Humanscale NeatCharge WE9012C-X User manual

North America: [phone]
Europe: [phone]
Asia Pacic: [phone]
ASSEMBLY INSTRUCTIONS
English........................2
French.........................9

2
Included Parts
Tools Required
Charger AC Adapter Locator Magnets Charging Location
Sticker
Locator Template Double-Sided
Adhesive Sticker
Pencil Drill with #2 Philips
Head Driver Bit
Cable Clips Mounting Screws

3
NOTE
STEP 1:
STEP 2:
Charger does not work at close range.The work
surface thickness must be at least 15mm (0.6”)
and no more than 30mm (1.2”).
Choose a charging location on the desk, making
sure there is space beneath for the charger.
Clean and dry the surface before placing the
charging location sticker. Remove adhesive
backing and place the charging location sticker
on work surface in the desired location.
Place a stack of 2 included magnets on the
power symbol in the center of the location
sticker.

4
STEP 4:
Center the locator template on the lower magnet and
hold the template against the work surface, making
sure to not move the magnet.
STEP 3:
Beneath the work surface, use the third magnet
to nd the location of the upper magnets.
When they are aligned, adjust the position to
make sure the upper magnets are still centered
on the sticker.
STEP 5:
Using a pencil, trace around the edge of the template,
then remove the template and magnets.

5
STEP 6:
Align the charger with the pencil marks. The
small indicator LED should face the front and
the power socket should face the rear. Ensure
that the “THIS SIDE UP” faces upwards.
Attach the charger to the work surface with
the included screws.
NOTE: If mounting to a surface that cannot be screwed
into, such as glass, use the included double-sided
adhesive sticker to mount the charger. Clean and dry
both surfaces and remove the “THIS SIDE UP” sticker
before adhering. Do not use the screws in addition to
the adhesive.
Using the adhesive mount reduces the maximum
charging distance to 28mm (1.1”).

6
LED Behavior
• Power on: green light ashes 2 times
• Charging: green light ashing (1 second intervals)
• Abnormal / Error / FOD (Foreign Object Detection):
red light ashing (0.5 seconds intervals) until the
Foreign Object is removed or the device is power
cycled.
STEP 7:
Plug in power cable and AC adapter. If needed, cable
clips can be used to manage the power cable.

7
Product Name: NeatCharge
Model #:WE9012C-X
Input: 100-240VAC 50/60Hz 24V 1A
Max Wireless Output Power 10W
Charging Distance: 15mm to 30mm (0.6”-1.2”)
Qi compatible devices
Weight: 7.94 ounces (225g)
Operating Temperature: 32°F to 95°F (0°C to 35°C), humidity 10 to 90%
Storage Temperature: -4°F to 176°F (-20°C to 80°C), humidity 5 to 95%
FCC ID: 2AYH2-WE9012C
IC: 26837-WE9012C
CAUTION
• Remove all objects from the charging area before charging compatible mobiles, including phone cases, pop sockets,
coins, keys, rings, staples, paper clips, RFID cards, credit cards, and any other metal objects. Metal objects on or near
the charging area may become hot and cause burns.
• Be sure the surface is clear of dust and other debris before charging.
• Wireless charging is temperature sensitive. Do not use the Product outside of its operating temperature range and do
not store the Product outside of its storage temperature. Do not keep the Product in high-temperature environments,
including intense sunlight or other forms of heat. Keep product away from res and open ames.
• Do not disassemble the Product or attempt to re-purpose or modify it in any manner.
• If the Product is intended by Purchaser to be used by a minor, purchasing adult agrees to provide detailed instructions
and warnings to any minor prior to use. Failure to do so is sole responsibility of Purchaser, who agrees to indemnify
Humanscale for any unintended use/misuse by a minor.
• Product is intended for home, ofce and general indoor use only. Do not use near medical or industrial equipment or on
board an aircraft
• This product contains magnets. KEEP THIS PRODUCT AWAY FROM CHILDREN. SEEK IMMEDIATE MEDICAL
ATTENTION IF A MAGNET IS SWALLOWED OR INHALED.
• DO NOT USE THIS PRODUCT IF YOU HAVE A PACEMAKER OR IMPLANTED MEDICAL DEVICE. Wireless charging can
affect the operation of an implanted peacemaker or other medical devices.
Product Information

8
FCC Statement
This device complies with Part 15 and Part 18 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.
CAN ICES-003(B)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s): RSS-216, RSS-102, and SPR-002 at 0cm. Operation is subject to the
following two conditions: (1)This device may not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Changes or modications to this device not expressly approved by Humanscale may void the user’s authority to operate
this equipment.
Humanscale Corporation
1114 6th Ave. 15th Floor
NewYork, NY 10036
www.humanscale.com
For our terms and conditions please go to
https://www.humanscale.com/about/legal-information/terms-conditions.cfm
© 2020 Humanscale Corporation. The text and artwork are copyrighted materials. All rights reserved. The
Humanscale mark and logo are trademarks of Humanscale Corporation and are registered in the United States
and certain other countries.
Product Information (continued)

9
Amérique du Nord: +1800400-0625
Europe: + 353(0)1858-0910
Asie pacique: + 8522581-0570
INSTRUCTIONS D’ASSEMBLAGE

10
Pièces incluses
Outils nécessaires
Chargeur Adaptateur
d'alimentation
Aimants de
positionnement
Autocollant de
positionnement
du chargeur
Gabarit de
positionnement
Autocollant
double face
Crayon Perceuse avec embout
cruciforme no2
Attaches-câbles Vis de montage