I-Tech RKP215-1602 User manual

User
Manual
RKP215 /217/219-1602
2U15 /17 /19 Rackmount
LCDKeyboardDrawerwith
PS/22-ConsoleKVMSwitch

Rev. : 1.0
P.1
1.TableOfContent
RKP215 / RKP217 / RKP219UserManual
1.TableofContent P.1
2.Introduction P.2
3.Features P.2
4.PackageContents P.3
5.Optional Accessories P.4
6.PeripheralProducts P.4
7.ImportantSafeguards P.5
8.StructureDiagram P.6
9.DimensionDiagram
RKP215-1602P.7
RKP217-1602P.8
RKP219-1602P.9
10.LCD Session
LCD MembraneDiagramP.11
LCD OSDControl
MainMenuP.11
Sub Menu P.12-13
ResolutionSettings
ForWindowsP.14
ForSUN Servers P.15
11.KVMSession
Front ViewP.17
RearViewP.18
Installation StepsP.19
Cascading P.20
12.StartUp P.21
HotKeyCommand P.21
HotKeyCommand OperationP.22-23
KVMOSDControl
OSDstructureDiagramP.24
OSDMenu OperationP.24
SettingsSession P.25
13.FAQ P.26-27
14.TechnicalSpecification P.28-29

RKP Seriesisacombination ofkeyboard,mouseand monitorintoadrawer,
withfeaturessuchasflip-updesign, adjustablebrackets,builtinLCD OSDto
provide effectiveassistant foran administratortocontrolPCsystem.
RKP Seriesprovidescosteffectiveforyourlimited ITbudgetoverusingCRT
and rack mounting. Also, it willbe spacesavingforyourcompact environment
rack and effectiveassistant foran administratortocontrolPCsystem.
2.Introduction
3.Features
RKP215 / RKP217 / RKP219UserManual
Uniquemonitorflipup design allowsviewing throughclosed glass door
of cabinet
Adjustablemounting bracket from390 to790mm (front torear19 )
Threemodelstochoosefrom15 , 17 and 19 LCD Panel
Threekeyboardselectionssupporting multiplelanguages
Front-access lock forsecurity
Suppliedwith12V5Aremotepoweradapter(singlepowersource)
Built-inKVMswitchfunctionforeasy controllingand monitoring upto16
residing servers/ platforms
SupportoneCAT.5remoteconsoleupto500feetawayfromKVM
switch.
Supporteightcharacterspasswordprotectionand searchPCserver
name
Autoscan mode formonitoring PCsand flexiblescan timefrom5~99
seconds
HotPluggable—Addorremovecomputerswithoutpoweringdownthe
switch
EasilyswitchindividualbuttontoselectthePCchannelusingthe
push-button channelselectorswitches, HotKeys, orviathe On-Screen
Display(OSD)Menu
Disclaimer
Thisinformation issubjecttochange withoutnotice.Theproducerofthismanual acceptsno
responsibilityfordamage orclaims,resulting frommisuseormisinterpretation
Rev. : 1.0
P.2

