HyperX Cloud Stinger User manual

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 1 of 9
HyperX Cloud Stinger Core Headset
Part Numbers:
HX-HSCSC-BK

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 2 of 9
TABLE OF CONTENTS
Overview ..................................................................................................................................3
In-line audio control operation..................................................................................................4
Usage (PS4™ & PS4™ Pro)....................................................................................................5
Usage (Xbox One™)................................................................................................................6
Usage (Nintendo Switch™)......................................................................................................7
Usage (mobile device) .............................................................................................................8
Headset Specifications.............................................................................................................9

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 3 of 9
Overview
A. Headband adjustment slider
B. Rotating noise cancellation mic
C. In-line audio control

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 4 of 9
In-line audio control operation
The in-line audio control contains a volume wheel to adjust the headphone output volume and
a microphone mute slider to mute the microphone.
To increase the headset volume, rotate the volume wheel clockwise (towards the + sign). To
reduce the volume, rotate the volume wheel anticlockwise (towards the – sign).
To mute the microphone, slide the microphone mute button to the down position. To activate
the microphone, slide the microphone mute button to the up position.
Microphone
Active
Microphone
Mute
Headphone
Volume

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 5 of 9
Usage (PS4™ & PS4™ Pro)
To use the headset with PlayStation™4 (PS4™), connect the 3.5mm plug on the headset
directly to the PS4™game controller and follow these steps:
1. Turn on your PS4™game console.
2. Navigate to the ‘Settings’ menu and select it.
3. Highlight the ‘Devices’ menu option and select it.
4. Scroll down to ‘Audio Devices’ and select it.
5. Choose ‘Output to Headphones’ and select ‘All Audio’’.
Using with PS4™

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 6 of 9
Usage (Xbox One™)
To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the
3.5mm jack on the Xbox™One controller
*If your Xbox One™controller does not have a 3.5mm jack, you will need the Xbox One™Stereo
Headset adapter (sold separately) that plugs into the Xbox One™controller (pictured below).
Using with Xbox One™
*

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 7 of 9
Usage (Nintendo Switch™)
To use the headset with Nintendo Switch™, connect the 3.5mm plug on the headset directly to
the 3.5mm jack on the Nintendo Switch™.
Using with Nintendo Switch™

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 8 of 9
Usage (mobile device)
To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA),
connect the 3.5mm plug directly into the headset jack on your device.
Using with mobile device (phone, tablet or notebook)

Document No. 480HX-HSCSC001.A01
HyperX Cloud Stinger Core Headset
Page 9 of 9
Headset Specifications
Headphone
Driver: Dynamic, 40mm with neodymium magnets
Type: Circumaural, closed back
Frequency response: 20Hz-20,000Hz
Impedance: 16 Ω
Sound pressure level: 99dBSPL/mW at 1kHz
THD: < 2%
Weight: 215g
Cable length and type: Headset (1.3m)
Connection: Headset - 3.5mm plug (4 pole)
Microphone
Element: Electret condenser microphone
Polar pattern: Noise-cancelling
Frequency response: 50Hz-18,000 Hz
Sensitivity: -41.5dBV (0dB=1V/Pa,1kHz)