Human Touch PC-420 User manual

ENG FRC ESN
use & care manual mode d’emploi et d’entretien manual de uso y cuidado
Register your product ONLINE Today
www.humantouch.com/register
Register your product ONLINE Today
www.humantouch.com/register
©2016 Human Touch®, LLC. Patents pending and intellectual property rights enforced.
No medical claims are warranted or implied by the use of this product.
Human Touch is a trademark of Human Touch®, LLC.
PC-420-NA-A0
humantouch.com
Perfect Chair®
800.355.2762
use & care manual
pc420
classic manual plus

ENGLISH
humantouch.com
You have just purchased one of the finest pieces of ergonomic furniture available.
The Human Touch®Perfect Chair®artfully blends the best of aesthetics,
technology and wellness in a seating experience that transcends the highest
standards of comfort.
The recline system eases the body into a virtually weightless position, as it
elevates the legs above the heart and relieves weight from the spine. This
remarkable chair relieves the soreness, tension and fatigue caused by the
earth’s constant pulling, while its fixed-form seating position ensures maximum
ergonomic posture at all recline angles.
To ensure that you don’t overlook any of your chair’s features, and that you use it
safely, read this manual carefully. Then sit back, relax, and enjoy!
welcome to human touch®
humantouch.com
keep it safe
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
• Donotsitonthechairarms.
• Thechairisintendedforstationaryuse,notforrocking.
• Alwaysreclineslowlytomaintainoptimalcontrolofthesuspensionsystem.
• Keepngersandlooseclothingawayfromtheguiderailsatalltimes.
• Thisproductisnotdesignedforusebydisabledpeopleorchildrenwithoutadultsupervision.
• Ifyouhavechronicbackpain,haveundergonebacksurgery,orhaveanyquestionsaboutusingthisproduct,
consult your physician before use.
• Ifyouexperiencedizzinessornausea,discontinueuseandcontactyourphysicianimmediately.
Do not attempt to repair this product yourself.
• This product is designed for personal in-home use. Commercial use will void warranty.
When using this product, basic precautions should always be followed, including
the following:
Pleasesendanyquestionsorcommentsregardingthismanualto[email protected]
Register your product at www.humantouch.com to ensure your product is
in our system to simplify the warranty process should you ever need it.
pc420
classic manual plus

3
humantouch.com 23
get ready
UNPACK THE BOXES
Body pad
Arm cap (2)
Head pad Head pillow
Phillips-head
screwdriver
Screw (6)
ENGLISH
Your Human Touch®Perfect Chair®requires some simple assembly. Just attach
the headrest/footrest frame, pads, arm caps, and head pillow, and you’re done!
Chair frame Headrest frame
Head sock
Footrest frame
INSTALLING THE FOOTREST FRAME
Slide the two ends of the footrest frame into the holes in the
front of the chair frame.
2. Slide the footrest frame onto the chair frame.
Using the Phillips-head screwdriver (provided), remove the two
screws from the footrest frame. Retain them for use in step 3.
1. Remove the footrest frame screws.
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame.
2. Secure the body pad.
Using a Phillips-head screwdriver and the two provided screws,
secure each side of the footrest frame to the chair frame.
3. Replace the footrest frame screws.
Using both hands, continue to pull the seat canvas all the way
forward to cover the footrest frame, then secure the two front
and two side flaps, using the hook and loop fasteners.
5. Finish securing the canvas to the frame.
Using both hands, gently pull the seat canvas forward just to
the top of the footrest frame, then secure the two flaps located
underneath the canvas to the footrest frame.
4. Attach the canvas to the footrest frame.