Rev. : 1.0
P.3
4.PackageContents
Before Unpacking
It isvery importanttolocatetheLCD KeyboardDrawerinasuitableenvironment.
The surfaceforplacingand fixing the LCDKeyboardDrawershouldbe stableandlevel
ormounted intoasuitablecabinet.
Makesurethe placehasgood ventilation,isout ofdirect sunlight, awayfromsourcesof
excessivedust, dirt,heat, water,moistureand vibration.
Convenienceforconnecting the LCD KeyboardDrawertothe related facilitiesshouldbe
well considerstoo.
Unpacking
The LCD KeyboardDrawercomeswiththe standardpartsshownasabove. Checkand make
suretheyareincluded and ingood condition.Ifanything ismissing,ordamage,contactthe
supplierimmediately.
LCDMonitorDrawerwithPS/2KVMSwitch(TwoConsoles)1Piece
UserManual1Piece
DCPowerAdapter1Piece
PowerCord1Piece
Mounting Bracket1Pair
Fasteners4Pieces
CD-63-in-1KVMcable8Pieces
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.4
5.OptionalAccessories
6.PeripheralProducts
ModelDescription
CV-8018-Port PS/2KVMswitch
CV-1601 16-Port PS/2KVMswitch
CD-6/10/ 156ft / 10ft / 15ft 3-in-1KVMcable
CA-6/ 10/ 156ft / 10ft / 15ft PS/23-to-3Cascade cable
SUN-31SUN / iMACUSB toPS/2adapter
KVMCable
CascadeCable
Conversion Adapter
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.5
7.Important Safeguards
RKP215 / RKP217 / RKP219UserManual
Pleaseread all of theseinstructionscarefullybeforeyou usethe device.
Savethismanualforfuturereference.
Unplug the LCDKeyboardDrawer fromthepoweroutlet beforecleaning.
Do notsprayliquidcleaners oraerosoldirectlyon the device.Wetaclothwith
aneutraldetergent(e.g.clean water)and squeezeittight, then clean the
screen slightlywithit.
Do not exposetheLCDKeyboardDrawerdirectlytorain, water, moistureor
sunlight.
Do notattempttoservicethe deviceyourself.Improperoperation mayvoid
yourwarranty. Referallservicing toqualified servicepersonnel.
Safestorageenvironmentofthe LCD KeyboardDrawerisranging between –
20oCand 60oC.Permanentdamage couldoccurifthe LCD KeyboardDrawer
isstored outside the saferange.
Unplugthe keyboarddrawerwithLCDKeyboardDrawerimmediatelyand call
aqualified servicepersonnelunderthe followingconditions:
1.If the LCD KeyboardDrawerhasbeen exposedtorain,liquidorwater.
2.If the LCD KeyboardDrawerhasbeen droppedorthe casing hasbeen
damaged.
Whatthewarrantydoes notcover
1.Anyproduct,onwhichtheserialnumberhasbeendefaced,modifiedor
removed.
2.Damage,deteriorationormalfunction resulting from:
a)Accident, misuse,neglect, fire,water,lightning,orotheractsofnature,
unauthorizedproductmodification,orfailuretofollowinstructionssupplied
withthe product.
b)Repairorattemptedrepairbyanyonenotauthorized byus.
c)Anydamageof theproductduetoshipment.
d)Removalorinstallationof the product.
e)Causesexternaltotheproduct, suchaselectricpowerfluctuation orfailure.
f)Useof suppliesorpartsnot meetingourspecifications.
g)Normalwearand tear.
h)Anyothercauseswhichdoesnotrelatetoaproduct defect.
3. Removal, installation,andset-upservicecharges.

Rev. : 1.0P.6
8.StructureDiagram
RKP215 / RKP217 / RKP219UserManual
•
‚ƒ„…†
‡
Š
Š‰ˆ
1.Keyboard
2.Aluminiumfrontpanel
3.Class AactivematrixTFT LCD panel
4.Analogtodigitalsignalconverter board
5.Rearmetalcase
6.LCD inverter
7.LCD membrane
8.Ball bearing telescopicslideswithstopper
9.Adjustablemountingbracket
10.KVMmembrane&KVMboard

Rev. : 1.0
P.7
RKP215-1602 2U15 LCD Keyboard Drawer withPS/2KVM
(TwoConsoles)
9.Dimension Diagram
RKP215 / RKP217 / RKP219UserManual
15 LCD

RKP217-1602 2U17 LCD Keyboard Drawer withPS/2KVM
(TwoConsoles)
9.Dimension Diagram
RKP215 / RKP217 / RKP219UserManual
17 LCD
Rev. : 1.0
P.8

RKP219-1602 2U19 LCD Keyboard Drawer withPS/2KVM
(TwoConsoles)
9.Dimension Diagram
RKP215 / RKP217 / RKP219UserManual
19 LCD
Rev. : 1.0
P.9

