HULALA HOME HZSTVS0249 User manual

NOTE:
ITEM NO. HZSTVS0249
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
provide a record of their order such as the order number, or
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
Are you having difficulty
with assembly? Missing parts?
PLEASE DON’T RETURN THE ITEM TO
RETAILER
For help call or email with your order No.
Customer service:
888-214-6610
Open Monday through Friday
9:00AM-5:00PM CST
Email:
[e-mail]
24h

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or
polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
To obtain the longest lifespan of your outdoor
products, avoid exposure to rain or snow, and
direct sunshine for long time. Whenever
possible cover the product and/or place under
patio or awnings.
Not for commercial use, For residential use
only.
Weight Limitation Estimated Duration Of Assembly
120LBS 25
-
30 MINUTES
PARTS
LIST
1: X1
6: X1
9: X1
2: X1 4: X2
3: X1
7: X2
5: X1 8: X1
18: X1
17: X2
14: X3
11: X3 12: X3
10: X3 13: X3
15: X1 16: X1

HARDWARE
LIST ASSEMBLY
INSTRUCTIONS
SPARE
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
23: X4
21: X3 21: X3
20: X1
19: X3 22: X36
24: X40 24: X40 25: X40 26: X12
28: X34
27: X4
29: X4 29: X4 29: X4
22: X2
21: X2 24: X2 24: X2
25: X2 26: X2 27: X2 28: X2
6
STEP 1: Fasten cam bolt #24 and put on wood dowel #28 on
bottom of fixed shelf 6, then carefully insert the cam bolt
and dowel through holes on edge of the partition panel #4,
attach cam nut #24 and fasten to secure.
4
4
6
24
24
25
28
28
24

4
4
6
2
3
STEP 2: Fasten cam bolt #24 and put on wood dowel
#28 along bottom edge of end panel #2/#3, then
carefully insert the cam bolt and dowel through
holes on end of fixed shelf #6, attach cam nut #24
and fasten to secure.
24
28
24
25
5
4
4
6
2
3
STEP 3: Insert lower back #5 through channel on end panel
#2/#3 and top panel #1.

24
28
25
24
1
24
28
1
4
4
6
2
3
1
4
4
2
3
6
7
7
8
STEP 5: Fasten cam bolt #24 and put on wood dowel
#28 on top of fixed shelf #6, then carefully insert the
cam bolt and dowel through holes on end of partition
panel #7, attach cam nut #24 and fasten to secure.
Insert upper back 8 through channel on end panel #2/#3
24
28
25
24
STEP 4: Fasten cam bolt #24 and put on wood dowel #28
on bottom of top panel #1 , then carefully insert the cam
bolt and dowel through holes on end of end panel #2/#3 and
partition panel #4, attach cam nut #24 and fasten to secure.

22
19
3
6
4
1
4
2
7
7
19
STEP 6: Take off the male slides from female slides by
press the clip as shown, Use screw #22 to attach the female
slides to end panel #2/#3 and partition panel #7.
9
24
9
28
STEP 7: Fasten cam bolt #24 and put on wood dowel #28 on
top of bottom panel #9.

4
41
3
2
67
7
9
24
28
25
24
STEP 8: Carefully insert the cam bolt and
dowel through holes on end of end panel #2/#3
and partition panel #7, attach cam nut #24 and
fasten to secure.
STEP 9:Use bolt, spring washer, flat washer #29
to attach legs to apron of bottom panel 9, fasten
bolts and center legs #16 to secure.
1
4
4
2
3
6
16
9
15
15
15
15
7
7
29

11
12
13
10
28
28
11
12
13
10
14
21
STEP 10: Put wood dowel #28 on end of drawer back,
Use screw #26 to connect drawer sides #11/#12 and
drawer back. Insert drawer bottom #13 through lower
channel along drawer sides and drawer back. Fasten cam
bolt #24 and put on wood dowel #28 on backside of drawer
front #14 , then carefully insert the cam bolt and dowel
through holes on end of drawer sides #11/#12, attach
cam nut #24 and fasten to secure. Use bolt #21 to attach
STEP 11: Use screw #22 to attach drawer sides #19
on drawer sides #11/#12.
22
19
knob #21 on drawer fronts.

17
17
19
STEP 13: Push back the pin on top edge of the door
#17 then insert the door to sliding channel
STEP 12: Carefully align male and femal drawer slides
then insert drawers gradually.

STEP 15:Release the pin by press the button on back
side of the door to hold the door on track. Insert the shelf
pin #23 to shelf pin hole on partition panel then place the
adjustable shelf on desired level. Tipping kits #20 are
required to install in order to prevent potential risk of the
whole cabinet tip over.
STEP 14: Use screw 27 to secure back panel on rear edge
of partition panel, be careful to make sure the angle of
screw stay straight and prevent damage to partition panels.
20
23
27
27