5
ENGLISH
humantouch.com 4
Arm cap
get ready
ATTACH THE ARM CAPS
Remove the three screws taped to the underside of the right-hand
arm cap, then place the right-hand arm cap on top of the armrest.
From the underside of the armrest, secure the arm cap using the
three screws. Repeat these steps to attach the left-hand arm cap.
Slide the head sock over the headrest frame, as far as it
will go. The padded side of the head sock should face
the back of the chair.
ATTACH THE HEAD PAD
1. Slide the head sock over the headrest frame.
Slide the head pad over the head frame, ensuring that the frame
slides into the fabric pocket located on the bottom side of the
pad. Pull the head pad down as far as it will go.
2. Slide the head pad over the head frame.
From the front of the chair, tuck the flap on the top of the body pad
up into the head pad and smooth it flat. The flap is automatically
secured to the pad, using the hook and loop fasteners.
3. Tuck in the body pad flap.
Attach the head pillow straps to the head pad straps using
the hook and loop fasteners. Adjust the head pillow height for
maximum comfort.
4. Attach the head pillow.
1. Raise the chair to an upright position.
ATTACH THE HEADREST FRAME
For your convenience, and to better position the chair for the remaining assembly,
use the recline lever to adjust the chair to an upright position.
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
2. Remove the headrest frame screws.
3. Insert the headrest frame into the backrest frame.
4. Replace the headrest frame screws.
With the arc of the headrest frame pointing toward the back of the chair, slide
the two ends of the headrest frame into the open tube ends at the top of the
backrest frame.

7
ENGLISH
humantouch.com 6
take a seat
Using your Human Touch Perfect Chair is easy. Just take a seat and
adjust the chair to the desired position. The Perfect Chair cradles you
in zero-gravity comfort, with your feet above your heart—the ultimate
neutral-posture position for back and spine relief.
To recline, gently pull up on the recline lever, lean back on the backrest to adjust it to the desired angle, then
release the lever. To incline to a more upright position, gently pull up on the recline lever, then pull up on
the armrests with your hands while applying slight downward pressure with your elbows, until the backrest
inclines to the desired position. Release the recline lever.
Adjust the recline angle
NOTE: Lean back against the backrest before reclining the chair.
Adjust the headrest
While seated, reach up with both hands and grasp both sides of the head-
rest. You will feel the rigid frame beneath the soft head pad. Grasping the
rigid frame, tilt the headrest forward or backward for maximum comfort.
The headrest remains in this position until you adjust it again.
When adjusting the footrest up and down, you may notice a slight bumping sensation.
This is caused by the footrest locking mechanism, and is perfectly normal.
Body pad
Adjusting lumbar support
1. To decrease lumbar support, sit in the chair, lean against the
backrest, then push the ball valve on the back of the body pad.
When the lumbar support reaches the desired thickness, release
the valve.
2. To increase lumbar support, lean forward to remove pressure
from the pad, then push the ball valve inward. When the lumbar
 supportreachesthedesiredthickness,releasethevalve.Ittakes
approximately ten seconds for the lumbar support to fully inflate.
LUMBAR SUPPORT PERFORMANCE NOTES
• You must remove all body weight from the pad when increasing lumbar support.
• Ifthelumbarsupporthasbeencompressedforalongperiodoftime,itmaytakeuptooneminutetorestoreitto
its full thickness.
• The colder the pad is, the longer it takes to react to lumbar support changes.
• Should the ball valve leak during use, push the black ball in and, with a cotton swab, apply a small amount of Vaseline
 insidethevalve.NOTE:Itisnormalforthelumbarsupporttoreturntoafullyexpandedstateovertime.
• Keepsharpobjectsawayfromthepad.Thepadcontainsaprecisionair-tightbladderwhichthatwillnotfunctionproperly
if punctured.

9
ENGLISH
humantouch.com 8
Chairsize(reclined): 62”Lx31”Wx30”H
Product weight: 71 Lbs.
Requiredreclineclearance: 9”
Maximum load weight: 400 Lbs.
*Specifications are subject to change without prior notice.
Specifications*
To keep your product working and looking its best, please follow
these simple care guidelines.
care and maintenance
WARNING:
1. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does
not fade prior to using the solution on the entire product surface.
2. Donotusebenzene,thinneroranyothersolventsonyourproduct.
Cleaning Code Standard: W
TomaintainyourHumanTouchproductinoptimumcondition,dustitfrequentlyand/orvacuumitwithasoftbrushvacuum
extension.Ifyourproductbecomesdirty,useawater-basedupholsterycleaneronly.Totreatstains,spotcleanwithan
upholstery shampoo or a mild detergent foam.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication
 orservicingisrequired.
2. Yourchairshouldonlybeservicedbyanauthorizedservicecenter.
Use and Storage Environment:
1. When not in use for a long period of time, we recommend that the chair be covered and the unit be placed in an
environment free of dust and moisture.
2.Donotstorenearheatoropenflame.
3.Donotleavethisproductexposedtodirectsunlightforlongperiodsoftime.Thismaycausefadingordamage.
4.Donotuseorstoreinextremetemperatures;productstoredincoldtemperaturesmayrequire48hoursatroom
temperature to function properly.
5.Productshouldbeusedandstoredinanenvironmentwithnon-condensinghumidityrangingfrom10to80%;
excessive humidity will damage the mechanics.

