your shipment. When ordering, use part number
and description from the lists. Use only our replacement part when servicing.
Failure to do so will void your warranty and could result in personal injury.
The equipment is designed to provide the smoothest, most effective exercise
motion possible. After assembly, you should check all functions to ensure
correct operation. If you experience problems, first recheck the assembly
instructions to locate any possible errors made during assembly. If you are
unable to correct the problem, call your authorized dealer. Be sure to have
your serial number and this manual when calling. When all parts have been
accounted for, continue on.
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set
─ ─
4

overall
1
2
3
4
5
5
6
6
7
8
9
11
10
12
12
14
15
13
13
17
17
18 18
17
18
19 20
21
22
23
25
24
16
ITEM NO. DESCRIPTION QTY ITEM NO. DESCRIPTION QTY
1Base FrameⅠASSY 114 Battery Base ASSY 1
2Base FrameⅡASSY 115 Bumper 6
3Front Standing FrameⅠ 116 Hex Head Bolt M12*110 4
4Front Standing FrameⅡ 117 Hex Head Bolt M12*105 8
5Bottom Cross Frame 218 Hex Head Bolt M12*100 20
6Rear Upright Frame ASSY 219 Hex Head Bolt M12*30 8
7Lat Bar 120 Hex Head Bolt M10*30 2
8CarriageⅠASSY 121 Nylon Lock Nut M12 32
9CarriageⅡASSY 122 Flat Washer φ13*φ24*1.5 72
10 Weight HookⅠASSY 123 Flat Washer φ11*φ20*2 2
11 Weight HookⅡASSY 124 Spring Washer φ12 8
12 Rear Weight Storage ASSY 625 Spring Washer φ10 2
13 Strap Hook ASSY 2
─ ─
5

Base FrameⅠASSY
1
2
3
ITEM NO. DESCRIPTION QTY
1Base FrameⅠ 1
2Rubber Foot 2
3Bushing φ60*φ51.5*63.5 1
Base FrameⅡASSY
1
2
3
ITEM NO. DESCRIPTION QTY
1Base FrameⅡ 1
2Rubber Foot 2
3Bushing φ60*φ51.5*63.5 1
─ ─
6

Rear UUpright Frame ASSY
1
2
ITEM NO. DESCRIPTION QTY
1Rear Upright Frame 1
2Plug □50.8*76.2 1
1
2
RearWeightStorageASSY
ITEM NO. DESCRIPTION QTY
1Rear Weight Storage 1
2Plug φ48 1
─ ─
7

CarriageⅠASSY
CarriageⅡASSY
1
4
2
3
7
6
8
5
9
10
ITEM NO. DESCRIPTION QTY
1CarriageⅠ 1
2Plastic PlateⅠ 1
3Plastic PlateⅡ 1
4 Long Plastic Plate 1
5 Aluminum Ring φ25 1
6 Aluminum Cap φ25 1
7 Grip φ30*φ22*95 1
8 Button Head Cap Screw M6*16 1
9 Flat Head Cap Screw M6*12 11
10 Socket Set Screw M5*3 2
ITEM NO. DESCRIPTION QTY
1CarriageⅡ 1
2Plastic PlateⅠ 1
3Plastic PlateⅡ 1
4 Long Plastic Plate 1
5 Aluminum Ring φ25 1
6 Aluminum Cap φ25 1
7 Grip φ30*φ22*95 1
8 Button Head Cap Screw M6*16 1
9 Flat Head Cap Screw M6*12 11
10 Socket Set Screw M5*3 2
1
4
3
25
76
8
9
10
─ ─
8

WeightHookⅠASSY
WeightHookⅡASSY
1
2
6
7
4
5
3
9
12
13
8
11
ITEM NO. DESCRIPTION QTY
1Weight HookⅠ 1
2 Hook 1
3 Aluminum Cap φ25 1
4 Grip φ30*φ22*95 1
5 Aluminum Ring φ25 1
6Plastic PlateⅠ 1
7Plastic PlateⅡ 1
8 Hex Head Bolt M8*55 1
9 Button Head Cap Screw M6*16 1
10 Flat Head Cap Screw M6*12 8
11 Socket Set Screw M5*3 2
12 Nylon Lock Nut M8 1
13 Flat Washer φ9*φ16*1.6 2
1
2
3
4
8
13 7
6
5
9
11
10
12
ITEM NO. DESCRIPTION QTY
1Weight HookⅡ 1
2 Hook 1
3Plastic PlateⅠ 1
4Plastic PlateⅡ 1
5 Aluminum Cap φ25 1
6 Grip φ30*φ22*95 1
7 Aluminum Ring φ25 1
8 Hex Head Bolt M8*55 1
9 Button Head Cap Screw M6*16 1
10 Flat Head Cap Screw M6*12 8
11 Socket Set Screw M5*3 2
12 Nylon Lock Nut M8 1
13 Flat Washer φ9*φ16*1.6 2
─ ─
9

StrapHook ASSY
Battery BaseASSY
12
3
5
4
ITEM NO. DESCRIPTION QTY
1 Strap Hook 1
2 Sleeve φ30*φ20*91 3
3 End Cover 3
4 Hex Head Bolt M10*25 3
5 Flat Washer φ11*φ20*2 3
1
2
3
6
5
8
7
4
9
ITEM NO. DESCRIPTION QTY
1 Fixing Frame 1
2 Rotating Frame 1
3 Turret Mounting Bracket 1
4Bronze Bearing φ38*φ25.4*18 4
5 Pivot φ25.4*102 2
6 Adjusting Handle 1
7 Hex Head Bolt M10*30 4
8 Flat Washer φ11*φ20*2 4
9 Spring Washer φ10 4
10

Assembly
STEP 1
ITEM NO. DESCRIPTION QTY ITEM NO. DESCRIPTION QTY
1Base FrameⅠASSY 1 16 Hex Head Bolt M12*110 4
2Base FrameⅡASSY 1 17 Hex Head Bolt M12*105 8
3Front Standing FrameⅠ 1 18 Hex Head Bolt M12*100 8
4Front Standing FrameⅡ 1 19 Hex Head Bolt M12*30 8
5 Bottom Cross Frame 2 21 Nylon Lock Nut M12 20
6 Rear Upright Frame ASSY 2 22 Flat Washer φ13*φ24*1.5 48
7 Lat Bar 1 24 Spring Washer φ12 8
13 Strap Hook ASSY 2
1
2
3
4
5
5
6
6
7
13
13
18
16
17
19
22
21
24
11

Assembly
STEP 2
ITEM NO. DESCRIPTION QTY ITEM NO. DESCRIPTION QTY
8CarriageⅠASSY 1 10 Weight HookⅠASSY 1
9CarriageⅡASSY 1 11 Weight HookⅡASSY 1
10
8
11
9
12

Assembly
STEP 2
ITEM NO. DESCRIPTION QTY ITEM NO. DESCRIPTION QTY
12 Rear Weight Storage ASSY 6 21 Nylon Lock Nut M12 12
14 Battery Base ASSY 1 22 Flat Washer φ13*φ24*1.5 24
15 Bumper 6 23 Flat Washer φ11*φ20*2 2
18 Hex Head Bolt M12*100 12 25 Spring Washer φ10 2
20 Hex Head Bolt M10*30 2
12
15
14
20
23
25
18
22
21
13

14

15