Hybrid+ HMH 4.1 User manual
User Manual
Please read the instructions carefully before use
2
TABLE OF CONTENTS
1.
S
af
ety
I
nst
r
uctions
..................................................................................................... 2
2. Technical Specifications
...........................................................................................4
3. How To Control The Unit
.......................................................................................5
4. Trouble shooting
........................................................................................................9
5. Fixture Cleaning
...................................................................................................... 10
statement
The product has well capability and intact packing when leave
factory. All of the user should comply with warning item and manual, any
misuse cause of the damages are not included in our guarantee, and
also can not be responsible for any malfunction & problem owing to
ignore the manual.
1.
S
af
ety
I
nst
r
uctions
Please keep this User Guide for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using
the unit.
Before operating, ensure that the voltage and frequency of power
supply match the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order
to avoid electric shock.
11
10
5. Fixture Cleaning
Th
e
clean
ing
o
f
inter
na
l
a
nd
ex
ter
na
l
optica
l
lens
es
a
nd/or
m
ir
r
ors
m
u
s
t
b
e
c
a
rr
ied
ou
t
p
eriodica
lly to optim
iz
e
ligh
t
ou
tput
.
Cle
a
nin
g
f
r
eq
uency
d
e
p
end
s
on
t
h
e
environm
ent
in
w
hich
t
h
e
f
ixture
ope
r
a
tes
:
d
a
m
p
,
s
m
oky o
r
p
a
r
tic
ula
r
ly
d
ir
ty
s
urr
ound
ing
c
a
n
c
a
us
e
g
r
eat
er acc
um
ula
tio
n
of
d
ir
t
on
th
e
u
nit’
s optics
.
Cle
a
n
with
s
oft
clo
th
u
s
ing
no
r
m
a
l
g
l
a
ss
clea
ni
ng
fluid
.
A
lw
a
y
s
d
r
y
th
e
parts
ca
r
ef
ully
.
Cle
a
n
th
e
ex
ter
na
l
optic
s
a
t
leas
t
ev
ery
20
days. Cle
a
n
th
e
in
ter
na
l
opti
cs
a
t
lea
s
t
ev
ery
30/60
days.
3
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at
least 50cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while operating as
it is fire hazard.
Use safety cable when fixes this unit. DO NOT handle the unit by taking its head
only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the
temperature is higher than this Unit surface temperature may reach up to 85℃.
DO NOT touch the housing bare-hand during its operation. Turn off the power
and allow about 15 minutes for the unit to cool down before replacing or serving.
In the event of serious operating problem, stop using the unit
immediately.Never try to repair the unit by yourself. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type
spare parts.
DO NOT touch any wire during operation as high voltage might be causing
electric shock.
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to
rain or moisture.
DO NOT open the unit within five minutes after switching off.
4
The housing, the lenses, or the ultraviolet filter must be replaced
if they are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing
or attempt any repairs yourself. In the unlikely event your unit may require
service, please contact your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating.
And make sure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit’s weight. Also always use a
safety cable that can hold 12 times of the weight of the unit when installing the
fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people and has no one pass by or under it.
2. Technical Specifications
Light Sources: 1*10wRGBW +4*10wRGBW CREE
Power Consumption: 50W
Power Voltage: 220-240 Vac / 50-60 Hz
Packing Dimension: 30*21*26.5cm
Gross Weight: 3.3Kgs
Control
DMX Channel: 15/19CH
Control Modes: DMX
9
s
o
m
e
s
ug
g
es
tion
s
fo
r
ea
s
y
tr
ou
b
leshooting
:
A.
The
un
it
does
no
t
work
, no
li
ght
a
n
d
t
he
f
a
n
d
o
es
no
t
w
o
r
k
1.
Ch
eck
th
e
c
on
nect
ion of
p
owe
r
a
nd
m
a
in
fu
s
e
.
2.
M
eas
ure
th
e
m
a
ins
volt
a
g
e
on
th
e
m
a
i
n
co
nn
e
ct
o
r
.
3.
Ch
eck
th
e
pow
er
on
LED
.
B.
N
o
t
responding
t
o
D
MX
c
on
t
ro
ll
er
1.
D
M
X
LED
s
h
ou
ld
b
e
on.
If
no
t,
che
ck
D
M
X
co
n
nectors,
ca
b
l
es
to
s
ee
if
link
p
r
ope
r
ly
.
2.