FRANÇAIS
Perfect Chair®
mode d’emploi et
d’entretien
www.humantouch.com/register
Enregistrez votre produit EN LIGNE dès maintenant
www.humantouch.com/register
Enregistrez votre produit EN LIGNE dès maintenant
humantouch.com
800.355.2762
soyez à votre meilleur. sentez-vous à votre meilleur.
MC
pc420
classic manual plus

FRANÇAIS
humantouch.com
Vousvenezd’acheterundesmeilleursmeublesergonomiquesquisoit.LeHuman
TouchMD Perfect ChairMDoffreuneexpérienceassisequiallielemeilleurde
l’esthétique,delatechnologieetdubien-être,transcendantlesnormeslesplus
élevées en matière de confort.
Le système d’inclinaison met le corps en état d’apesanteur virtuel, élevant les
jambes au-dessus du cœur et libérant la colonne vertébrale de tout son poids. Ce
fauteuilremarquablesoulagedeladouleur,destensionsetdelafatiguecausées
parlaforcedegravitéterrestre,tandisquelapositiondusiègefixegarantitune
postureergonomiqueoptimale,soustouslesanglesd’inclinaison.
Afindebénéficierdupleinpotentieldetouteslescaractéristiquesdevotrefauteuil,
etafindevousassurerquevousenfaitesunusagesécuritaire,lisezceguide
attentivement.Celafait,asseyez-vous,détendez-vous,etprofitezduvoyage!
bienvenuechezhuman touchMD
humantouch.com
Veuillezacheminertoutequestionoucommentaireconcernantcemanuelà:[email protected]
©2014 Human TouchMD, LLC. Brevets en instance. Tous droits réservés.
Aucunegarantiequantauxbénéficesmédicauxdecetappareiln’estofferte,qu’ellesoitexpresseouimplicite.
HumanTouchestunemarquedecommercedeHumanTouchMC, LLC.
• Nevousassoyezpassurlesaccoudoirsdufauteuil.
• Lefauteuilestdestinéàl’usagexeetnedoitpasserviràsebercer.
• Inclinez-voustoujourslentementandepréserverleconfortoptimaldusystèmedesuspension.
• Gardezentoustempslesdoigtsetlesvêtementsloindesrailsdeguidage.
• Ceproduitn’estpasconçupourêtreemployéparlespersonneshandicapéesoulesenfantssanslasurveillanced’unadulte.
• Demandezl’avisdevotremédecinavantd’utiliserceproduitsivoussouffrezdedouleurschroniquesaudos,
 sivousavezsubiunechirurgieaudosousivousavezdesquestionsconcernantl’utilisationdeceproduit.
• Sivousressentezdesétourdissementsoudesnausées,cessezl’utilisationduproduitetvoyezimmédiatementvotremédecin.
consignes de sécurité
CONSIGNES DE SÉCURITÉ IMPORTANTES
Lorsque vous utilisez cet appareil, vous devez toujours suivre les précautions de base suivantes :
CONSERVEZ CE MODE D’EMPLOI
Ne réparez pas ce fauteuil vous-même.
• Cefauteuilestconçupourunusagepersonnelaufoyer.Toutusageàdesnscommercialesannulera
la garantie.
pc420
classic manual plus

