Hutt W8 User manual

WINDOW CLEANING ROBOT
ATTACH THE CLEANING PAD
FILL IN CLEANING AGENT
CONNECT TO THE POWER
ATTACH THE SAFETY ROPE
NOTE & CAUTION
START CLEANING
QUICK START GUIDE






Attach a clean pad to the device. Make sure it is
smooth and tight.
Connect the adapter and the power plug as
shown in the sequence below. Finally, insert the
plug into the power socket.
Note: For heavily soiled windows, it is recom-
mended to spray some window cleaner on the
window before use. Replace the cleaning pad in
time once it gets dirty, and run the device the
second pass with the water spray off to remove
streaks, if any.
Caution!
Do not leave the device on the window longer
than necessary to avoid damage. Be sure to hold
the device tightly when you turn it off to avoid
accidental dropping.
When the cleaning process is finished, the device
returns to the starting point by itself.
Grasp the device and press the power button for 3
seconds until the device turns off.
Remove the unit from the glass, check the degree of
soiling of the pad and wheels, and clean them if
necessary before further use. Top up with water if
necessary.
To start the cleaning process, place the device in the
center of the window.
Press and hold the power button for 3 seconds to
turn on the device. Check that the device is securely
attached to the glass.
Briefly press the power button again to start the
cleaning process.
The safety rope is intended for use at high-rise
windows. Check the rope for damage before use.
Then attach it to a solid object.
Improper connection can
cause damage to the device.
Caution!
Open the pot of the water tank, fill in an appro-
priate amount of pure water or special glass
cleaner. If necessary, use the enclosed filling aid.
Close the water tank tightly again.
Press and hold
the power button for
more than 1 second

WINDOW CLEANING ROBOT
Applicable Scenes
Q&A
Works on vertical smooth surfaces such as rectangular/ square windows, shower
glass or marble walls. Works on minimum window size 16in x 24in with a cord length
of 19ft, best working length16ft. Extension cord is available by contacting a customer
specialist.
After-sales Service
[email protected]
Thank you for choosing HUTT products!
If you have any questions regarding using your W8, please contact our support team,
our friendly customer specialist will be more than happy to assist you.
www.huttwisdom.com
Beijing · China
1.Product Warranty
30 days free return & replacement
12 months warranty and free after-sales service
Contact us if you need an extended warranty period
Contact us for easy return and replacement services. We will have you covered even if
your purchase exceeds the warranty period.
If you wish to be a HUTT brand product trial officer, you may contact us for the latest
new product trail plan.
2.Return & Replacement
3.New product trial
Scenes Not Applicable
Not applicable to arched, triangular, and other irregular windows;
Not applicable to horizontal surfaces such as floor, kitchen islands, desks etc.
Choices of Cleaners
Pure water, plain water, diluted white vinegar, diluted glass cleaner are recommended.
Use with Caution, It May Cause An Accidental Fall
Be cautious to use on windows with a thin frame lower than 6mm
Be cautious to use on windows with a sloping frame
Be cautious to use on glue-edged windows
Be cautious to use on tinted / textured windows
To Avoid Accidental Droppings
1.Avoid using the robot on non-applicable surfaces mentioned above.
2.Fix the safety rope well when using the robot on high-rise windows.
3.When working on exterior windows, place warning sign under the operating surface.
4.If you are not sure whether the robot is applicable to your windows, place protective
pads underneath is necessary.
To Avoid Skidding On The Glass
1.Replace the dirty pads in time
2.Clean the crawling wheels in need
3.Avoid over wetting the windows manually
Maintenance
1.After each use, empty the water tank before storage.
2.After each use, wash the dirty pads, keep them flat and let dry.
3.After each use, clean the crawling wheels with a wet wipe manually.
4.Charge the robot every other month if not use for a long time.