Hunter Products BBH-1588 User manual

Important Warning!
Age: 3 Years +
Maximum user
weight :30Kg
1. Not Suitable for children under 36 months. Choking hazard due to
small parts
2. For family and domestic use only
3. Not to be used in traffic
4. Adult assembly required
5. Warning! Protective equipment should be worn
6. This toy has no brake
7.
8. This toy contains batteries that are non-replaceable
This toy is unsuitable for children under 3 years due to its
maximum speed.
Model No.: BBH-1588
Item No.: E8096
Please keep this manual for future reference as it contains important information.
Before first time use, charge the battery for at least 8-12 hours, no more than 20 hours.

Below 40OC
Avoid to use under
burning sun
DC 12V 4.5 AH *1
Input: 100-240V,
50-60Hz 0.2A
3+ years
Under 30Kg
PP
Suitable age:
Load Capacity:
Material:
Charger:
Battery:
Optimum
Temperature:
Charging time:
Fuse:
Output: 15V 500mA
8-12 hours,
at most 20 hours
F 6A,Self-resetting
-1-

-2-
Rearvie
w
mirror
2
+2
Placed
vehicle
body
Charger 1
Left&
Right
+M5 Nut
MP3
Line 1
M4X12
&
M4X16
screw
4
Stuck
on the
wheel
Installe
d on
the car
body
22
14

Parts list
PART
NAME PICTURE Qty
(pcs)
REMA
RKS
PART
NAME
PICTURE Qty
(pcs)
REMA
RKS
PART
NO
PART
ON
15 16
17
18
19
20
Plastic
wrenc
h
2
Door
decora
tion
hold-all
1
pair
Left&
right
Wheel
core
cover
4
1
1
back
(of a
chair)
ejector
1
3

-4-

-5-
Turn the car upside down
Load a drive wheel on the rear axle
Load a 10 # gasket on the rear shaft
Tighten 8 nuts with a plastic wrench
Add a plastic core cover
Turn the car upside down
Load a 12 # gasket on the front axle
Load a front wheel on the front axle
Load a 10 # gasket on the rear shaft
Tighten 8 nuts with a plastic wrench
Add a plastic core cover
Note: the installation method of the left and
right front wheels is the same.
Note: the installation method of left and right
drive wheels is the same

-6-
4Seat &back (of a chair)
Place the backrest clip on the car body and fix it with 2pcs M4X12mm screws
Place the seat on the car body and fix it with 2pcs M4X12mm screws
【Remarks：Dock the docking plug before installing the seat】【Refer to page 7】

5.Install the windshield
Press the windshield into the body until installed.
6. Install the steering wheel
Connect the music plug-INS on the orientation disk to the music plug-INS next to the direction
bar, then place the plug-INS in the hole below the direction bar;
Insert the steering wheel into the end of the direction bar;
Alignment of the hole on the steering wheel with the hole on the direction bar and insertion of
the M5 X 40 unit screw;
-7-

-8-
7.Install door decoration and toolbox
Remove the 3pcs M4X20mm screws from the door;
Distinguish the door decoration from the left and right, clip it on the
door separately, and fix it with 3pcs M4X20mm screws;
Configure the tool box card at the back of the car body;

8.Install the rear view mirror
9 .Turn on the power plug
Dock the docking plug before installing the seat
Note: power plugs cannot be operated in reverse
Battery Safety Warning
Non-rechargeable batteries can not be recharged;
Batteries can only be recharged under adult supervision;
Rechargeable batteries should be removed from toys before charging; Different types of
batteries or old and new batteries can not be combined; The battery should be placed in the
correct polarity;
Exhaust batteries should be removed from toys;
Power terminals must not short-circuit
Dry batteries are not available
-9-