If th
e
D
M
X
LE
D
i
s
on
a
nd no
r
espons
e
t
o
th
e
c
h
a
nn
el,
che
ck
th
e
a
dd
r
ess
s
etti
ng
s a
nd
D
M
X
p
ol
a
r
ity
.
3.
If
y
ou
h
a
ve
i
nter
m
ittent D
M
X
s
ig
n
a
l
p
r
oble
m
s
,
che
ck
th
e
p
ins
on
c
onn
ecto
r
s
or
on
PCB
of
th
e
u
nit
or
the
p
r
ev
iou
s
on
e.
4.
Tr
y
to
us
e
a
no
th
er
D
M
X
co
ntroller
.
5.
Ch
eck
if
th
e
D
M
X
ca
b
le
s
r
un
ne
a
r
or run
a
lon
g
s
id
e
t
o
h
ig
h
volta
g
e
c
a
b
les
th
a
t
m
a
y
c
a
us
e
d
a
m
a
g
e
or
in
terfer
ence
to D
M
X
inter
face
circui
t.
C
. One
of
the
cha
nn
el
s
is
no
t
w
o
r
k
ing
w
el
l
1.
Th
e
s
tep
p
er
moto
r
m
ig
h
t
b
e
dam
a
g
ed
or
the
c
a
b
le
c
on
nect
ed
to th
e PCB
is
b
r
oken.
2.
Th
e
m
oto
r
’
s
d
r
ive
IC
on
th
e
PCB
m
ig
h
t
b
e
o
ut
of
co
ndition.
8
to fast
6Pan/Tilt motor
speed From fast to slow 0----255
7 Dimmer 0-100% 0----255
8 Strobe Null 0----15
Strobe from slow to fast 16----255
9 R1 0-100% 0----255
10 G1 0-100% 0----255
11 B1 0-100% 0----255
12 W1 0-100% 0----255
13 R2 0-100% 0----255
14 G2 0-100% 0----255
15 B2 0-100% 0----255
16 W2 0-100% 0----255
17 Effect 0----255
18 Effect speed From fast to slow 0----255
19 Reset Null 0----127
Reset 128----255
4. Trouble shooting
F
ollo
w
ing
a
r
e
a
few
c
o
mm
on
p
r
oble
m
s
th
a
t
m
a
y occu
r
d
uring
ope
r
a
tion
. He
r
e
a
r
e
5
Pan/Tilt
Pan/Tilt: 540°/ Infinite rotation
Pan/Tilt Resolution: 8bit
Construction
Display: LED Display
Data In/Out socket: 3-pin XLR sockets
Protection Rating: IP20
3. How To Control The Unit
1. Detailed function:
[dXXX]
Setting DMX address
DMX channel set
Setting DMX channel mode among
19CHS/15CHS
[SLoU]
Setting slow auto running mode
[FASt]
Setting fast auto running mode
[StUn]
Setting sound control
Setting sound control
[PAn]
Setting Pan
6
[rPAn]
Setting Pan reverse
[tiL]
Setting Tilt
[rtiL]
Setting Tilt reverse
[diS]
Display forward setting menu
[rdiS]
Display reverse setting menu
[Reset]
Reset
[LoAd]
Restore factory setting
DMX 15 channel
1
Pan
Pan rotation
0----255
2
Pan fine
Pan fine adjustment
0----255
3
Tilt
Tilt rotation
0----255
4
Tilt fine
Tilt fine adjustment
0----255
5
Tilt unlimited
rotation
Null
0----9
anti-clockwise rotate
from slow to fast
10-132
clockwise turn from slow
133----255
7
to fast
6
Pan/Tilt motor
speed
From slow to fast
0----255
7
Dimmer
0-100%
0----255
8
Strobe
Null
0----15
Strobe from slow to fast
16----255
9
Red Dimmer
0-100%
0----255
10
Green Dimmer
0-100%
``
11
Blue Dimmer
0-100%
0----255
12
White Dimmer
0-100%
0----255
13
Effect
0----255
14
Effect speed
From fast to slow
0----255
15
Reset
Null
0----127
Reset
128----255
DMX 19 channel
1
Pan
Pan rotation
0----255
2
Pan fine
Pan fine adjustment
0----255
3
Tilt
Tilt rotation
0----255
4
Tilt fine
Tilt fine adjustment
0----255
5
Tilt unlimited
rotation
Null
0----9
anti-clockwise rotate
from slow to fast
10----132
clockwise turn from slow
133----255
12
Table of contents
Other Hybrid+ Lighting Equipment manuals