Rev. : 1.0
P.10
LCD
Session
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.11
LCD MembraneDiagram
Left Right Exit
Menu/SelectionPower
MAINMENU
BRIGHT/CONTRAST
AUTOADJUST
PHASE/CLOCK
H/VPOSITION
MISC
RESET
MainMenu
Bright/ Contrast
Toenterintothe Bright, Blacklevel&Contrast sub-menu
AutoAdjust
Toperformautomaticoptimisationsof allfunctions
An “Adjusting message isdisplayed duringthe process
Phase / Clock
Toenterintothe phase&clock sub menu
H/VPosition
Toenterintothe H/VPosition sub-menu
MISC
Toenterintothe MISCsub-menu
Reset
Reset tothedefaultfactorysettings
10.LCD Session
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.12
Bright/ Contrast
1.Brightness
Toperformbrightness adjustment of the inputRGBsignal
UsetheLeft&Rightbuttontoadjust andbuttonto “Brightness
2.Contrast
Toadjust the contrastlevelof theinput signal
Usethe Left&Right button toadjust and button to “Contrast
Phase/ Clock
1. Phase
Toadjust input videosampling clock’sphase
Usethe Left&Right button toadjust and button to “Phase
2. Clock
Toadjust input videosampling clock
Usethe Left&Right button toadjust and button to “Clock
H/VPosition
1. H.Position
Toadjust the horizontalsizeof theframe
Usethe Left &Right button toadjustand buttonto “H.position .
2.V.Position
Toadjust the verticalpositionof theframe
Usethe Left&Right button toadjust and button to “V.position .
10.LCD Session
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.13
MISC
1.Information
The firstheaderrowshowsthe current resolution setup
The second headerrowshowsthe horizontalfrequency ofthecurrent
input signal
The thirdheaderrowshowsthe verticalfrequency ofthecurrentinput
signal
2.OSDTimer
Tomodifythe durationof theOSDtime-out
3.Color
a) 5500K
Select ColourTempat 5500K
b)6500K
Select ColourTempat 6500K
c) 9500K
Select ColourTempat 9500K
d)User
Change ColourTempbymanual
4.Language
Toselectthelanguageof OSDmenu 7Languages:
(1)English
(2)Japanese(日本語)
(3)Chinese(中文)
(4)German
(5)Francais
(6)Espanol
(7)Italiano
10.LCD Session
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.14
ResolutionSettings
ForMicrosoftWindows
Step1 –Pressrightclickon the desktop
Step2 –Choose “Properties
Step3 –Change the “Screen Resolution
Step4 –Change the “Screen refreshrate
10.LCD Session
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.15
10.LCD Session
ResolutionSettings
ForSUN Servers
ResolutionconfigurationproceduresshouldberunbyqualifiedSUN
serveradministrator
Sun Serversareusing resolution at 1152 x900x76Hz.
Supported resolutionmode for15 LCD:
1024 x768 x70/75Hz
Supported resolutionmode for17 LCD:
1280 x1024 x75Hz
You needtochange the SunServerresolution beforeyouconnectto
LCD Display.
Pleasedothe following procedurestochangethe resolution settings:
1.Asroot:
You mayfind the followingcomment “/user/sbin/m64config .
2.Toviewcurrentresolution:
Type “/user/sbin/m64config –prconf .
3. Tochange to1024x768 @70MHz:
Type “/user/sbin/m64config –res1024x768x70 now .
4.The screen willbe rubbish.
5. Then type “pkillXsun .
And Type “pkillXsession torestart theXsession.
UnderCommon Desktop Environment (CDE).
TochangetheOpenBootresolution,youcantypethefollowing
command inOKprompt.
1.InOKprompt, type “setenvoutput-devicescreen:r1024x768x70 .
2.Type “printenv toconfirmthe resolutionhasbeen changed
to1024x768x70Hz.
3.Then type, “reset torestartthe system.
Note: RemembertoRESTARTthe serveraftertheseprocesses.
Note: RemembertoRESTARTthe serveraftertheseprocesses.
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.16
KVM
Session
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.17
FrontView
ChannelSelect Button
Selected Channel BankButton
BankNo.
Shift ButtonOnlineChannel
LEDIndication
Selected Channel-Displayedchannelonmonitor &redinLED.
Channelselect button-Press toselect channelfrom1 –8.
Shiftbutton-Press &Holdfollowwithachannelbutton
toselect channelfrom9 –16.
OnlineChannel-GreenLEDstatethePChasconnected
andpoweron.
Bankno.-Displaythe Bankno. from1 –8.
Bankbutton -Select the bankfrom1 –8(forcascade only).
11. KVMSession
RKP215 / RKP217 / RKP219UserManual

Rev. : 1.0
P.18
11. KVMSession
RearView
Cascade
Port Channel
Port
DC
Power
DC Power -connecttoexternal12VDC poweradapter.
CascadePort -connecttoadditionalKVMswitchforchannel
expansion.
LANPort-connecttoreceiverbyUTP/ STPcable.
Channel Port -connecttoPCcomputerwithCD-63-in-1KVMcable.
RKP215 / RKP217 / RKP219UserManual
RKP2XX-1602 (LocalConsole)
LAN
Port
RKP2XX-1602 (RemoteConsole)
•‚ƒ„…
• DC Power-connecttoexternal12VDC poweradapter.
‚ LANPort -connecttolocalconsolebyUTP/ STPcable.
ƒ KeyboardPort -connecttoPS/2keyboard
„VGAPort -connecttoVGAMonitor
…Mouse Port-connecttoPS/2mouse

Rev. : 1.0
P.19
11. KVMSession
RKP215 / RKP217 / RKP219UserManual
InstallationSteps
Beforeinstallation,pleasemakesureall computersareturned on and its
operatingsystemarerunningproperlywithkeyboardand mouse.
1.Connect the3-in-1KVMcabletothe one of yourserver.
MiniDin6-pinMaleconnectortothe USB Port
HDDB15-pinMaleconnectortothe VGAPort
2.Plug thepoweradapterincluded tothe switch.
3.Connect STP/ UTPcabletotheswitch.
4.Connecttheanotherendofthe3-in-1cabletotheLCDKeyboard
Drawer
5.Connectanotherendofthe STP/UTPcableand mouse,keyboard&
monitortothe receiver.
6.Reset PS/2KVMSwitch(TwoConsoles)bymembrane
DC
Power
.............
Remote
Console
Local
Console