Humanware SmartView Graduate User manual

Getting Started
SmartView Graduate

This document will show you how to install the software and assemble
the SmartView. A list of commands is also included to help you get the
most out of your SmartView's many features.
CAUTION: Do not connect the SmartView to your computer before
installing the Graduate Setup software.
1. Contents of the Package
• Camera
• Base plate
• Arm
• Two USB cables
• One controller cable
• CD-ROM
• Camera Case
• Getting started guide
• Warranty card

2. Assembling SmartView Graduate

3. Installing Graduate Setup Software
Insert the installation CD into the CD-ROM drive and follow the
instructions.
If the installation procedure does not begin automatically, use Windows
Explorer to find on your CD a file called Setup.exe. Double click this file
to launch installation.
Click Next to continue
Read the License agreement and click Next if you agree with the terms.

Click Next to continue installation at the default location.
If you wish to select a different installation location, click Change.
Select the Shortcut folder of your choice and click Next.

Review your installation information. If the information appears valid,
click Next. If you need to make modifications, click Back and return to
previous windows to make changes.
A window will inform you that the necessary files have been installed.
Press OK.

A window will inform you that the installation was successful. You may
now plug in the two USB cables that connect the SmartView to you
computer. Press Finish to end software installation. The computer will
now attempt to install the hardware drivers.
If the device drivers have not already been installed, you will have to
instruct Windows on how to install these drivers.
Select Locate and install driver software.

Select Yes, always search online or Yes, search online this time
only. Note that an internet connection is required.
Your computer will look for the appropriate drivers on the internet.

This window will appear to inform you that the hardware drivers have
been successfully installed on your computer. You may now launch
your SmartView Graduate by double-clicking the desktop icon.

4. Using the SmartView Graduate
Adjust the camera angle to capture on your computer screen what you
want to see. Position the lens in front of the camera to view material
placed on the Base plate. The following commands can be used to
modify or save the resulting image.
(*) Push < and > together to return to default brightness and contrast.
(**) Choices are: black & white, negative, normal, enhanced
(***) Choices are: yellow, green, blue
Function
Zoom In / Zoom Out
Rotate Image 90 degrees
Brightness adjustment (*)
Contrast adjustment (*)
Restart / Freeze camera
Toggle color (**)
Toggle false colors (***)
Open save file dialog
Quick image save
Serial number and version
Key
+ / -
F6
< / >
CTRL + < / >
Space
F3
CTRL + C
CTRL + S
CTRL + SHIFT + S
CTRL + F1
Alternate Key
R
C