Humanware GTM9100P10012 User manual

User Guide

iii
SmartView Synergy SI
User Guide
By HumanWare
Version 9-20110401

iv
SmartView Synergy SI User Guide
Copyright 2011 by HumanWare Limited, all rights
reserved. No part of this publication may be reproduced
or distributed in any form or by any means, or stored in
a database or retrieval system, without the prior
written permission of HumanWare Limited.
Every effort has been made to ensure that the
information contained in this publication is correct at
the time of issue. Neither HumanWare Limited, nor its
agents, assume any responsibility for errors or
omissions. Nor is any liability assumed for damages
resulting from the use of the information contained
herein.
About HumanWare
HumanWare (http://www.humanware.com) is the
global leader in assistive technologies for the print
disabled. HumanWare creates products for people who
are blind, have low vision and/or have learning
disabilities. The innovative range of HumanWare
products includes BrailleNote, the leading productivity
device for the blind in education and business, as well
as for personal use; the Victor Reader line, the world's
leading digital audiobook players; myReader2,
HumanWare’s unique "auto-reader" for people with low
vision and SmartView Synergy SI.

v
Important Safety Instructions
Follow all warnings, cautions, and instructions marked
on the product.
Carefully read the instructions described in this user
guide prior to using the SmartView Synergy SI.
Only use or store the SmartView Synergy SI on stable
and solid surfaces.
Keep away from water or high humidity. Do not
submerge.
Only use cables provided with the SmartView Synergy
SI.
The power supply cord is a disconnect device for
pluggable equipment. The socket-outlet should be
installed near the equipment, and be easily accessible.
This product should be operated from the type of power
indicated on the marking label. If you are not sure of
the type of power available, consult your dealer or local
power company.
Refer all servicing of this product to qualified service
personnel. Do not attempt to service it yourself, as

vi
opening or removing covers may expose you to
dangerous voltage points or other risks.
The above exclamation point within an equilateral
triangle is intended to inform the user to the presence
of important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
The appliance is not to be used by children or persons
with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction.

vii
The above LED light warning label is intended to inform
the user to the presence of a Class 2 LED product. The
LED light warning label is placed on the bottom side of
the plastic head of the base unit, as shown in the
drawing below. The user must not stare at the Class 2
LED light sources that are located on the bottom side of
the plastic head; Class 2 LED light sources are the two
white lights.

viii
Caution

ix
Susceptibility to Interference
There may be temporary degradation of the image
when the SmartView Synergy SI is subjected to a
strong radio-frequency field, electro-static discharge or
transient electrical noise. An electro-static discharge
(caused by static electricity) may cause the screen to
go blank. If this happens, switch the unit off and on
again.
Medical Compliance Warnings
This product is equipped with a 3-wire grounding type
plug as a safety feature. This plug has a third
(grounding) pin and can only be plugged into a
grounding-type power outlet. If necessary, contact an

x
electrician to replace your power outlet with a
grounding-type power outlet.
This product should be operated with the external
power supply indicated on the marking label to ensure
compliance with the requirements of IEC 60601-1. The
external power supply must be of the following
manufacturer and model:
Manufacturer: GlobTek, Inc.
Model Number: GTM9100P10012
Electromagnetic compatibility: The use of accessories
and cables other than those specified by HumanWare
may result in increased emissions or decreased
immunity of the SmartView Synergy SI.
Placement of equipment: The SmartView Synergy SI
should not be used adjacent to or stacked with other
equipment.
FCC Warning
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This

xi
equipment generates and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Notice for Canada.
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
regulations.

xii
Table of Contents
1Overview of SmartView Synergy SI .......................... 1
1.1 Introduction ......................................................... 1
1.2 Unpacking the system.......................................... 1
1.3 Configuration ....................................................... 1
1.4 Assembly .............................................................2
1.5 Physical description of SmartView Synergy SI .....6
1.5.1 SmartView Synergy SI .....................................6
1.5.2 Rear panel.....................................................7
1.5.3 Using the Reading Table................................7
1.5.4 Adjusting the LCD Screen ............................. 8
2Control panel and buttons. ...................................... 8
2.1 Description of control panel buttons....................9
2.1.1 Power button...................................................9
2.1.2 Enhanced contrast mode button....................9
2.1.3 Color mode button....................................... 10

xiii
2.1.4 Page Locator ................................................11
2.1.5 Zoom knob ...................................................11
2.1.6 Line and Blinds............................................ 12
2.1.7 Brightness knob .......................................... 12
3Main Menu ............................................................. 13
3.1 Navigating the menu ......................................... 13
3.2 Using Sliders ................................................... 14
3.3 Main menu items ............................................. 15
4Maintenance and Troubleshooting.......................... 17
4.1 Maintenance ...................................................... 17
4.2 Troubleshooting............................................... 17
5Returning for Service .............................................22
6Disposal..................................................................22
7Technical Specifications .........................................22
8Manufacturer Warranty ..........................................24
9Customer support...................................................25

1
1Overview of SmartView Synergy SI
1.1 Introduction
SmartView Synergy SI is an electronic desktop
magnifier that enlarges text, objects and actions to
help restore and maintain independence for people
with macular degeneration, diabetic retinopathy or
other low vision eye conditions.
1.2 Unpacking the system
The package contains the following items:
Synergy SI Base unit
LCD screen
Control panel
Power supply (AC power cable and Universal
power supply)
User Guide
Getting Started Guide
Tutorial DVD
1.3 Configuration
The SmartView Synergy SI has an integrated 22" LCD
screen and a fixed Control panel. A remote control
panel is optional.
Note: The Remote control panel is attached to the base
of the unit by a cable. The Fixed control panel is
attached to the integrated LCD screen. All features of
the control panel are also found on the remote control
panel.

2
1.4 Assembly
1- Remove Base unit from the box by holding the
bottom of the base.
2- Remove LCD screen from the box.
3- Position the LCD screen on the top of the arm and
slide it carefully.

3
4- Push the bottom edge of the LCD screen so that it
sits firmly on the metal bracket.
5- Locate the plastic hook on top of the arm and push
the hook toward the screen to ensure that it locks
into place.

4
6- Remove the metal locking pin holding the arm in
position. The LCD can now be freely moved up and
down. For safekeeping, insert the metal locking pin
in the clip located on the back side of the screen.
You may need the locking pin if you plan on
shipping your unit.
7- Connect the video and power cables to the LCD.
8- Connect the power supply and power cord.

5
Note: The unit may come pre-assembled.
Warning: Do not lift the unit by the arm. Only lift by
holding the bottom of the base.

6
1.5 Physical description of SmartView Synergy SI
1.5.1SmartView Synergy SI
1- LCD Screen
2- Front Control Panel
3- Camera and Page Locator Light
4-Table Lock
5- Reading Table
6-Rear Panel

7
1.5.2 Rear panel
1- Power connector
2- USB maintenance port
3- Remote control panel connector
1.5.3 Using the Reading Table
Use the Reading Table to move the items you wish to
magnify. To read a text, move the table towards you
and locate the beginning of the sentence. As you
continue reading, move the table to the left to follow
the sentence. To change lines, move the table to the
right and slightly away from you.
The Reading table is equipped with a Table Lock. It is
located in the center of the front edge of the table.
This feature allows you to set the resistance of the
Reading table. To increase the resistance of the
Reading Table, move the slider to the right. The more
you push the slider to the right, the more difficult it
will be to move the Reading Table. This will provide
you with more control and will decrease the chances of