i5 Industries Kai Credenza C2466 User manual

C2471
Assembly: Credenza Shell
24x71 Credenza Shell
MODELS: C2466 24x66 Credenza Shell
Scan Me
to watch
Assembly
Instructions

Place all laminated parts on a clean and smooth surface such as •
a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware. •
Remove all wrapping materials, including staples & packing •
straps before you start to assemble.
Line up holes for cam locks. •
Put on sticker caps last. •
Keep all hardware parts out of reach of children. •
Inspect all holes to ensure their isn't any debris. •
TWO PEOPLE ARE
REQUIRED TO
ASSEMBLE AND MOVE
THIS MODEL
Required tools:
Recommended tools:
CREDENZA SHELL INFORMATION
Flathead or Philips
#2 Screwdriver
#2
Highly recommended when
assembling: L-shape
configuration or
attaching pedestals
4mm

PART QTY.
MODESTY PANEL 1
RIGHT SIDE END PANEL 1
LEFT SIDE END PANEL 1
TOP 1
PART QTY.
Metal Pin 15
Cam Lock 15
Set Screw 15
Cap Sticker 15
Adjustable Glide 4
Wood Dowel 15
Grommet Hole Cover 2
PARTS & HARDWARE
CREDENZA SHELL
B
C
D
E
F
G
A

3X (A)
3X (F)
1. HARDWARE INSTALLATION
Insert by hand only
Complete this step for both the left and right end support.
CREDENZA SHELL
F

9X (F)
2. HARDWARE INSTALLATION
Insert by hand only
9X (A)
CREDENZA SHELL

6X (B)
6X (C)
3. ASSEMBLE END SUPPORTS TO MODESTY
CREDENZA SHELL

4.
PLACE TOP ON ASSEMBLED MODESTY AND END SUPPORTS
CREDENZA SHELL
(E)

2X (G)
5. PUT IN GROMMETS & PUT ON CAP STICKERS
Note: Place cap stickers (D) on any exposed holes.
CREDENZA SHELL