Human Touch SUPER NOVO 2.0 User manual

Super Novo 2.0
Remote Control User Guide
MENU — Displays the main menu.
QUICK ADJUST KEY SETTINGS — Use
navigation ring to adjust:
Massage speed
Cloud Touch intensity
Underfoot roller speed
Massage width
3D Back massage intensity
LEGS EXTEND — Press and hold
to extend the footrest.
TIME REMAINING — Shows the
total amount of time remaining
in the current massage session.
MASSAGE AREA — Illustrates
the areas currently being
massaged.
BACK — Press and hold to recline
or incline the backrest.
CLOUD — When the status screen is
displayed, press to adjust the Cloud
Touch intensity. The selected intensity
displays in the upper left-hand corner
of the screen.
ZeroG®— Press to automatically
position the chair in zero gravity,
raising your feet above your heart for
maximum spine relief. When in ZeroG,
the icon on the display screen
lights blue.
PROGRAMS — Displays the Auto
Programs menu. When an auto
program is running, press to toggle
among the other auto programs. The
active program displays at the top of
the status screen.
POWER / PAUSE / RESTORE —
• Powers On the remote.
• Pauses all massage function.
• Select RESUME to continue the massage.
•Select POWER OFF to restore, returning
the chair to the upright position.
LEGS — Press and hold to raise or lower
the footrest.
LEGS RETRACT — Press and hold to
retract the footrest.
HEAT — Press to toggle the heat On and
Off. When the heat is On, the heat icon
on the screen lights red.
POSITION — Use to move the massage
rollers to the desired position after the
AcuPoint®Body Sensing scan, if needed,
and when enjoying a Zone or Spot
massage.
NAVIGATION RING — Use to navigate the
screens; press the center circle button to
select an option,
RANGE — Indicates the vertical
massage range:
MASSAGE MODE — Indicates the active
robotic massage technique.
BLUETOOTH — Lights blue when
Bluetooth is set to On.
PROGRAM NAME — Indicates
the active massage program.
For more detailed operation instructions,
please see the Use and Care Manual.
- Full
- Zone
- Spot

FAST-ACCESS CONTROLS
PERFORM KEY FUNCTIONS EFFORTLESSLY
QUICK PRESS — powers ON the chair/remote
QUICK DOUBLE PRESS — starts default auto program
LONG PRESS THEN RELEASE — restores the chair
Press the volume button, then rotate the outer silver
knob to adjust the speaker volume
Press to pause / resume all
massage functions
Press to toggle heat ON and OFF
ROTATE CLOCKWISE SLIGHTLY — stepped incline
ROTATE COUNTER-CLOCKWISE SLIGHTLY — stepped recline

5’11” > taller
5’8” – 5’10”
5’3” – 5’7”
5’0” – 5’2”
8 – 9
6 – 7
3 – 5
1 – 2
Overall Height Shoulder Setting
Shoulder Height Guide
Remote Control User Guide
For more detailed operation instructions,
please see the Use and Care Manual.
The default setting for AcuPoint(R) Body Sensing is AUTO.
If using MANUAL, refer to guide below.