FRANÇAIS
15
humantouch.com 14
préparez-vous
Coussin du
corps
Coussin
d’accoudoir (2)
Coussind’appui-tête Oreiller nucal
Vis (4)
Tournevis
àtête
cruciforme
Glissezlecoussinducorpssurlapartieinférieuredubâtidu
fauteuilenvousassurantquelebâtiglissedanslapochede
matériel située sur le bas du coussin.
Lissezenplacelecoussindecorps,durepose-piedsjusqu’au
dossier.Lecoussinestautomatiquementfixéaumoyendes
attaches fermeture.
FIXEZ LE COUSSIN CORPOREL
1. Glissez le coussin corporel dans la structure du fauteuil.
2. Fixez le coussin corporel.
Glissezlesdeuxextrémitésdelastructuredurepose-pied
danslesorificessituésàl’avantdelastructuredufauteuil.
2. Glissez la structure du repose-pied dans la
structure du fauteuil.
Àl’aided’untournevisàtêtecruciforme,fixezchaquecôtéde
lastructuredurepose-piedàlastructuredel’appui-tête,en
vissant les deux vis fournies.
3. Remettez en place les vis de la structure
du repose-pied.
Desdeuxmains,continuezàtirerlecanevasdusiègevers
l’avant,desortequ’ilcouvrelastructuredurepose-pied.Fixez-y
ensuitelesdeuxrabatsavantetlatérauxàl’aidedesbandesde
ruban autoagrippant.
5. Complétez en fixant le canevas à la structure.
Retirezlesdeuxvisdelastructuredurepose-piedàl’aidedu
tournevisàtêtecruciformefourni.Conservez-lespourl’étape3.
1. Retirez les vis de la structure du repose-pied.
Desdeuxmains,tirezdoucementversl’avantlecanevasdu
siège,jusquesurledessusdelastructuredurepose-pied.
Fixez-yensuitelesdeuxrabatssituéssouslecanevas.
4. Attachez le canevas à la structure du repose-pied.
INSTALLATION DE LA STRUCTURE
DU REPOSE-PIED
Bâtidufauteuil Cadredel’appui-tête
Bonnet
Structure du
repose-pied
DÉBALLEZ LES BOÎTES
Votre fauteuil de massage Human Touch Perfect Chair nécessite un
assemblage tout simple. Fixez tout simplement la structure de l’appui-tête
et du repose-pied, les coussins, les accoudoirs et l’oreiller – et voilà!

FRANÇAIS
17
humantouch.com 16
Retirezlestroisviscolléessouslecoussindel’accoudoirdroit.
Placezensuitelecoussindel’accoudoirdroitsurledessus
del’accoudoir.Dudessousdel’accoudoir,fixezlecoussinà
l’aidedestroisvis.Répétezcesétapespourfixerlecoussinde
l’accoudoir gauche.
FIXEZ LES COUSSINS D’ACCOUDOIR
Glissezjusqu’auboutl’enveloppedel’appui-têtesurlebâtide
l’appui-tête.
FIXEZ LE COUSSIN DE L’APPUI-TÊTE
1. Glissez le bonnet sur la structure de l’appui-tête.
Glissezlecoussinpar-dessuslastructuredel’appui-tête,enveillantàce
quelastructureglissedanslapochetteentissusituéesousl’oreiller.
Tirezlecoussindel’appui-têteverslebas,aussiloinquepossible.
2. Glissez le coussin de l’appui-tête dans la structure
de l’appui-tête.
Del’avantdufauteuil,ramenezlerabatsurledessusducoussinde
corps,jusqu’aucoussindel’appui-tête.Lissez-lebien.Lapatteest
automatiquementfixéesurlecoussinaumoyendesattachesfermeture.
3. Ramenez le rabat du coussin corporel vers l’intérieur.
Attachezlessanglesdel’oreilleraucoussindel’appui-têteàl’aidedes
bandesderubanautoagrippant.Ajustezlahauteurdel’oreillerafin
d’obtenir la position la plus confortable.
4. Fixez l’oreiller.
préparez-vous
1. Élevez le fauteuil en position verticale.
FIXEZ LA STRUCTURE DE L’APPUI-TÊTE
Par commodité, et pour mieux placer le fauteuil pour le restant de l’assemblage,
mettez-leenpositionverticaleàl’aidedulevierd’inclinaison.
Retirezlesdeuxvisdelastructuredel’appui-têteàl’aidedu
tournevisàtêtecruciformefourni.Conservez-lespourl’étape4.
L’arceauducadredel’appui-têtedirigéversl’arrière,glissezlesdeuxextrémités
ducorpsdel’appui-têtedanslesorificesdudessusducadredudossier.
Àl’aided’untournevisàtêtecruciforme,remettezlesdeuxvisde
lastructuredel’appui-tête,enlafixantàlastructuredudossier.
2. Retirez les vis de la structure de l’appui-tête.
3. Insérez la structure de l’appui-tête dans la structure du dossier.
4. Revissez les vis de la structure de l’appui-tête.
Silecadredel’appui-têteestinstalléàl’envers,lesorificesdesvisducadre
del’appui-têteneserontpasalignéssurceuxducadredudossier.
Coussin d’accoudoir