I-Tech DKP-115 Series User manual

Console user ’ s manual
2
SAFETY INSTRUCTIONS
1. Please read these safety instructions carefully.
2. Please keep this User’s Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or
sprayed detergent for cleaning. Use moisture sheet or clothe for cleaning.
4. For pluggable equipment, the socked-outlet shall be installed near the equipment and shall
be easily accessible.
5. Please keep this equipment from humidity.
6. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
7. Do not leave this equipment in an environment unconditioned, storage temperature above
600C, it may damage the equipment.
8. The opening on the enclosure is for air convection hence the equipment from overheating.
DO NOT COVER THE OPENING.
9. Make sure the voltage of the power source connect the equipment to the power outlet.
10. Please keep the power cord such a way that people can not step on it. Do not place anything
over power cord. The power cord must rate for the voltage and current marked on the
product’s electrical ratings label. The voltage and current rating of the cord should be
greater than the voltage and the current rating marked on the product.
11. All cautions and warning on the equipment should be noted.
12. If the equipment is not in use for long time, disconnect the equipment from mains to avoid
being damaged by transient over-voltage.
13. Never pour any liquid into ventilation openings; this could cause fire or electrical shock.
14. Never open the equipment. For safety reason, qualified service personnel should only
open the equipment.
15. If one of the following situations arises, get the equipment checked by service personnel.
zThe Power Cord or plug is damaged.
zLiquid has penetrated into the equipment.
zThe equipment has been exposed to moisture.
zThe equipment has not worked well or you can not get it work according to User’s
Manual.
zThe equipment has dropped and damaged.
zIf the equipment has obvious signs or breakage.

Console user ’ s manual
4
4.6 Product Details....................................................................................................32
4.7 Hardware Installation ........................................................................................... 32
4.8 Usage .................................................................................................................. 33
4.9 Daisy Chain Connection Diagram......................................................................... 36
4.10 Hot Plug............................................................................................................. 37
4.11 On Screen Display Operation............................................................................. 38
4.12 Troubleshooting................................................................................................. 41

Console user ’ s manual
5
CHAPTER 1 GENERAL INFORMATION
1.1 Overview
The KVM Console is an ideal solution for network administration with multiple servers /
platforms. Their 15-inch and 17-inch 19-inch large size TFT LCD color display and
ultra-low-profile compact industrial keyboard / touchpad provide the user-friendliest and most
reliable environment for network administrators. All these functions are integrated in a 19-inch
1U space with rugged construction design to achieve ultra space saving and high reliability for
high quality industrial network applications.
The KVM Console drawers provide superior picture quality and state-of-the-art features
mounted in an industrial grade, rack mount drawer. The drawer forms a rugged enclosure
that protects the monitor from industrial hazards and permits easy access to monitor
controls.
The KVM Console monitors provide flicker-free color images at optimal resolutions. The
monitors’0.264mm pixel pitch ensures crisp images with clear definition, even at high
resolutions. The KVM Console monitors are intelligent, microprocessor-based, and have
an ergonomically designed display.
The KVM Console monitors employ the latest in active matrix thin film transistor (TFT)
technology, providing crisp screen images and wide viewing angles. Unlike CRT monitors,
LCD monitors are inherently immune to the magnetic fields commonly found on the plant
floor or communications centers. LCDs are also typically brighter than conventional CRT
technology, making them ideal for the high ambient lighting conditions found in many of
today's factory environments. On-screen menus allow for display adjustments. In
addition, the monitors' Plug-n-Play+ features support Windows 95/98,NT and XP, while a
universal power supply ensures global applicability.
The KVM Console monitors are compatible with most analog RGB (red, green, blue) display
standards, including PS/2, optional for Sun Micro System, Apple Macintosh Centris, Quadra,
and Macintosh II family signals. The LCD monitor is capable of displaying crisp and vibrant color
graphics with VGA, S2GA, XGA (non-interlaced), and most Macintosh compatible color video
cards.

Console user ’ s manual
18
CHAPTER 2 PANEL CONTROLS AND OSD FUNCTIONS
2.1 Auto tune
Press the “auto tune”bottom. The panel will adjust the display size automatically and
also tune the panel to its best condition.
2.2 Input Source
1. Press the “menu”bottom.
2. Use the “Down”and “Up”bottom to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3. Press the “menu＂bottom to enter,and you will see:
VGA/DVI
4. Use the “Down”and “Up”bottom to select the input source of signal.
5. Press the “menu”bottom to enter
Controls Description
Soft power on/off button. Adjacent LED is lit when on.
Auto Auto-synchronize and scale down display to any valid
factory preset timings.
Up Press to scroll the function you want to adjust.
Down Press to scroll the function you want to adjust.
Menu To access the main menu. This bottom also acts as the
“Enter”bottom.

Console user ’ s manual
19
2.3 Brightness
1. Press the “menu”bottom.
2. Use the “Down”and “Up”bottom to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3. Press the “menu＂bottom to enter.
4. Use the “Down＂and “Up＂bottom to adjust the brightness of the display.
5. Press the “menu”bottom to enter.
2.4 Contrast
1. Press the “menu＂bottom.
2. Use the “Down”and “Up”bottom to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
1. Press the “menu”bottom to enter.
2. Use the “Down＂and “Up＂bottom to adjust the contrast of the display.
3. Press the “menu”bottom to enter.
2.5 Color
1. Press the “menu”bottom.
2.Use the “Down”and “Up”bottom to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color

Console user ’ s manual
20
Position
Language
Recall
Exit
3.Press the “menu”bottom to enter. And you will see:
Icon Description
9300°K To set CIE coordinates at 9300°K color
7500°K To set CIE coordinates at 7500°K color
6500°K To set CIE coordinates at 6500°K color
User To set user defined CIE
Auto color To auto adjust color
Return To exit and return to the previous page
4.Use the “Down”and “Up”bottom to adjust the color of the display.
5.Press “menu”to enter.
2.6 Position
1. Press the “menu”bottom.
2. Use the “Down”and “Up”bottom to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3. Press the “menu”bottom to enter. And you will see:
Icon Description
Image Pos To adjust the position of the image.
OSD Pos To adjust the position of the OSD.
Return To exit and return to the previous page
4. Use the “Down”and “Up”bottom to scroll.
5. Press the “menu”bottom to enter.
2.7 Language
1. Press the “menu”bottom.
2. Use the “Down”and “Up”bottom to scroll.